Craftsman Axle, Roller, Shaft, Wheel

The main drive shaft that the gearbox is attached to is called the drive shaft housing assembly. It connects the power source from the device to the top of the tool. The motor or engine's power runs through the drive mechanism to power the head to rotate while working. The metal piece is used to turn the gearbox in various types of lawn equipment, including blowers and trimmers from several different manufacturers. Signs that a replacement part is necessary may include poor performance or excessive vibration while in operation. Over time, the drive shaft will wear out from normal use or it can become damaged.The replacement of a drive shaft housing assembly is simple with the proper screwdriver and pliers. Replacement involves unscrewing the drive shaft housing from the throttle assembly. Remove the two screws holding the shaft in place. Screw in the new replacement part.The drive shaft housing assembly is supplied directly from the manufacturer and is a genuine OEM part. It is sold separately and individually. The replacement part can be used in MTD, Troy-Bilt, Bolens, and Yard Machines brand equipment. It is compatible with both blowers and trimmers. The piece is made from high-quality, durable materials.

This locking rod is a genuine MTD part, sold individually. This locking rod can be used as a replacement part in a log splitter. The purpose of a locking rod in a log splitter is to serve as a fastening component that holds one or more parts together.The locking rod in a log splitter might need to be replaced with this genuine OEM replacement part at some point within the typical lifespan of the appliance. This could occur if the locking rod is damaged in the form of puncturing, scraping, denting, cracking, eroding, or warping. If this occurs, the locking rod should be immediately replaced in accordance with the proper set of instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This locking rod is compatible with the following outdoor appliance brands: MTD, Yard Man, Ryobi, Cub Cadet, Craftsman, and Yard Machines.

When you are moving on uneven ground or simply turning, the gauge wheel is responsible for ensuring the machine doesn't hit the ground. It measures the distance between the surface and the deck. By doing so, the lawn tractor's deck is safe and sound on uneven surfaces. When it is deformed or broken, the tractor's deck is at a high risk of sustaining damage. A gauge wheel is broken if it doesn't touch the ground and doesn't wholly rotate. Replacing the gauge wheel is a straightforward procedure. First, turn off the tractor and take the key out. Use a socket and wrench to loosen the gauge wheel's bolt. Then, remove the old wheel. Insert the bolt and washer into the hole of the gauge wheel replacement. Then, attach the bolt to the mounting bracket. Use a socket wrench to secure. This gauge wheel from Husqvarna is specifically designed to fit and work with lawnmowers. This original Husqvarna replacement gauge wheel is for mower models from Poulan, Ariens, Craftsman, Dixon, and Husqvarna. It is sold individually and doesn't include a bolt and washer.

This part is a gauge wheel. A gauge wheel helps support the mower deck of lawnmowers and lawn tractors. The gauge wheel is also what allows the lawnmowers and lawn tractors to move.A new gauge wheel may be needed if the old one is physically broken or damaged in any way. The gauge wheel may need to be replaced after prolonged use due to build up of normal wear and tear. One of the most common ways that the gauge wheel is broken is when the lawnmower or lawn tractor runs over a small stump or concrete. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. The gauge wheel is compatible with lawnmowers and lawn tractors manufactured by Husqvarna, Rigid, Poulan, and Jonsered.

The curved drive shaft is a hollow piece that holds the drive cable, so that the engine can turn the cutting string. A curved drive shaft allows for more maneuverability and a lighter string trimmer. The curved shaft is also best suited for users who are shorter in height, or working in tight spaces that require more maneuverability. This product is made of durable plastic, but can become dry, worn or cracked over time. Replacement is needed when experiencing excess vibrations in the housing and handles, or excess spinning of the head occurs. If noticeable drying or cracking is observed on the part itself, go ahead and replace to maintain the functionality and safety of use. Replacement is simple, and may require a wrench, socket wrench or screwdriver; depending on type of trimmer. Remove trimmer head and guard by unscrewing the head from the shaft, and unscrewing the wing nuts that hold the guard in place. Using the socket wrench, loosen the locking nut at the top of the drive shaft, depress the alignment pin and remove the old drive shaft. Attach new shaft and reassemble. This part is compatible with Poulan trimmers and is an OEM part sourced directly from the manufacturer, and it is sold individually.