Whirlpool Hinge Parts

Color: Black. Other colors: For biscuit use 2307008T, for white use 2307008AP.

This refrigerator door hinge secures and guides a fridge door for smooth opening and reliable alignment. It restores proper door movement and helps maintain an effective seal to keep temperatures stable. What it does:

• Provides the pivot point that lets the refrigerator door open and close smoothly
• Keeps the door aligned to prevent rubbing, gaps, or uneven sealing
• Helps stop drafts that can cause temperature fluctuations or higher energy use
• Suitable when a bent, broken, or worn hinge causes noisy or misaligned doors

• One door hinge

• Disconnect power and empty the door before starting; follow manufacturer's service manual for safe removal
• Typical install requires removing door trim or shelves to access hinge fasteners
• Re-tighten mounting screws securely and check door alignment; adjust per OEM instructions

A replacement hinge bushing that supports and cushions a refrigerator/freezer or appliance door hinge for smoother movement and reduced wear. Restores correct hinge alignment and helps prevent noisy or stiff door operation. What it does:

• Cushions metal-to-metal contact at the door hinge to reduce wear and vibration
• Helps the door swing smoothly and maintain proper alignment
• Reduces rubbing, scraping noises, and uneven door movement
• Supports hinge pin function to extend hinge life

• Basic hand tools required; appliance diagrams for hinge access
• Remove power or unplug the appliance before servicing where applicable
• Handle door panels carefully; support door weight to avoid damage or injury

This door hinge secures and allows smooth pivoting of a refrigerator door so it opens and closes correctly. It restores proper door alignment and helps maintain a tight seal to preserve cooling performance. What it does:

• Supports the weight of the door and provides a stable pivot point
• Keeps the door aligned to prevent rubbing, gaps, or uneven closing
• Helps the door seal fully to prevent warm air leaks and temperature loss
• Commonly replaced when the door sags, sticks, or makes noise during operation

• One door hinge assembly

• Disconnect power to the appliance before beginning any repair
• Support the door while removing and installing the hinge to prevent injury or damage
• Use factory mounting hardware; tighten fasteners securely but avoid over-torquing
• Check hinge pins and mounting surfaces for wear

This is a replacement door hinge that supports and guides the appliance door for smooth opening and reliable alignment. Restores proper door movement and helps maintain a consistent seal. What it does:

• Secures the door to the cabinet and provides pivoting action for opening and closing.
• Helps maintain proper door alignment to prevent gaps and uneven sealing.
• Reduces door sag, rubbing, and binding that can cause wear or noise.
• Commonly replaced when the door feels loose, drops, or does not close evenly.

• Unplug the appliance or disconnect power before beginning any repair.
• Support the door during removal and installation to prevent damage or injury.
• Use appropriate hand tools; avoid forcing fasteners to prevent stripping.
• Adjust as needed by loosening hinge fasteners, repositioning, then retightening.

This replacement hinge bushing helps the appliance door pivot smoothly and reduces wear on the hinge assembly for quieter, more reliable door operation. Designed to restore proper alignment and movement when the original bushing is worn or damaged. What it does

• Provides a low-friction bearing surface for the door hinge pin to rotate against
• Reduces door sag, sticking, or grinding caused by a worn bushing
• Helps prevent accelerated wear to hinge pins and housings
• Supports consistent door alignment for proper sealing and operation

• One hinge bushing

• Replace only with the exact part specified for your model; disconnect power if working near electrical components
• Typical installation requires removing the door or hinge fasteners; support the door to prevent dropping
• Inspect hinge pins and surrounding housings for wear; replace if damaged to avoid repeat failure

This door hinge secures and guides your appliance door for smooth opening and reliable closing. It restores proper door alignment to reduce gaps, rubbing, and unwanted movement for a better seal and operation. What it does:

• Provides a solid pivot point so the door opens and closes smoothly
• Restores correct door alignment to help maintain a proper seal
• Stops door sagging, rubbing, or dragging that can cause wear or leaks
• Reduces rattling or noisy operation caused by a worn hinge

• Disconnect power or unplug the appliance before starting any repair
• Support the door during removal and installation to prevent damage or injury
• Handle mounting hardware carefully; reuse or replace fasteners as required
• Consider replacing all affected hinges for best alignment

This door hinge secures and allows smooth pivoting of a refrigerator/freezer door, restoring proper door alignment and sealing for efficient cooling. Designed to replace a worn, bent, or broken hinge to improve door operation. What it does:

• Provides a durable pivot point so the door opens and closes smoothly
• Helps maintain correct door alignment to ensure an even gasket seal
• Stops sagging or binding doors that can cause uneven cooling or door gaps
• Fits the factory hinge location and mounts with existing fasteners

• Inspect mounting screws and surrounding trim; replace any stripped hardware before installing
• Support the door during removal/installation to prevent damage or injury
• Use basic hand tools; tighten screws securely but avoid over-torquing
• Follow the appliance manufacturer's service instructions and disconnect power if working near electrical components

This bottom hinge secures and guides the refrigerator/freezer door at the lower pivot, restoring proper door alignment and smooth opening/closing. Durable molded construction matches the original white finish for a clean factory look. What it does:

• Supports the door's lower pivot point to keep the door aligned and balanced
• Allows the door to swing smoothly without binding or dragging
• Helps maintain a proper seal by keeping the door level
• Common replacement when door sags, rubs on the cabinet, or won't close fully

• One bottom hinge (white)

• Unplug the appliance or disconnect power before starting work
• Support the door while removing or installing the hinge to prevent injury or damage
• Typical installation uses basic hand tools; tighten fasteners securely but avoid overtightening
• Check upper hinge adjustment and door leveling

This door hinge secures and guides a single appliance door for smooth opening and reliable alignment. It restores proper door fit and helps prevent sagging, rubbing, or uneven sealing to improve performance and energy efficiency. What it does:

• Supports the door's weight and pivoting motion for controlled opening and closing
• Keeps the door aligned to maintain an effective seal and prevent cold/heat loss
• Stops door sagging or misalignment that can cause rubbing, sticking, or gaps
• Works with existing screws and mounting points to maintain factory movement

• Disconnect power or unplug the appliance before servicing to avoid injury
• Support the door while removing/installing the hinge to prevent dropping or damage
• Reuse original fasteners unless replacements are specified; tighten securely but avoid over-torquing
• Check strike plate and adjacent hinge(s) for wear

This bottom hinge secures the refrigerator door to the cabinet and provides a smooth pivot for opening and closing. Replaces a worn or damaged hinge to restore proper door alignment and operation. What it does:

• Supports the lower door edge and allows the door to pivot smoothly
• Restores correct door clearance and helps stop sagging or scraping
• Keeps the door sealed by maintaining proper hinge alignment
• Works with factory hinge pins and mounting points for a direct fit

• One bottom hinge as shown

• For safety, unplug the appliance or switch off power to avoid electrical hazards
• Support the door fully before removing the old hinge; use a second person if needed
• Inspect hinge pins and mounting screws; replace any damaged fasteners
• Tighten mounting hardware securely and check door alignment after installation