Whirlpool Axle, Roller, Pulley Parts

Replacement tub wheel that mounts inside the dishwasher to support the rack track. Restores smooth gliding when worn, cracked, or broken during use.

This small adapter wheel connects to the dryer's encoder mechanism, which helps the control board track drum position and cycle progress. It links the encoder to the drive system, translating mechanical rotation into signals the electronic control can read. Replace this part if your dryer displays error codes related to cycle sensing, fails to advance through cycles properly, or the control board cannot detect drum movement.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

Mounts to the dishwasher's inner tub wall to guide the rack as it slides in and out. Replace worn or broken wheels to restore smooth rack movement.

Motor pulley for dryers. Mounts on the motor shaft to drive the drum belt. Replace if cracked, worn, or causing belt slippage during operation.

This wheel assembly attaches to the lower dish rack and allows it to roll smoothly in and out of the dishwasher tub. It clips onto the rack rail and supports the weight of loaded dishes. Replace this part if the lower rack is difficult to slide, tilts to one side, or if the existing wheel is cracked, missing, or no longer rolls freely.

This bearing helps the appliance's rotating assembly turn smoothly and reduces metal-on-metal wear for quieter, more reliable operation. Replace a worn bearing to address noise and movement issues that affect performance. What it does:

• Supports the drum or tub shaft so it rotates with minimal friction
• Reduces grinding, rumbling, or squeaking noises from the rotating assembly
• Helps prevent excessive wobble or vibration during spin cycles
• Limits metal wear that can lead to leaks or further component damage

• Disconnect power and water before starting work
• Inspect surrounding seals, shafts, and mounting surfaces for wear while replacing the bearing
• Use correct tools and replacement hardware; follow OEM instructions for torque and alignment

This is a small encoder wheel that attaches to the control knob shaft on the dryer. It works with the electronic control board to register the rotation of the selector knob, allowing you to choose cycle settings and options. Replace this wheel if the control knob spins freely without changing settings, clicks inconsistently, or if the dryer no longer responds to knob adjustments.

Replacement pulley for microwave turntable motor assembly. Installs on the motor shaft to drive the turntable rotation. Order if worn, cracked, or missing.

Replace your washer's drive pulley if it's cracked, worn, or damaged. This component mounts on the motor shaft and transfers power to the drum assembly.

Replace your washer's drive pulley if it's cracked, worn, or broken. This component mounts to the motor shaft and helps transfer power to the drum belt.

Replacement pulley for microwave turntable rotation system. Installs on the motor shaft to drive the turntable. Order if your pulley is cracked or worn.