Need Help?
Call or text
Fix F1/F2 error codes, dead display, or oven not heating issues. This range electronic control board regulates temperature and timer functions. DIY install in 10-20 minutes.
Our oven went out because of a power failure while the oven was on. I purchased an ignitor from a local repair place but it still would not work. We were told it could be the control panel. We ordered another ignitor just in case and also the control panel. We put both parts in, turned on the gas and electric and the oven came right on, I am a very happy wife. This company is great, they are not only fast on shipping, there customer service is very concerned about your identify when you order... Read more
Self-adhesive foam seal creates a tight barrier between oven components to prevent air leaks and rattling. Replace when worn or missing to restore quiet operation.
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more
Replacement oven door spring that provides tension for smooth opening and closing. Install when original spring is broken, worn, or missing for safe use.
Ordered two new springs and clips. Pulled out the bottom drawer and replaced the old spring and the one that had broken. This only took about ten or fifteen minutes and was very easy. Now the door works as it should. Read more
Fix burners that won't spark or ignite. This switch harness connects igniters to controls. Takes 1 hour with basic tools and torx driver.
I called a rpair service. The men came to the house, torn apart the stove top and advised Replacement of the wire harness. The trip charge of $100 would be deducted from a repair bill of $350, thus they needed an additional $150 for parts and $100 for labor after paying the trip charge. I bought the harness for $60, and the star bits I needed for my drill for $10. My son and I installed the new harness in about 30 minutes, which included a thorough cleanup, saving us $180. Read more
Replaces worn, cracked, or unresponsive oven control panel touch pad. Installs on the front control display where buttons are pressed to operate functions.
I read about the particular error code on blogs online. Most people agreed that it was the keypad membrane that was not working. I have never done any repairs on an appliance, but YouTube had great videos of someone changing out that particular part. I could have ordered the part for less through an appliance supply store locally, but they did not offer any return option on electronics. I ordered through Appliance Parts Pros and they were very prompt in their delivery. I am thrilled to say... Read more
Black burner cap that sits atop the gas burner base on your range. Replace if cracked, chipped, discolored, or missing to restore cooktop appearance.
I ordered the burner cap set. Read more
Fix F5-E1 error code or door stuck locked after self-clean cycle. Includes lock motor and switch. Video guide available. 30-minute DIY repair.
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch... Read more
Controls gas flow to individual cooktop burners on gas ranges. Replace if valve stem is bent, broken, or stuck, preventing smooth knob operation or shutoff.
What you will need: * replacement parts * small and regular Phillips screwdrivers * small wrench * soapy water in a spray bottle or leak detection spray Take apart the top of the stove control unit 1) turn off the gas to the stove, in my case I cannot get to the shutoff valve easily so I ended up turning off the electricity to the stove at the fuse box as that forces an emergency shutdown of the gas supply internally of the stove. 2) remove all 5 knobs, the grates at the top and open the oven... Read more
Front leveling foot adjusts range height for stability. Replaces cracked, broken, or missing feet. Ensures proper leveling to reduce vibration.
Another perfect part from Appliance Parts Pros. Read more
Oven won't heat or heats too slowly? A failed bake element is the likely cause. This DIY repair takes about 10 minutes with basic tools. Restores heat.
It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad. Read more
Range won't heat or display is blank? The electronic control board coordinates all oven functions. DIY replacement in 10-30 minutes with basic tools.
Oven is a slide in. I pulled it out just a Few inches and removed 8 screws and Pulled the face down to expose the unit. The control unit had 4 screws and 4 Plugins. It only took me less than 10 Minutes to replace unit and slide back In place. Read more
Horizontal oven door seal for top and bottom edges. Replace when worn to restore even heating and efficient baking. Hooks into slots on door frame.
A new ignitor was installed, and a new light switch was installed Read more
Replacement control knob for range burner or oven temperature. Installs on control panel. Replace when cracked, broken, or missing. Easy snap-on installation.
I ordered the knob and had it back and on my range before my pickles were ready to can. Loved the fantastic response time. Read more
Oven won't light or smells gas? This bake burner spark electrode creates the ignition spark to light the flame. Simple DIY fix restores reliable ignition.
Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more
Burner head mounts on your cooktop to distribute gas evenly for a steady flame. Replace if cracked, worn, or damaged to restore proper flame pattern.
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more
White control knob for gas range burners and oven controls. Replaces missing, cracked, or broken knobs. Installs on control panel to restore functionality.
Ordered the knob and put it on ..works just fine Read more