Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Washer Control Board

Best Seller
Crosley Washer Motor Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 134743500

Washer won't spin or shows communication error? The motor control board controls spin speed and motor functions. DIY repair in 30 minutes with video guide.

Do-It-Yourself Stories from Customers like You E5b error code on frigidaire gallery front load washer   Michael B. • Seattle , WA • October 26, 2015

This was the motor control board (also called the speed control board, motor control unit, or MCU in various places across the web). The repair was straightforward, except for two complications. First the old part was difficult to access in this model washer (Frigidaire Gallery Series front load washer). Instead of being easy to reach on the left side where there was space, it was sort of behind the actual motor on the right side of the housing. I spent some time trying to figure out... Read more

More
$175.95
Compare At:
$233.32
You Save:
$57.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Crosley Washer Timer
Genuine Frigidaire part
By: Frigidaire
Part Number: 131758600

Washer won't advance through cycles or stops mid-cycle? The timer controls wash, rinse, and spin sequences. DIY-friendly repair restores normal operation.

This part fixes the following symptoms
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The washer wouldn't advance to the next cycle   Alphonso C. • Axton , VA • January 03, 2017

I replaced the timer Read more

More
$216.66
Compare At:
$259.99
You Save:
$43.33

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Washer Timer Control
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546681

Washer won't advance cycles or stops mid-cycle? This timer sequences fill, wash, drain, and spin stages. Moderate DIY repair restores cycle control.

Do-It-Yourself Stories from Customers like You Wouldn't complete cycle, finish rinsing   David H. • Corpus Christie , TX • April 08, 2014

Watched instructional viedeos on how to replace timer. Read more

More
$179.23
Compare At:
$211.49
You Save:
$32.26

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Washer Electronic Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 137005000NH

Fix washer that won't start, flashes 9 lights with beeps, or skips normal cycle. This electronic control board restores proper operation. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You The washer would beep nine times wait 2 seconds and beep nine times continuously nothing i could do would stop it unplugging it several times did not help   Stephen B. • Flat Rock , MI • October 25, 2014

I replaced the control board. Read more

More
$180.33
Compare At:
$212.79
You Save:
$32.46

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Washer Electronic Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006085

Washer won't start, powers off mid-cycle, or shows error codes? The electronic control board manages all cycles and components. DIY repair in 30-45 minutes.

Do-It-Yourself Stories from Customers like You E43 error code washer was shutting off before spin cycle   Christopher H. • Richmoind , ME • April 22, 2017

About a year ago, the washer was doing a similar thing, where it would shut off before the spin cycle started. The coin trap was completely clogged then, so I checked it first this time. It was clear, so I took the drain pump out and checked that as well. Nothing seemed to be physically wrong with the machine, so I put it in diagnostic mode, which gave me error code 43 when I tried the spin cycle. This one of the codes for a bad control board. Replacing the board only took about 15 minutes.... Read more

More
$243.95
Compare At:
$290.30
You Save:
$46.35

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Dryer Moisture Sensor Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828

Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.

Do-It-Yourself Stories from Customers like You Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle   James L. • Brandywine , MD • December 06, 2014

Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20... Read more

More
$187.63
Compare At:
$213.76
You Save:
$26.13

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Washer Noise Filter (Rfi)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10367632

Washer won't start or trips breaker? This RFI noise filter conditions AC power and protects control circuits. Easy DIY fix with video guide included.

More
$55.24
Compare At:
$65.18
You Save:
$9.94

IN STOCK
Ships Monday Guaranteed
Add to Cart
Crosley Washer Control Board
Genuine Frigidaire part
By: Frigidaire
Part Number: 137208014NH

Washer won't start, shows error codes, or cycles incorrectly? The control board manages all wash cycles and safety functions. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You E53 error code   Susan R. • Beverly Hills , FL • March 03, 2017

After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water... Read more

More
$207.66
Compare At:
$247.12
You Save:
$39.46

IN STOCK
Ships Monday Guaranteed
Add to Cart

Accessing quality Crosley washer control board replacement parts is crucial for maintaining your washer's efficiency. The control board is an essential component managing various functions from wash cycles to spin and rinse actions, ensuring your laundry gets done smoothly.

Your Crosley washer is vital in your daily routine, and when its control board functions properly, it keeps all settings and cycles running seamlessly. This part acts as the brain of your washer, maintaining its reliability. Therefore, having the right Crosley washer replacement parts available is imperative for sustaining its performance.

Choosing OEM Crosley washer control board replacement parts is a smart decision. These parts, designed by the original manufacturers, ensure top quality and perfect compatibility with your washer model, unlike generic alternatives that might compromise performance.

Installing the correct Crosley washer control board replacements keeps your appliance running smoothly, preventing disruptions to your laundry routine. These parts are readily available and of excellent quality, making it simple to keep your washer in optimal condition.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store