Crosley Washer Door, Door Glass & Parts

The Outer Door Panel is a genuine OEM part for Frigidaire washing machines. It is designed to protect the front of your washer door. It enhances the overall appearance of the washer and acts as a barrier to shield the internal parts of the door from damage. This helps to keep your washer running smoothly.

Causes of a faulty washer outer door panel can include normal wear and tear over time, accidental damage, or exposure to harsh conditions. Signs of a bad panel may include visible cracks, dents, or scratches that affect the functionality and appearance of your washer.

Symptoms of a bad Outer Door Panel include:

• Visible cracks, dents, or scratches on the panel
• Difficulty in opening or closing the door
• Loose or unstable door during operation
• Impaired insulation, leading to leaks or water spills

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Outer Door Panel is an OEM part for Frigidaire washing machines. This panel acts as the exterior surface of the washer door, providing both a protective barrier and an aesthetically pleasing finish. It is designed to fit seamlessly with the washing machine, maintaining its sleek look and ensuring the door operates smoothly.

You should replace this outer door panel if it becomes damaged or worn out. Causes of a bad outer door panel can include impacts that cause dents or scratches, exposure to moisture leading to rust or corrosion, and regular wear and tear that affects its appearance and function.

Symptoms of a bad outer door panel include:

• Visible dents or scratches on the panel
• Rust or corrosion spots
• The panel not aligning correctly with the door frame
• Issues with the door closing or sealing properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Inner Door Frame is an OEM part for Frigidaire front-load washing machines. It is located on the inner side of the washer door and provides support and stability to the door assembly. It helps secure the door components, such as the glass window and door seal and ensures proper alignment and functionality.

Causes of a faulty inner door frame can include wear and tear over time, physical damage, or misalignment. These factors can result in issues such as a loose or misaligned door, difficulty in closing or opening the door, or water leaks during the wash cycle.

Symptoms of a bad inner door frame may include:
• Loose or wobbly door
• Difficulty in closing or opening the washer door
• Water leakage during the wash cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Outer Door Panel is an OEM replacement part for Frigidaire washing machines. It serves as a protective barrier for the washing machine's door assembly, safeguarding the internal components and ensuring that the machine operates efficiently. The panel is designed to withstand regular use, providing durability and stability to the entire door assembly.

Causes of a bad Outer Door Panel can include physical impacts leading to dents or damage, wear over time affecting its structural integrity, or issues with the fittings that secure the panel in place. A damaged or compromised outer door panel can affect the machine's ability to operate effectively.

Symptoms of a malfunctioning Outer Door Panel include:

• Visible damage or warping of the panel
• Issues with the washing machine's door closing or sealing properly
• Unusual noises during operation due to a misaligned or damaged panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Inner Door Panel is an OEM replacement part for Frigidaire washing machines. This panel forms the inner structure of the washer door, providing a secure enclosure and supporting various components such as the door lock and handle. It plays a key role in ensuring the door seals properly to prevent water leakage during the wash cycle.

Causes of a bad inner door panel can include physical damage from impact or mishandling, warping or cracking due to age, or wear and tear from repeated use.

Symptoms of a bad Inner Door Panel include:

• Water leaking from the door during washing
• The door not closing or sealing properly
• Visible cracks or damage on the panel
• Difficulty in latching or locking the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Frame is an OEM part for Frigidaire washing machines. This part provides support and structure for the inner door components, ensuring a secure and tight seal during washing cycles to prevent leaks and maintain efficient operation.

Causes of a bad inner door frame can include wear and tear from regular use, physical damage from accidental impacts, or warping from exposure to high temperatures or moisture. 

Symptoms of a bad washer inner door frame include:

• Leaking water during wash cycles
• Difficulty closing or latching the door
• Visible cracks or warping on the frame
• Unusual noises during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This inner door frame forms the interior half of the appliance door. It holds the window and mounting points so the door aligns and latches correctly, replacing cracked or warped plastic that can affect closing performance.

• Forms the interior structure of the door and supports the window
• Provides mounting locations for hinge, strike/catch, screws, and trim
• Helps maintain proper door alignment and seal contact when closed
• Damage can cause misalignment, difficulty latching, rattling/loose window, or a door that won't stay shut

• Disconnect power; if servicing a washer, also turn off the water supply
• Remove the door, place it on a padded surface, and transfer the window and any door hardware to the new frame
• Reuse existing fasteners; tighten evenly and avoid overtightening into plastic
• Verify the door closes and latches smoothly before returning the appliance to service

Color: White. For bisque order WP22003279. For the outer door panel in white order 22003242. Used on Maytag Neptunes.

This replacement washer door window restores a clear view into the tub on compatible front-load models and helps the door seal correctly. Replace a cracked or cloudy pane to reduce leaks and keep operation safe. What it does:

• Provides the transparent viewing window in the washer door
• Works with the door boot/gasket to help form a watertight seal when closed
• Replace if the glass is cracked, chipped, shattered, or excessively scratched/cloudy
• Common symptoms include water leaking from the door area, poor sealing/door won't close, or visible damage to the window

• One door window glass

• Disconnect power and turn off water supply before servicing
• Wear cut-resistant gloves and eye protection; handle broken glass carefully
• Support or remove the door to a flat surface; separate door halves and transfer the window, noting orientation
• Clean the door boot sealing surface; seat the new glass evenly and reassemble without pinching the gasket; test for leaks

Plastic door cover

This replacement vent manages internal airflow within your appliance, routing air through the intended path. Restoring a damaged or missing vent helps maintain performance and reduces heat and moisture buildup inside the cabinet. What it does:

• Directs and regulates airflow through the appliance's air path
• Helps maintain proper pressure balance and efficient moisture removal
• Reduces the chance of lint or debris bypassing the intended ducting
• A cracked, warped, missing, or clogged vent can contribute to weak airflow, longer cycles, excess heat, or unusual noises

• 1 vent

• Disconnect power before servicing; allow hot components to cool
• Access the vent by removing the appropriate panel; note screw and clip locations
• Transfer any mounting hardware or seals from the old vent and ensure proper orientation
• Clear lint/debris from adjoining ducts before reassembly; test run to ensure smooth airflow and no rattling

This replacement door glass forms the clear window in the door of select front-load units, restoring safe visibility and proper door fit. Replace a cracked, chipped, or shattered pane to prevent leaks and ensure the door seals and latches correctly. What it does

• Creates the viewing window in the door and mates to the door gasket/boot
• Helps maintain a proper seal to contain wash action
• Restores safe operation when the original glass is damaged
• Common symptoms: visible cracks or shattering, water leaking from the door area, door not closing flush, rattling glass

• 1 door glass pane

• Disconnect power and turn off water supply before service
• Wear cut-resistant gloves and eye protection; handle glass carefully
• Remove the door, set it on a padded surface, and transfer trim/gasket as designed
• Tighten fasteners evenly and check gasket alignment to prevent leaks

NOTE: Door glass. Made out of Acrylic plastic. On some models, there is a triangular shaped notch that may have to be cut off in order for the glass to fit.

The Inner Door Glass is an OEM part for Whirlpool washing machines. As a key component providing visibility, the inner door glass allows users to monitor wash cycles without repeatedly opening the washer door. It is situated securely within the protective outer door paneling.

Causes of damaged inner door glass can include cracks or chips resulting from normal wear and tear, excessive impacts from clothing or coins, or improper cleaning techniques.

Symptoms of a bad inner door glass include:

• Reduced visibility into the washer during operation
• Leaks or moisture entering around the damaged glass
• Physical cracks, chips or debris visible on the glass pane
• Inability to securely latch or seal the washer door closed

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.