Craftsman Chainsaw Parts

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly.

This part fixes the following symptoms:

• Loose or wobbly components in the equipment
• Components not staying securely in place during operation
• Excessive vibration or rattling while using the equipment
• Difficulty in attaching or securing parts due to a damaged or worn-out bolt
   

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

The chainsaw thumb wheel assembly, sometimes called a wheel gear assembly or a chainsaw knob, is an important part of the chain adjustment system. Turning the wheel will allow users to tighten or loosen the chain on the saw. The thumb wheel assembly, made of plastic and metal, could become worn down or broken over time, which will require a replacement. If this part of the chainsaw is not working properly, it will not be possible to make adjustments to the chain's tension. Owners would not be able to remove their old chain or add a new one. The new thumb wheel assembly is easy to install and will get the chainsaw back in working order. The authentic OEM chainsaw thumb wheel assembly is sold individually. It is compatible with models from Husqvarna, Poulan, Poulan Pro, and Craftsman. Buyers should consult their manuals to ensure they are getting the correct part for their chainsaw's make and model.

The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.

This wire harness assembly is an authentic replacement for chainsaws. It is supplied from the manufacturer. The wire harness assembly connects to the ignition module. It is made of two wires. One of the wires carries the power from the coil to the switch, while the other wire attaches to the engine ground on one side and has a switch contact on the other side. The wires have a rubber insulated coating that helps to protect them from high heat. These wires can suffer damage in many ways. They could become frayed or cut, they could have been subject to extremely high temperatures, and more. When they are damaged, it can cause a continuity loss in the circuit which can shut off the saw. Owners should look for broken or frayed wires. They can also use a multimeter to check the wires for continuity. If there are issues, the wires should be replaced right away. The chainsaw wire harness assembly is a genuine OEM replacement part for use with chainsaws. The assembly is sold individually. It will work with select chainsaws from Craftsman, Husqvarna, Poulan, and Poulan Pro.

This chain brake is made to connect above the drum of a chainsaw. It has a metal band that goes around the drum and a handguard that also connects to the brake. When the guard is pressed forward, the brake band tightens on the clutch drum, making the chain stop immediately. The brake is pre-assembled and consists of both metal and plastic parts. The spring, brake band, and linkage are all metal, and the housing is plastic. A common chain brake problem is the brake band becoming worn out or damaged. This causes the brake to no longer stop the chain fast enough or at all. This can be incredibly dangerous, so it’s important to check the brake regularly. Installing a new chain brake is straightforward with this genuine OEM part sourced directly from the manufacturer. Just remove the clutch cover assembly, take off the old chain brake, and screw in the new kit. Be sure to wear gloves and let the engine cool completely before making repairs. Compatible with Craftsman, Poulan, and Poulan Pro chainsaws. Sold individually.

This is a complete set of gaskets designed as a set to make the most of chainsaw maintenance and repair. This OEM gasket kit contains seven unique gaskets that should be replaced whenever a chainsaw's motor is serviced or repaired. Gaskets are designed to ensure that fuel remains where it is intended within the engine and parts and does not leak or seep into other areas. The pressure is maintained in the machine through the use of effective gaskets and seals. This is a complete kit and comes with every gasket needed for chainsaws made by Craftsman, Husqvarna, Poulan, and McCulloch, among others. It does not come with any associated parts necessary for full chainsaw maintenance and will require disassembly of several systems to install the new gaskets.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

This is a replacement chainsaw bar adjustment pin that is a part of the clutch cover assembly. The pin connects to the adjustment screw and will fit into the hole on the bar. By turning the screw, it will turn the adjustment pin, which will loosen or tighten the chain on the bar. The bar adjustment pin is hearty, but it can become damaged through corrosion, wear and tear, and more. In addition, it could also be lost. Because the pin is essential, it is important to replace the pain when it shows signs of distress or when it is lost. When using the adjustment pin or adding a replacement, the owner mustn't overtighten the pin. This can cause damage to the pin, which would necessitate another replacement. This is a genuine OEM replacement pin that is sold individually for use on chainsaws. The pin is compatible with several brands including Craftsman, Husqvarna, Poulan, and Poulan Pro.