Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Washer Belt

Best Seller
Crosley Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10006384

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

  • Links the drive motor to the washer’s drive/pulley system
  • Restores spin and agitation when the belt is worn, glazed, or broken
  • Can reduce squeal or burning-rubber smells from belt slip
  • Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

  • Unplug power; turn off water
  • Tip the washer back; remove the bottom shield/cover if present
  • Route the belt over the motor and drive pulleys; rotate by hand to seat fully
  • Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio washer made a loud noise during the spin cycles it also was very noisy while washing   Ralph N. • Spring , TX • October 25, 2018

This was my first attempt, ever, to repair a washing machine. After some internet research on the problems, I was able to determine that the shaft seal on the gearcase probably was leaking water into the gearcase with each use. No water was ever found on the floor, but when I turned the washer over to inspect the gearcase, I found a black, oily residue on the outside of it along with the same residue on the pulleys, the belt and the motor. I ordered a new gearcase, shift actuator, splutch... Read more

More
$28.26
Compare At:
$33.63
You Save:
$5.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21352320

The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.

Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.

Symptoms of a bad Washer Drive Belt include:

  • The washing machine failing to spin or agitate.
  • A burning smell or unusual noises during operation, indicating slippage or rubbing.
  • Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Spins slowly
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You The drive belt on my maytag washing machine was worn out   Donnie B. • Campobelly , SC • July 23, 2014

I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site. Thanks for the quick service and the video. Read more

More
$15.95
Compare At:
$23.33
You Save:
$7.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Washer Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134511600

The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.

Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.

Symptoms of a bad washer drive belt include:

  • The washer drum not spinning or agitating
  • A burning smell during operation
  • Unusual noises such as squealing or grinding
  • The washer stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$20.95
Compare At:
$24.93
You Save:
$3.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134719300

The Drive Belt is an OEM replacement part for Frigidaire dryers. It plays a crucial role in transferring the rotational motion from the dryer's motor to the drum, enabling the tumbling action necessary for drying clothes.

Symptoms of a need to replace the drive belt include:

  • The dryer drum not turning or rotating during cycles
  • Loud thumping or squeaking noises coming from the dryer
  • Visible wear, cracks, or fraying on the existing belt

Causes of a faulty drive belt can include general wear and tear over extended use, exposure to high temperatures or lint buildup, physical damage from foreign objects, or manufacturing defects in the belt material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models. 

Do-It-Yourself Stories from Customers like You Noisy electric dryer on startup   John B. • Wenatchee , WA • January 29, 2018

Disassembled dryer. Installed new belt, drum rollers, idler arm and blower. Read more

More
$53.72
Compare At:
$63.93
You Save:
$10.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239857

The Drive Belt is an OEM part for Whirlpool washing machines. This belt works to spin the washing machine tub and agitate clothes during cycles. It transmits rotational power from the motor to the inner tub and outer tub.

Causes of a bad drive belt can include wear and over time usage, exposure to harsh detergents or fabric softeners that may cause premature wear and cracking, or damage from overloading the washer.

Symptoms of a bad drive belt include:

  • The washer tub not spinning or rotating very slowly
  • Loud squealing, squeaking or grinding noises when operating
  • The belt slipping off the pulleys
  • Vibrating that causes the washer to walk or move during cycles

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Squeaking belt.   John N. • Piney Point , MD • September 24, 2020

After watching the repair video, wife challenged that the repair done before dinner. Finished in 20 minutes. Yes, before dinner. Read more

More
$44.95
Compare At:
$53.04
You Save:
$8.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Belt And Isolator Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001788

The Belt and Isolator Kit is an OEM part for Whirlpool washing machines. This kit includes a drive belt and isolators that work together to transfer motion from the motor to the washer drum while dampening vibrations. 

Over time, the belt can wear out, stretch, or break due to regular use, heavy loads, or friction. The isolators may also deteriorate, losing their ability to absorb shocks effectively.

Symptoms of a bad Belt and Isolator Kit include:

  • The drum not spinning or agitating
  • Excessive vibration or noise during operation
  • The washer failing to start or complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not agitate
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Noisy spin cycle   Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

More
$28.95
Compare At:
$34.45
You Save:
$5.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Drum Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051000

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

  • Dryer drum not turning
  • A loud thumping or squealing noise during operation
  • Dryer stopping mid-cycle
  • Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
See more...
Do-It-Yourself Stories from Customers like You Severe banging during spin cycle   Vince V. • Benson , AZ • March 03, 2019

With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more

More
$21.95
Compare At:
$30.17
You Save:
$8.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Drive Belt (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134616700

This washer drive belt links the motor to the drum pulley so the machine can tumble and spin. Replacing a broken or stretched belt restores smooth, reliable drum rotation during wash and spin cycles.

  • Transfers motor power to the drum for tumbling and spin
  • Worn or broken belts can cause no spin/tumble or intermittent rotation
  • Common symptoms: drum won't spin, squealing or thumping noises, burning rubber smell, visible fraying/cracks
  • Slipping belt can leave clothes wetter than normal at cycle end
What's included: 1 drive belt Install notes:
  • Disconnect power and turn off water supplies before servicing
  • Access the belt from the rear or bottom; remove panels as directed in your model's service information
  • Release belt tension at the motor/idler, remove the old belt, and route the new belt over the drum and motor pulleys with ribs properly seated
  • Rotate the drum by hand to verify alignment; reassemble and test. Inspect the idler/tensioner and pulleys while open

Do-It-Yourself Stories from Customers like You My KenmoreElite washer wasn't spinning at appropriate times during various cycles kept giving me the "srv cll" message on the display   Gregg S. • Georgetown , KY • October 02, 2019

Since I hadn't found the Tech Sheet for the washer (which there should be one inside the top cover) I simply thought I'd buy the drive motor (and a new belt, a.k.a "cheap insurance"). Installed the motor once I'd received it from AppliancePartsPros, the washer worked a couple of cycles then gave me the same "SrV CLL" message. I didn't know how to access the error codes on this model but found the info in the Tech Sheet, so I checked it and got an E53 code. Since I'd replaced the motor... Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003

The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.

Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.

Symptoms of a faulty Drive Belt include:

  • Loud squeaking or grinding noises during the wash cycle
  • The drum not spinning or rotating properly
  • Slipping or failure to agitate during wash cycles
  • Excessive vibrations or shaking from the washer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You No error codes; just lots of noise and movement   James S. • Winchester , TN • April 29, 2023

After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in... Read more

More

Crosley washer belt replacement parts are essential for keeping your laundry routine running smoothly. These components are designed to ensure that your Crosley washer operates efficiently, ensuring your laundry gets done on time and without interruption.

Washing machines are a household staple, and the parts that make them work, like the Crosley washer belt, are vital for their overall performance. These belts are responsible for transferring the motor's power to the drum, making sure it spins as it should. Without a properly functioning belt, your washer might not operate at its best, leaving your clothes less than clean. That's why it's important to have reliable Crosley washer parts on hand for those unexpected breakdowns or routine maintenance.

When it comes to replacement parts, opting for OEM Crosley washer belts ensures you're getting a product tailored to fit your machine perfectly. This not only makes installation simpler but also means your washer will continue to work as efficiently as the day you bought it. The quality and compatibility of OEM parts give you peace of mind, knowing you've made a choice that supports your appliance's longevity.

You can always count on the availability and quality of Crosley washer belts when you need them. Keeping your washer in top shape with the right parts means fewer headaches and more clean clothes, just the way you need it.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store