Need Help?
Call or text
Show parts
Shaft that secures front drum support rollers in your dryer. Replace if worn, scored, or damaged to restore proper drum alignment and support.
This part is discontinued by the manufacturer and is no longer available for purchase.
10 - 16 x 1/2
Dryer lint screen door provides access to the lint filter. Replace if cracked, broken, or won't close properly. Verify fit with your model number.
Seals the dryer outlet housing to prevent air leaks and maintain venting efficiency. Replace if lint accumulates in cabin or moisture escapes. Verify fit.
Dryer not drying or making loud noise? A loose or damaged blower pulley stops airflow. Use thread locker during install. 45-minute DIY repair.
Covers and protects your dryer's light bulb from heat and debris while diffusing illumination. Replace if cracked, yellowed, or missing. Confirm fit.
Foam seal creates an airtight joint between blower housing and cover. Replace if crushed or torn to restore airflow and prevent heat loss. Confirm fit.
Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.
Dryer not heating or taking too long to dry? This dual heating element restores proper temperature and drying performance. Moderate DIY repair.
Connects power to your dryer's heating element. Replace this wire if it's frayed, burned, corroded, or broken to restore the electrical connection.
This 3/8-16 nut secures appliance components and helps prevent loosening and vibration. Replace a worn, stripped, or missing nut to restore a tight, reliable connection and consistent operation.
Front bulkhead assembly for dryer drum. Replaces cracked, broken, or worn bulkheads that cause drum instability or rattling during operation.
Usually ships within 4 - 14 days
The washer is an OEM replacement part for Whirlpool clothes dryers. This part is located on the drum roller support shaft in your dryer. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed
The Drum Support Shaft for Left Hand Threads is an OEM replacement part for Whirlpool dryers. This component is essential for securing and supporting the drum as it rotates during the drying cycle. It helps maintain the drum’s alignment and stabi
Secures drum support rollers to their shafts in your dryer. Replace if broken, missing, or damaged during roller maintenance to keep drum wheels stable.
Replacement drum support roller for dryers. Mounts on the drum frame to support and guide the drum as it rotates. Replace if cracked, worn, or damaged.
Replacement mounting screw for dryers. Secures internal components and panels. Order if original screw is stripped, missing, or damaged during repair.
Houses and secures the lint filter in your dryer. Replace if cracked, warped, or broken to prevent lint bypass and maintain airflow. Verify fit by model.
Restores proper tension to your dryer's lint screen door for smooth opening and closing. Replace if the cover is loose or won't stay closed securely.
Front bulkhead drum assembly for your dryer. Installs as the front section of the rotating drum. Replace if cracked, damaged, or worn from regular use.
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components. Proper installation is critical for the washer's stru
Secures the lint filter duct to the dryer blower housing. Replace if the clip is broken, cracked, or missing to properly hold the duct in place.
The Blower Belt is an OEM part for Whirlpool dryers. This belt drives the blower fan, which is essential for circulating air through the dryer drum and out the exhaust vent, ensuring efficient drying of clothes. The blower belt is designed to fit seaml
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.
Dryer shuts off before clothes are dry? The moisture sensor bar detects dryness levels. Easy 10-30 minute DIY fix with video guide included.
Secures the light bulb socket inside your dryer drum. Replace if the bracket is cracked, broken, or missing to properly mount the drum lighting assembly.
Dryer won't power on or has intermittent electrical issues? A worn terminal block socket causes loose connections. Simple DIY fix in under 30 minutes.
Fix slow drying or no airflow in your dryer by replacing a stripped or cracked blower wheel. Moderate DIY repair restores proper air circulation.
Replacement clip that secures trim, panels, or small components to restore proper fit and reduce rattling and vibration. Install when a worn or missing clip leaves trim or panels loose or causes intermittent noise. What it does:
Fix E1 error codes or overheating issues with this dryer thermistor. Monitors temperature to prevent shutdowns. DIY repair takes about 30 minutes.
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
This housing slot heater melts ice and prevents frost buildup inside the appliance housing, helping restore normal airflow and component operation. It's a direct replacement heater element used where ice forms around the housing slot. What it does:
Dryer won't heat? This thermal cut-off kit prevents overheating by interrupting power to the heating element. Common DIY fix with basic tools in 1 hour.
The Dryer Thermostat is an OEM part for Whirlpool dryers. It regulates the temperature inside the dryer, ensuring that it maintains the correct heat levels for safe and efficient drying cycles.
You should replace this dryer thermostat if it bec
The Thermal Fuse is an OEM part for Whirlpool dryers. It is a critical safety component designed to protect the dryer from overheating by blowing and cutting off power if the temperature exceeds safe limits. This disposable, one-time fuse is essential
Secures and covers your dryer's lint filter to trap debris effectively. Replace if warped, cracked, or allowing lint bypass. Verify fit by model number.
Replace your cracked or missing dryer drum baffle to restore proper tumbling action. This lifter bar attaches inside the drum to lift and separate clothes.
Front bulkhead assembly centers your dryer drum and mounts the bearing and seal. Replace if corroded, warped, or damaged to restore alignment and reduce noise.
Fix water leaks or no water flow to your dryer's steam system. This inlet valve hose assembly restores proper water delivery when the original hose fails.
This water inlet valve assembly controls water flow into the appliance so cycles fill correctly and water-dependent functions work reliably. It replaces a worn or failing valve to restore proper water supply. What it does:
Fix uneven steam distribution or wrinkles not smoothing out with this steam spray nozzle. Restores proper steam flow when clogged or cracked. DIY repair.
Replacement mounting nut for dryers. Secures panels, brackets, and assemblies. Replace if stripped, missing, or corroded during repairs or maintenance.
Flat metal washer that distributes load and secures fasteners in your dryer. Replace if worn, corroded, or missing to restore proper fastener grip.
Retainer clip secures interior panels and trim in your dryer, reducing vibration and rattling. Replace when panels feel loose or fasteners break.
This coupler connects the washer motor to the gearcase so the motor can turn the transmission and drive the washer's agitator and spin functions. Replacing a worn coupler restores reliable power transfer and normal wash cycles. What it does: