Whirlpool Cooktop Parts

Husband did that. Found a burner cap kit. Said it was simple. Read more

VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more

Door hinge replacement and of course a new fuse. All went very well. Good service and tech support from AppliancePartsPros.com Read more

Replaced Control box, Very easy to install. Remember to DISCONNECT power cord. Read more

Turned off 40 Amp breaker. Removed shelves from oven. Removed two screws in back panel holding element in place. Slowly pulled element free making sure wires stayed attached and not lost in oven insulation. Removed two wires from old element. Attached wires to new element. Pushed wires back into oven rear wall. Reinstalled the previously removed two screws. Turned on breaker. Total time less than 10 minutes. Read more

So after receiving my 2 door hinges, 2 days before est. delivery . All I had to do is take the oven door off, and then remove 4 screws to take the door apart, 4more screws to remove old hinges, replace w/new reassemble and put door back on oven, all in about 40 min. works like new again, Thanks for everything. Read more

• Won't start

By replacing the switch, the front right burner correctly turned on the igniter and worked. Repair took about 5 minutes. Very easy to do. Read more

I ordered the replacement kit from AppliancePartsPros.com. Exactly what I needed, better price than other sites, arrived smack on time. Couldn't ask for more. Site was easy to maneuver. Read more

Trial and error only cooktop unit. Everything mounted into the counter and needed to pull unit out. I figured it was a control switch or the burner itself. Based on costs, I took the less expensive route and replaced the 2 known malfunctioning switches. All on-line videos said it was a 2-3 hour process to replace. I finished mine in less than 30 minutes. Turned breaker back on and it works like a charm. 30 years old and still going strong. Read more

I searched on your website for a replacement stem. Unfortunately the stem is not sold separately. I purchased the entire valve after confirming with your online rep that I was ordering the correct part. I received the valve in 2 days removed the stem and inserted it directly into the existing burner valve. Perfect fit easy installation and burner works as it should. Simply repair and I probably saved $100 by not calling a repair tech to come to my home. Read more

With part ordered from your website. Read more

Pulled the old orifices and submitted a question about the proper replacements for my model. received a prompt reply with links to the correct parts. Added them to my cart and purchased, they arrived soon after and installed easily. Hooked up the range and it works perfectly. Read more