Thermador Dishwasher Parts

The Check Valve is an OEM part for Bosch dishwashers. It prevents the backflow of water into the dishwasher after it has been drained, ensuring that dirty water does not re-enter the appliance and contaminate clean dishes.

Causes of a bad check valve can include blockages from debris or food particles, wear and tear over time, or damage from improper installation or handling. These issues can impair the valve's ability to effectively prevent backflow.

Symptoms of a bad check valve include:

• Water not draining properly from the dishwasher
• Dirty water pooling at the bottom of the dishwasher
• Foul odors coming from the dishwasher
• Residual water remaining in the tub after the cycle ends

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Reel is the rotating spool that winds or guides a cord, cable, or belt inside the appliance. It maintains smooth motion and proper tension so the connected mechanism operates reliably without binding, slippage, or jams.

• Guides or winds a cord, cable, or belt on a central hub
• Maintains alignment and tension for smooth, consistent operation
• Helps prevent snagging, overwind, or uneven take-up
• Wear or damage can cause noise, binding, loss of tension, or failure to retract/advance

• Disconnect power and any utilities before servicing the appliance
• Access the assembly per your service manual; note routing and orientation with photos
• If spring-loaded, release and set tension carefully to avoid injury
• Transfer any clips, fasteners, or connections from the original part and verify smooth operation before reassembly

The Tine Row Holder is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, it secures the tine row assembly in place to direct spray patterns.

Symptoms of a bad tine row holder include:

• Improper spray distribution inside the tub
• Loosening of the tine rows from their intended position  
• Visible cracks or damage to the holder's mounting points

Causes of failure may be normal wear over time or accidental impacts that compromise integrity. Mineral buildup could also affect its securing function.

This replacement holder is also compatible with Gaggenau and Thermador dishwashers.

The Rinse Aid Door (with Gasket) is an OEM replacement part for Bosch dishwashers. It is responsible for covering and sealing the rinse aid dispenser. Problems with a rinse aid door can cause leaks during washing.

Causes of issues may include wear over time, damage to the door or integrated gasket. This can compromise the seal needed to contain rinse aid.

Symptoms of a problem rinse aid door:

• Observing liquid around the dispenser area 
• Water spots after a cycle
• A loose or damaged gasket allows contents to leak underneath.

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models

The Water Valve Assembly is an OEM part for Bosch dishwashers. This assembly controls the flow of water into the dishwasher, ensuring that the correct amount of water is used during the wash cycle for optimal cleaning performance.

Causes of a bad water valve assembly can include mineral deposits from hard water, wear and tear over time, or electrical issues that prevent the valve from opening or closing properly. These issues can lead to improper water flow or leaks.

Symptoms of a bad water valve assembly include:

• Dishwasher not filling with water
• Insufficient water during the wash cycle
• Water leaks from the valve area
• Unusual noises when the valve is operating

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hinge Cable is an OEM part for Bosch dishwashers. It plays an essential role in the mechanism that controls the movement of the dishwasher door, allowing it to open and close smoothly and safely. This cable connects the door to the spring, providing the necessary tension and support to prevent the door from slamming shut or dropping open too quickly, which can be hazardous and potentially cause damage.

Symptoms of a failing Hinge Cable include:

• The dishwasher door suddenly dropping open
• Difficulty in opening or closing the door smoothly
• The door feeling unusually heavy or not staying in place when opened
• A snapping sound when trying to open or close the door, indicating a potential break

Causes of a bad hinge cable often involve fraying or snapping due to the constant tension and movement, general wear from frequent use, or corrosion from exposure to moisture and detergents.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: This is a Cable Kit. (Includes 2 cables)

The Drain Pump is an OEM replacement part for Bosch dishwashers. It is responsible for pumping out dirty water from the dishwasher tub at the end of each cycle. The drain pump works to thoroughly empty the tub in a timely manner to facilitate a smooth transition to the next cycle.  

Causes of a bad drain pump can include a clogged impeller or blockage of debris inside the pump housing that inhibits proper water flow. 

Symptoms of a bad drain pump include:

• Incomplete draining of water at the end of cycles 
• Water remaining or pooling at the bottom of the tub
• Loud grinding or clicking noises emanating from the pump area
• Cycles failing to advance or resume properly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

Note: Due to a factory design change, connector part# 00623143 may also be needed.

The Detergent Cup Latch W Spring is an OEM part for Bosch dishwashers. This latch securely closes the detergent dispenser cup, containing detergent during the wash cycle.

Causes of a bad latch can include wear and fatigue of the latching spring over many uses.

Symptoms of a bad detergent cup latch include:

• The cup popping open unexpectedly during a wash
• Difficulty fully closing and hearing the "click" of the latch
• Detergent leakage resulting in reduced cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Tine Clip Kit is an OEM part for Bosch dishwashers. This kit includes clips that secure the tines in the dishwasher rack, ensuring that dishes stay in place during the washing cycle for optimal cleaning performance.

Causes of a bad tine clip can include wear and tear from regular use, exposure to high temperatures and detergents, or accidental damage. Faulty or broken tine clips can result in unstable tines, making it difficult to properly load and organize dishes in the dishwasher.

Symptoms of a bad Tine Clip include:

• Tines not standing upright or falling over
• Difficulty in loading or arranging dishes
• Rattling noises during the wash cycle
• Loose or missing clips

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Micro Filter Basket Assembly is an OEM part for Bosch dishwashers. This component is essential for trapping food particles and debris during the wash cycle, preventing them from re-entering the clean water circulation. By effectively filtering out residues, the micro filter ensures that your dishes emerge spotless and free from food remnants. 

Causes of a bad micro filter basket assembly include clogging from accumulated food particles, wear and tear from regular use, and damage such as cracks or warping that can compromise its filtering capability.

Symptoms of a bad micro filter basket assembly include:

• Dishes not getting thoroughly cleaned
• Visible debris remaining on dishes after washing
• Unusual noises from the dishwasher indicating struggling pumps or motors

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Pump is an OEM part for Bosch dishwashers. This pump is responsible for removing water from the dishwasher at the end of the wash and rinse cycles, ensuring that the appliance functions efficiently and that dishes are properly cleaned and dried.

Over time, the drain pump can become clogged with debris, suffer from electrical issues, or experience mechanical wear. These issues can lead to the pump failing to remove water effectively, impacting the overall performance of the dishwasher.

Symptoms of a bad Drain Pump include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Error codes related to drainage issues
• Water pooling at the bottom of the dishwasher

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Hose is an OEM part for Bosch dishwashers. This hose is responsible for carrying the wastewater out of the dishwasher and into the household plumbing system during the draining cycle. It ensures the efficient removal of dirty water, allowing the dishwasher to function correctly and maintain optimal cleaning performance.

Causes of a bad drain hose can include blockages from food particles or debris, kinks or twists in the hose, or damage from wear and tear over time. If the drain hose is compromised, it can lead to drainage problems and potential water leaks.

Symptoms of a bad drain hose include:

• Water not draining from the dishwasher
• Puddles of water around or under the dishwasher
• Error codes related to drainage issues
• Visible damage or cracks in the hose

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Hose is an OEM part for Bosch dishwashers, designed to facilitate the efficient and reliable expulsion of wastewater from the appliance to the household drainage system. This component ensures that used water is properly drained out after each wash cycle, preventing water from backing up and causing issues within the dishwasher.  The hose measures 5 feet. This Bosch dishwasher drain hose comes with one O-ring. For the 1-foot drain hose order 00298556.

Causes for replacement may include clogs from food particles or debris, physical damage such as cracks or splits that lead to leaks, or a hose that has become stiff and noncompliant over time.  

Symptoms of a bad Drain Hose include:

• Water remaining in the bottom of the dishwasher after the cycle has completed, indicating a failure to drain.
• Leaks under the dishwasher, which may be a sign of a cracked or damaged hose.
• Poor dishwasher performance or error codes related to drainage problems.

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Lid is an OEM part for Bosch dishwashers, designed to cover the detergent dispenser compartment. This lid ensures that dishwasher detergent is contained and released at the correct point in the wash cycle, contributing to efficient and effective cleaning. 

Causes of a malfunctioning detergent lid can range from physical damage, such as cracks or warping that prevent a proper seal, to mechanical failure in the latch mechanism that prevents it from staying closed during the wash cycle. 

Symptoms of a bad Detergent Lid include:

• Detergent not being dispensed properly during cycles
• Water leaking from the dispenser area
• Dishes not being cleaned effectively due to the detergent not releasing at the correct time

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hinge Bushing is an OEM component for Bosch dishwasher models. This bushing acts as a guide and support component for the dishwasher door hinge assembly. It facilitates smooth and quiet opening and closing of the door.

Symptoms of a bad hinge bushing include:

• noise or squeaking coming from the door hinges 
• excess play or looseness feeling in the hinge movement
• difficulty fully closing or opening the dishwasher door

Causes of a bad hinge bushing can be normal wear and tear over the life of the appliance. Small metal particles embedded in the bushing material during manufacturing may also cause premature wear.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Circulation Pump and Motor Assembly is an OEM component specifically designed for Bosch dishwashers. This assembly combines a circulation pump and motor to drive water flow through critical wash cycles. 

Symptoms of a bad circulation pump and motor assembly include:

• Inadequate or inconsistent water flow during washing and rinsing cycles
• Loud or grinding noises coming from the circulation pump motor
• Lengthened cycle times due to reduced water pressures 

Over time, pump impellers and motor components can degrade, leading to diminished performance. If your Bosch dishwasher exhibits any of the above issues, replacing the circulation pump and motor assembly with this OEM part is recommended.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.