Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Maytag MDG16CSBWW: 07 - Motor Drive Parts

Parts for Maytag MDG16CSBWW: 07 - Motor Drive Parts

Location on Diagram
Part Description
Price & Availability
001
Product photo
By: Whirlpool
Part Number: WP33001789

This dryer blower housing encloses the blower wheel and directs air from the drum through the lint filter to the exhaust vent. Replacing a damaged housing restores proper airflow for consistent drying and helps keep lint contained within the airflow path.

  • Encloses and supports the blower wheel while channeling air from the drum to the exhaust
  • Maintains correct airflow and back pressure for efficient drying performance
  • Replace if the housing is cracked, warped, melted, or otherwise damaged
  • Typical symptoms include weak vent airflow, longer dry times, rattling or scraping from the blower area, or visible lint leakage
What's included: 1 blower housing Install notes:
  • Disconnect power; if gas, also shut off the gas supply
  • Access the blower area by removing the lower/front panel and lint ducting as required by your model
  • Transfer the blower wheel and any brackets from the old housing; clean lint from ducts before reassembly
  • Ensure the housing seats fully and all duct connections are tight; spin the blower by hand to verify clearance before restoring power

More
$78.71

IN STOCK
Ships Today Guaranteed
Add to Cart
002
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP33001799
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

002
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP1163839

Specs: 10 - 16 x .375

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

003
Best Seller
Product photo
4.9 (193)
By: Whirlpool
Part Number: WP9703438

This is a snap retaining ring that holds the drum support roller in place on its shaft inside the dryer. It prevents the roller from sliding off the axle during operation. Replace this clip if the drum support roller is loose, the dryer makes thumping or rumbling noises, or if the original retaining ring is missing or damaged during a roller replacement.

More
$6.41

IN STOCK
Ships Today Guaranteed
Add to Cart
004
Product photo
5.0 (3)
By: Whirlpool
Part Number: WP33002797

Dryer making loud noise or won't dry? A cracked or loose blower wheel often causes poor airflow. Moderate DIY repair, 1-2 hours with basic tools.

More
$84.95

IN STOCK
Ships Today Guaranteed
Add to Cart
004
Best Seller
Product photo
4.9 (41)
By: Whirlpool
Part Number: 33001790

Fix loud grinding noises in your dryer with a new blower wheel. This fan circulates air to dry clothes efficiently. DIY-friendly repair.

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
005
Best Seller
Product photo
4.9 (51)
By: Whirlpool
Part Number: WP312967

The Clamp is an OEM part for Whirlpool dryers. This clamp ensures tight and secure connections within the dryer, particularly in securing ducts and vents that are essential for proper airflow and operation. 

Clamps may need replacement due to loss of tension, corrosion, or damage from regular use. A compromised clamp can lead to operational issues such as prolonged drying times or excessive noise, resulting from loose parts or improper ventilation.

Symptoms of a bad Clamp include:

  • Loose or detached vents or hoses, leading to inefficient dryer operation.
  • Increased drying times, as a result of compromised airflow from unsecured ducts.
  • Unusual vibrations or noise, indicating that internal components may not be securely fastened.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
006
Product photo
5.0 (4)
By: Whirlpool
Part Number: WP33002917

Specs: No.8X1/2 HEX WASHER HEAD

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
007
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

More
$9.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
008
Product photo
By: Whirlpool
Part Number: WP306966
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

008
Best Seller
Product photo
4.8 (27)
By: Whirlpool
Part Number: WP694674

The Cycling Thermostat is an OEM part for Whirlpool dryers. It regulates and monitors the temperature inside the dryer during the drying cycle. It ensures that the dryer doesn't overheat and prevents potential damage to clothes or the dryer itself.

Causes of a faulty cycling thermostat can include wear and tear over time, electrical issues, or sensor malfunction.

Symptoms of a bad cycling thermostat may include:

  • Clothes taking longer than usual to dry
  • Inconsistent drying results
  • Overheating or burning smell
  • The dryer not heating at all

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$48.46

IN STOCK
Ships Today Guaranteed
Add to Cart
009
Product photo
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Today Guaranteed
Add to Cart
010
Best Seller
Product photo
5.0 (28)
By: Whirlpool
Part Number: WP33001762

Dryer won't start or run? A blown thermal fuse is the likely cause. This safety component cuts power if temperatures get too high. Easy 15-min fix.

More
$48.46

IN STOCK
Ships Today Guaranteed
Add to Cart
012
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

  • Increased vibration or noise during the wash or spin cycle
  • The washing machine wobbling or becoming unsteady
  • Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

013
By: Whirlpool
Part Number: 33002711
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

014
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP1163839

Specs: 10 - 16 x .375

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

015
Best Seller
Product photo
4.9 (7)
By: Whirlpool
Part Number: WP33002795

This genuine replacement part is a drive motor for dryers. The drive motor is the main engine that allows the dryer drum to rotate. If the drum is no longer spinning properly, the drive motor might need to be replaced. Luckily this is a relatively simple process.To replace the drive motor, begin by unplugging the dryer. Once it is powered off, uninstall the front panel of the dryer by removing the screws that attach it. After that, lift the top panel above the drum so that it is vertical and no longer covering the drum. Then disconnect the wires from the moisture sensors with a screwdriver by pressing down on the locking tab. Once the wires have been removed, lift the drum out from the dryer to gain access to the drive motor. Using a socket wrench, remove the blower wheel from the motor assembly. Then remove the old drive motor by unthreading the mounting screws that attach it. Install the new drive motor and reassemble the dryer. This OEM replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dryers.

More
$177.66

IN STOCK
Ships Today Guaranteed
Add to Cart
015
Best Seller
Product photo
4.9 (76)
By: Whirlpool
Part Number: W10410997

Dryer drum not turning or motor buzzing after running? A faulty drive motor is likely the cause. DIY repair with video guidance in 1-2 hours.

More
$135.56

IN STOCK
Ships Today Guaranteed
Add to Cart
016
Product photo
4.7 (3)
By: Whirlpool
Part Number: WPY015825

This is a metal clip that secures the drive motor in place within the dryer cabinet. It clamps around the motor housing to prevent movement during operation. Replace this clip if it is broken, missing, or bent, which can cause the motor to shift and create excessive vibration, rattling noises, or belt misalignment.

More
$14.41

IN STOCK
Ships Today Guaranteed
Add to Cart
017
Product photo
4.7 (3)
By: Whirlpool
Part Number: WP62739

Replacement 3/8-16 nut that secures bolts and threaded shafts in appliance assemblies. Needed when original nut is stripped, lost, or corroded.

More
$9.07

IN STOCK
Ships Today Guaranteed
Add to Cart
018
By: Whirlpool
Part Number: Y310376
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

019
Product photo
By: Whirlpool
Part Number: 33002157
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

019
Product photo
By: Whirlpool
Part Number: WP33002461
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

019
Best Seller
Product photo
4.9 (26)
By: Whirlpool
Part Number: 33002459

Maintains tension on the idler arm to keep your dryer belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
020
Best Seller
Product photo
4.9 (69)
By: Whirlpool
Part Number: WP6-3705180

Pivoting bracket arm that suspends the idler pulley and routes the drive belt in your dryer. Replace if cracked, bent, or worn to restore proper operation.

More
$55.30

IN STOCK
Ships Today Guaranteed
Add to Cart
021
Best Seller
Product photo
4.8 (113)
By: Whirlpool
Part Number: WPY312527

Fiber washer that maintains idler pulley alignment and belt tension in your dryer. Replace if squeaking, grinding, or pulley wobbles occur.

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
022
Best Seller
Product photo
4.9 (351)
By: Whirlpool
Part Number: WP6-3700340

Replaces the belt tension pulley that maintains proper belt alignment in your dryer. Needed when pulley is squealing, cracked, or worn out.

More
$19.31

IN STOCK
Ships Today Guaranteed
Add to Cart
023
Best Seller
Product photo
4.7 (48)
By: Whirlpool
Part Number: WP354987

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

  • Gas leaks emitting foul odors around seams or vents   
  • Reduced heat conductivity hampering dryer functioning
  • Moisture accumulation shortens fabric lifespan  
  •  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

More
$12.95

IN STOCK
Ships Today Guaranteed
Add to Cart
024
Best Seller
Product photo
4.7 (40)
By: Whirlpool
Part Number: WP315772

Protects the idler arm and ensures smooth belt tension operation in your dryer. Replace if you hear grinding noises or notice excessive arm movement.

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
025
Best Seller
Product photo
4.6 (13)
By: Whirlpool
Part Number: WPY014874

Factory fastener screw secures panels, brackets, and trim inside appliances. Replace missing, stripped, or damaged screws to restore tight fit.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
026
Product photo
By: Whirlpool
Part Number: 33002817
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

026
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

More
$9.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
027
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

More
$9.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
028
By: Lg
Part Number: NLA
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

029
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP3177991

Appliance won't start or trips breaker? This ground screw secures the grounding conductor to the chassis for safe electrical connection. Simple fix.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
030
Product photo
By: Whirlpool
Part Number: WP22003298
$8.69

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
031
By: Whirlpool
Part Number: 410490
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google