Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Washer Valve

Best Seller
Crosley Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165546

The Valve is an OEM part for Whirlpool washing machines. This component controls the flow of water into the washing machine during the fill cycle, ensuring that the proper amount of water enters the machine based on the selected settings. The valve is crucial for regulating water levels and maintaining the efficiency and effectiveness of the washing process.

You should replace the valve if it becomes faulty or malfunctions. Causes of a bad valve can include regular wear and tear from frequent use, mineral buildup from hard water, or damage from electrical issues or surges. These problems can lead to the valve not opening or closing properly, which affects the machine's ability to fill with water.

Symptoms of a bad valve include:

  • Washing machine not filling with water or filling slowly
  • Washer overfilling or water leaking from the machine
  • Inconsistent water levels during wash cycles
  • Strange noises during the fill cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The washer was not filling and displaying lf ("long fill") error code   Kalen D. • Valparaiso , IN • February 08, 2019

I removed the top of the washer, disconnected the existing inlet valve assembly, and replaced it with the part I bought from AppliancePartsPros.com. If it hadn't taken me 30 minutes to figure out how to remove the top of the washer (not the entire top, just the cover over the control panel area), this would have been a 5 minute repair. Read more

More
$66.30
Compare At:
$79.88
You Save:
$13.58

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: 285805

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of hot and cold water into the washer. This component is crucial for starting the wash cycle, as it opens to allow water to enter and closes to stop the flow once the appropriate level is reached, ensuring efficient wash performance.

Causes of a bad Water Inlet Valve can include mineral deposits and sediment build-up, which can obstruct the flow of water, or mechanical failure such as a broken solenoid that prevents the valve from opening or closing properly.

Symptoms of a bad Water Inlet Valve include:

  • Water not filling the tub at the beginning of the cycle
  • Water leaking from the valve
  • Washer not starting due to inability to fill
  • Unusual noises from the valve area during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
  • Fills and drains at the same time
See more...
Do-It-Yourself Stories from Customers like You Water would leak into the tub after a wash load was finished also the hot water valve would make a loud buzzing noise before it turned on the water   Robert B. • Robins , IA • January 23, 2015

I watched the how-to video on your website to learn how to get at the valve to replace it. Before watching the video, I did not know how to take the washer cabinet apart to replace the valve. I searched on your website for my washer model, but the exact model number was not listed. I chose a very similar model number and looked up the info for that machine's replacement valve . It looked like it would work in my washing machine so I decided to take a chance and order the valve. I placed my... Read more

More
$31.37
Compare At:
$37.64
You Save:
$6.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11210459

The Washer Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, opening and closing to allow the correct amount of hot and cold water into the machine during different stages of the wash cycle.

Causes of a bad water inlet valve can include wear and tear over time, sediment build-up, or damage from high water pressure. These issues can cause the valve to malfunction, leading to improper water levels or no water entering the machine at all.

Symptoms of a bad water inlet valve include:

  • Washer not filling with water
  • Slow fill or no water flow
  • Water leaking from the valve area
  • Inconsistent water temperature during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Lleaking hot water solenoid valve   David G. • Decatur , GA • August 13, 2018

Replaced solenoid valve assembly. Easy repair. Read more

More
$62.95
Compare At:
$79.88
You Save:
$16.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10683603

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, allowing it to fill with the correct amount of water during the wash and rinse cycles.

Over time, the water inlet valve can become clogged with debris, develop electrical issues, or wear out, leading to problems with the water flow. Causes of a bad water inlet valve include mineral buildup from hard water, internal component failure, or damage to the valve body.

Symptoms of a bad water inlet valve include:

  • The washing machine not filling with water
  • Slow or insufficient water flow into the washer
  • The washer filling with water when it should not
  • Unusual noises during the filling process
  • Leaks around the valve area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The cold water side of the water valve on the washer was leaking into the tub after the machine had shut down   Carlos P. • Okeechobee , FL • November 17, 2014

Ordered the valve body from Appliance Parts Pro. It was very easy to find the part on their website. Ordering was simple. The part actually got here the next day. I received an email about 2 hours after I received the part that contained the tracking number. That is what is known as quick and reliable service. Part was a little hard to replace since I have big hands. There are 2 metal screws that hold the valve body to the washer that are in a small confined area. Unless you want to dismantle... Read more

More
$68.36
Compare At:
$81.35
You Save:
$12.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Dispenser Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 134637810

The Water Dispenser Valve is an OEM part for Frigidaire washing machines. This valve controls the flow of water into the washing machine during the wash and rinse cycles. It ensures that the correct amount of water enters the drum, contributing to efficient and effective cleaning.

Causes of a bad water dispenser valve can include mineral deposits or debris clogging the valve, wear and tear over time, or electrical faults that affect the valve’s operation. 

Symptoms of a bad water dispenser valve include:

  • No water entering the washer
  • Insufficient water during cycles
  • Leaks around the valve area
  • Inconsistent water flow

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking water dispenser inlet valve on washing machine   Grete C. • Douglasville , GA • August 28, 2014

After tracing the water dripping back up through the inside of the washer I found the water dispenser inlet valve was leaking. I watched several videos to make sure I understood what was involved. I contacted a local parts company to get the part. I also searched online for the part. I found that AppliancePartsPros.com had it cheaper. I ordered late in the afternoon and it arrived the next day. It was fairly easy to installed and saved me a minimum of $99 "diagnostic" fee plus whatever the part... Read more

More
$119.47
Compare At:
$143.36
You Save:
$23.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11038689

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part ensures that the right amount of water enters the washing machine at the correct times, contributing to optimal washing conditions and efficient use of water.  

A failing Water Inlet Valve can be caused by mineral deposits from hard water, which can clog or restrict water flow, or by electrical failures that prevent the solenoids from operating correctly.  

Symptoms of a bad Water Inlet Valve include:

  • The washing machine not filling with water
  • Water filling too slowly or continuously
  • Water leaking inside the washer
  • Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking inlet valve.   Dale S. • Hominy , OK • January 06, 2023

Installed new Water Inlet Valve. Read more

More
$58.21
Compare At:
$69.27
You Save:
$11.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 134371220

The Water Inlet Valve is an OEM part for Frigidaire washing machines. This part controls the flow of hot and cold water into the washer's tub, ensuring the correct temperature mix for various wash cycles. By opening and closing at the command of the washer's control system, it plays a pivotal role in the machine's ability to execute programmed wash cycles with precision, affecting everything from the initial fill to the rinse phases. 

Causes for the replacement of the water inlet valve can range from mineral deposits and sediment build-up, which can obstruct the valve's flow, to mechanical wear and electrical failures affecting the valve's operation. 

Symptoms of a malfunctioning Water Inlet Valve include:

  • The washer not filling with water 
  • Water entering the machine slowly 
  • The washer filling with the wrong water temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You The mixing valve that the water hoses attach to had frozen and broken.   John M. • Commerce , TX • April 05, 2014

It was really easy to fix. I just took a screw driver and gently pried up on the top of the clothes washer to open up the top. Then the mixing valve was easy to access. I removed the two screws holding and unplugged the the wires. And pulled the old one free. Then reversed the process to install the old one. Less than thirty minutes start to finish. Read more

More
$54.26
Compare At:
$70.53
You Save:
$16.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11210463

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washing machine during the wash and rinse cycles. This valve ensures that the correct amount of water is delivered to the tub, enabling optimal washing performance and efficiency.

You should replace the water inlet valve if it becomes faulty or damaged. Common causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, wear and tear from regular use, or electrical issues affecting the valve's operation. A malfunctioning valve can lead to improper water levels and poor washing results.

Symptoms of a bad water inlet valve include:

  • Washing machine not filling with water
  • Washer filling slowly or with low water pressure
  • Leaks around the valve area
  • Washer not advancing to the wash or rinse cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You No cold water, down to a trickle no code screens clean good pressure from hose faulty valve   Terry P. • Freedom , PA • October 26, 2020

Replaced water inlet valve took all of 10 minutes and washer is filling great on hot and cold. Thanks to Appliance Parts Pros for getting me the part within 24 hours. I have a very happy customer. Read more

More
$89.95
Compare At:
$107.04
You Save:
$17.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W10599356

The water valve is an OEM replacement part for Whirlpool washing machines.

Causes can be mineral buildup blocking ports or seal deterioration over time/use. Wear of valve components reduces regulation capabilities.

Symptoms of a faulty valve may include:

  • Water not entering or draining properly
  • Inability to advance to certain stages
  • Error codes indicating water issues

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak   Frank G. • Old Forge , PA • April 13, 2020

Replaced water inlet unit. Read more

More
$104.62
Compare At:
$124.50
You Save:
$19.88

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134190200

The Water Inlet Valve Assembly is an OEM part for Frigidaire washing machines. This assembly controls the flow of water into the washing machine during the fill cycles, ensuring the correct amount of water enters the tub.

Over time, the water inlet valve can become faulty due to mineral buildup, wear and tear from frequent use, or damage to the valve components. If the valve is not functioning properly, it can result in issues with the water flow into your washing machine.

Symptoms of a bad water inlet valve assembly include:

  • No water entering the washing machine
  • The washer filling slowly or not at all
  • The washing machine filling with water when it is turned off
  • Leaks from the valve area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You The washer was filling very slow especially cold water.   Wayne S. • Oakland , MD • February 10, 2023

This is my third repair of this type. The first was a stand-alone washer and was very easy, because there was a plate on which the inlet valve assembly was mounted, and it was easily removed. This repair was on a Frigidaire stacked washer/dryer (laundry center). Stacked washer/dryers are typically purchased to save space and are often tucked into a closet. Be sure you can pull it out to access both front and rear. Remove drain hose from drain, detach water hoses, electricity and dryer vent... Read more

More
$100.95
Compare At:
$120.13
You Save:
$19.18

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Water Inlet Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001932

The Water Inlet Valve Assembly is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer during the fill cycles, ensuring the right amount of water is used for washing and rinsing. It plays a crucial role in the overall efficiency and functionality of the washing machine.

Common causes of a bad water inlet valve include sediment buildup, electrical failures, or damage to the valve components.

Symptoms of a bad water inlet valve assembly include:

  • The washer not filling with water or filling slowly
  • Water leaking from the valve area
  • The washer filling with water even when it's turned off
  • Error codes related to water intake issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Will not fill with water
  • No hot or cold water
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You Water overflow from washer   Arthur T. • Marshall , NC • June 09, 2014

I called Appliance pros and asked for a diagnosis. They gave one and sent me the part. It took 15 min. and it worked perfectly. Also got super fast delivery on the part. Thank you!! Read more

More
$103.95
Compare At:
$122.66
You Save:
$18.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Valve,Water ,115 V
Genuine Frigidaire part
By: Frigidaire
Part Number: 134211400

The Water Valve is an OEM part for Frigidaire laundry centers. It's a part that controls the flow of hot and cold water into the washing machine. By opening and closing at the appropriate times during the wash cycle, this valve ensures that clothes are washed in the correct temperature settings, optimizing cleaning performance and fabric care. 

Causes of a faulty Water Valve include mineral build-up from hard water blocking the openings, wear and tear causing leaks or malfunctions, and electrical problems such as faulty solenoids disrupting operation signals. 

Symptoms of a malfunctioning Water Valve include:

  • Water not entering the washing machine, leading to dry wash cycles.
  • Water entering the machine too slowly, indicating a partial blockage.
  • Water leaking from the valve when the machine is off, suggesting a failure to close completely.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms
  • Will not stop filling with water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water was leaking into tub when machine was off   Ronald H. • Tampa , FL • September 22, 2015

Part arrived in one day! Replaced the water valve. YouTube video for replacing water valve on Frigidaire top-loading washers was spot-on. Read more

More
$74.95
Compare At:
$89.94
You Save:
$14.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Crosley Thermistor, Water Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003834

For machine with 4 coil valve use part #WP22003245.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Leaking valve washer filled with water when not in use opened door of front loader and water flooded out   Roy B. • Santee , CA • September 01, 2014

Purchased replacement fill valve. Read more

More
$108.55
Compare At:
$130.26
You Save:
$21.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Vacuum Break (Water Inlet Anti-Siphon)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3347034

This vacuum break is the washer's water-inlet anti-siphon fitting. It maintains a required air gap so the tub fills properly without drawing used water back into the supply, helping prevent leaks and backflow issues.

  • Maintains an air gap at the inlet to prevent backflow/siphoning into household water lines
  • Helps ensure consistent, unobstructed water flow into the tub
  • Replaces a cracked, clogged, or leaking vacuum break at the fill area
  • Common symptoms include leaks from the rear/top during fill, visible cracks, or restricted/noisy fill
What's included: One vacuum break. Installation notes:
  • Unplug the appliance and shut off both water supplies before servicing
  • Access the fill/inlet area; note hose routing and part orientation
  • Remove hose clamps/hoses and the old vacuum break; install the new part and secure clamps
  • Restore water and power, then run a fill test and check carefully for leaks

Do-It-Yourself Stories from Customers like You Wife noticed water on the laundry room floor!   Richard L. • Phelps , NY • April 06, 2015

Removed cover from Whirlpool washer (~20 years old) and found water to be leaking from hose connection at Break Vac. Obviously the hose had to be replaced but the Break Vac looked corroded and partially plugged, too, possibly inhibiting water flow. While the cabinet was off I noticed the Suspension Spring was rusted off so I ordered 1 of those, too. Total of all parts was under $45 so looks like we won't be getting a newer, more efficient washer anytime soon. Everything arrived in 3 days and... Read more

More
$45.95
Compare At:
$54.68
You Save:
$8.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Water Inlet Valve (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134866600

This is the water inlet valve that controls the flow of household water into your washer during fill and rinse. Replacing a failing valve restores proper filling performance and helps stop unintended water entry when the machine is idle.

  • Opens and closes to allow the correct amount of water into the washer as commanded by the control
  • Failure can cause no fill, slow/long fill, or continuous filling/fill when off
  • Leaks from the valve body or hose connections indicate the valve should be replaced
  • Electrical coil failure may lead to intermittent or no operation
What's included: 1 water inlet valve assembly Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel or pan to catch residual water; label and disconnect hoses and wiring
  • Install the new valve; transfer any brackets or clips from the old part if needed
  • Restore water and power, then check all connections for leaks and run a test fill

Do-It-Yourself Stories from Customers like You Washing machine F8 E1 error code   Michael R. • Brooklyn , NY • June 02, 2018

The error code indicated the washer wasn't getting any water, although the basket was filling to an unusually high level. After checking the inlet hoses and their connections but without opening the top cover to see the actual water level pressure switch, I went ahead and ordered the part. After receiving the switch, I opened the cover and found the original switch had fallen off it's mounting (for who-knows how long ago) and was resting against the drum. Over time, the movement of the drum... Read more

More
$99.95
Compare At:
$118.94
You Save:
$18.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Crosley Mixing Valve Bracket (Washer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10356257

This mixing valve bracket secures the washer's water inlet valve to the cabinet, keeping the valve steady and properly aligned for hose connections. A correct-fit bracket helps reduce rattles and potential leaks caused by a loose valve.

  • Mounts and supports the water inlet/mixing valve on the rear panel
  • Maintains proper alignment for hot and cold supply connections
  • Helps reduce vibration and rattling noises during fill
  • Common signs it's needed: loose or dangling valve, misaligned hose connections, or leaks at the valve fittings
What's included: 1 bracket Install notes:
  • Disconnect power and turn off both water supplies; relieve pressure before removing hoses
  • Access the rear of the washer and remove fasteners securing the existing bracket/valve
  • Transfer the valve to the new bracket, reusing the original hardware
  • Reattach the bracket to the cabinet, reconnect hoses, restore power and water, then check for leaks

Do-It-Yourself Stories from Customers like You No cold water into washer   Jack F. • Altoona , PA • March 01, 2015

Replaced water inlet valve Read more

More
$90.40
Compare At:
$106.67
You Save:
$16.27

IN STOCK
Ships Today Guaranteed
Add to Cart

Crosley washer valve replacement parts are essential to keeping your washing machine running smoothly. The washer valve in your Crosley washing machine plays a crucial role in controlling the flow of water, which is the backbone of the appliance's operation. Without it, you'd be left with wet clothes and a lot of frustration.

These Crosley washer parts ensure that each wash cycle gets the precise amount of water it needs, leading to cleaner and more efficient laundry loads. It's not just any part; it's a critical component. And when it comes to replacing it, opting for OEM Crosley washer valve parts can make a world of difference. Original Equipment Manufacturer parts are designed specifically for Crosley washers, guaranteeing not just compatibility but also durability and performance.

Next time you're fixing up your washer, remember that you can count on the availability and quality of Crosley washer valve replacement parts to get the job done right. Rest easy knowing that these parts will help keep your appliance in tip-top shape, giving you one less thing to worry about.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store