Parts for Lg WM3400CW/02: Cabinet & Control Panel Assy Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time. 

Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.

Symptoms of an insufficient hose retainer clip include:

• Loose, misrouted, or flopping hoses behind the control panel
• Bulging or kinked hoses that restrict water flow
• Water leaks at hose connections

This OEM replacement clip is compatible with select Kenmore front-loaders.

Fastens key washer components to maintain alignment during operation. Replace if stripped, rusted, or missing to restore stability and reduce vibration.

If your washer vibrates excessively or makes rattling noises, a loose or missing bolt assembly may be the cause. This fastener secures internal components.

This factory bolt assembly is a hardware fastener used to secure designated components within the appliance. Replacing a worn or missing bolt restores a tight, stable connection to help reduce vibration and noise while keeping parts properly aligned. What it does:

• Secures a component to its bracket, frame, or base
• Maintains alignment and stability of the assembly
• Helps minimize vibration and rattling when tightened correctly
• Common symptoms: missing or stripped bolt, loose connection, unusual vibration/noise, visible damage to the bolt head or threads

• Disconnect power and, if applicable, shut off water supply before servicing
• Support the component being fastened to prevent strain while removing/installing the bolt
• Start threads by hand to avoid cross-threading; tighten snugly per OEM guidance—do not overtighten
• Reinstall any washers, sleeves, or grommets in the original order if present

This top plate is the replacement interior top panel that protects microwave components and helps direct heat away from the cavity. A firm, exact-fit replacement restores safe operation and prevents food debris from reaching internal parts. What it does:

• Covers and shields internal microwave components from spills, splatters and food debris
• Helps maintain proper cavity surface for even cooking performance
• Replace if the top plate is dented, warped, corroded or has surface damage
• Prevents debris buildup that can cause odors, smoke or arcing when reheating food

• One top plate

• Disconnect power and unplug the appliance before servicing
• Handle edges carefully; metal panels may be sharp
• Verify part alignment and secure all fasteners; do not force-fit

Fix an unresponsive or blank washer display with this display power control board assembly. Powers and controls touch inputs and status indicators.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Direct replacement outer cabinet panel for your washer. Restores finished appearance and protects internal components. Replace if cracked, dented, or missing. Verify fit with your model number before ordering.

Secures washer tub during transport to protect suspension and internal components. Essential for moving your washer safely without damage to the drum system.

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Balance weight for front-load washers. Mounts to the drum assembly to stabilize spin cycles. Replace if cracked, broken, or detached from the tub.

Secures the washer door to the cabinet frame for smooth opening and closing. Replace if your bracket is cracked, bent, or broken to restore proper alignment.

Fix washer control issues with this multi-connector wire harness. Restores electrical connections between control board and components. Direct fit.

Front-loading washer door hinge assembly. Secures door opening and closing. Replace if door sags, won't stay closed, or hinge is cracked or damaged.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix washer control errors, intermittent power, or non-working components with this wiring harness. Restores reliable electrical connections and function.

Inner door frame for front-load washers. Structural component that supports the door glass and gasket. Replace if cracked, warped, or damaged from impact.

Fix a washer door that won't close or latch properly. This locker hook engages the lock mechanism to secure the door during cycles and prevent error codes.

Secures and positions internal washer components for quiet operation. Replace this mounting bracket if cracked, broken, or worn to restore alignment.

Fix no hot water, slow filling, or screaming noise during fill. This washer water inlet valve controls water flow into the tub. Moderate DIY repair.

Fix a washer that won't fill, fills slowly, or leaks at the water connection. This inlet valve controls water flow into the tub. Easy DIY repair.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

Washer won't spin or agitate? The stator assembly generates the electromagnetic field that powers drum rotation. Moderately difficult repair.

Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.

Control knob assembly for dryer and washer front panels. Replaces cracked, broken, or missing knobs. Restores smooth rotary control for cycle selection.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.

Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.

This is a plastic cover or case that fits over the drain pump filter area on a front-load washing machine. It provides access to the drain pump filter for cleaning while keeping the filter securely enclosed during operation. Replace this cover if it is cracked, broken, or no longer snaps into place properly, which can cause water leaks near the bottom front of the washer.

This is the complete detergent dispenser assembly that holds and releases detergent, bleach, and fabric softener at the appropriate times during the wash cycle. It includes the dispenser housing and internal components that direct water flow through the compartments. Replace this assembly if detergent is not dispensing properly, the dispenser is cracked or leaking, or residue builds up due to a clogged or damaged dispenser mechanism.

Replacement cover cap for washers. Conceals exposed screw heads and fastener holes for a clean finish. Install when original cap is cracked or missing.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Fix TE error code on your washer with this thermistor assembly. Monitors water temperature during wash cycles. DIY-friendly repair with video guide.

Connects household water supply to your washer inlet valve. Replace this hose if it's cracked, leaking, or worn to restore safe water flow during cycles.

Seals the temperature sensor where it passes through the washer tub. Replace if worn or leaking to prevent water damage. Confirm fit with your model.

Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.

Fix a washer that won't drain or makes grinding noises with this drain pump assembly. Includes pump, housing, filter, and drain hose for complete repair.

Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.

The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.

Symptoms of a bad holder include: 

• Loosening or detaching internal parts leading to noise and imbalance
• Cracking or damage of the plastic bracketry 
• Bearing or tub damage from improperly secured components

Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.

Replaces a damaged, melted, or scorched power cord assembly on your washer. Restores safe electrical connection when the original cord is burned or worn.

Directs wastewater from your washer to the drain. Replace if cracked, split, clogged, or leaking. Includes hose clamp. Confirm fit with your model.

Pivot hanger assembly that supports and stabilizes washer components. Replace if worn, damaged, or causing misalignment to restore smooth movement.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

Rubber gasket sealing washer door to prevent leaks. Replace if torn, cracked, or water leaks from door. Confirm fit with your model number.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.

Forms a flexible seal between tub and door on front-load washers to contain water. Replace if torn, moldy, or leaking to restore seal and eliminate odors.

Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.

The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.

Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.

Symptoms of a bad hinge pin include:

• Difficulty opening or closing the washer door
• Door not staying securely closed during operation
• Squeaking or grinding noises when the door is moved
• Visible wear or damage to the hinge pin

This OEM LG part is also compatible with Sears/Kenmore models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.