Whirlpool Range / Cooktop / Oven Parts

• Little to no heat when baking

It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad. Read more

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

• Gas igniter glows, but will not light

Went to AppliancePartsPros.com as I have used them in the past for other parts. Parts were easy to identify and find on their website. Very reasonably priced. They shipped out right away and I received them and installed them in time to accommodate out of town guests on the weekend. I have a happy wife. This is a good thing. Read more

Saw a video; went to your website for the part, ordered it and it came the next day! Read more

Replaced it. Read more

My son help me to change, and also he changed the belt as it was old. It took him about 45 minutes overall Read more

I read about the particular error code on blogs online. Most people agreed that it was the keypad membrane that was not working. I have never done any repairs on an appliance, but YouTube had great videos of someone changing out that particular part. I could have ordered the part for less through an appliance supply store locally, but they did not offer any return option on electronics. I ordered through Appliance Parts Pros and they were very prompt in their delivery. I am thrilled to say... Read more

• Won't start

I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more

I immediately turned to Appliance Parts Pros and got the best price for 4 new burners and finding parts for my stove top model is a challenge due to its age. My stove top looks new again! Plus, they were delivered ahead of schedule! Thank you!!! Read more

• Won't start

Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more

• Touchpad does not respond

Replacing the switch membrane restored full function. Relatively easy. Had to pull stove out just a few inches to provide access to two side screws holding control enclosure. Then four screws on bottom edge just above oven door. Then a screw above each burner control. And one screw on the top edge at each corner (right screw additionally holding a ground wire). That allowed the structure to come out. Helper required to hold structure while I worked to unplug the old switch-membrane from... Read more

In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more