Dishwasher Trim

The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.

Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes. 

Symptoms of a bad Tub Corner Baffle include:

• Visible signs of wear or damage
• Water leakage from the corners of the dishwasher door
• Unusual noises during operation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation.  For the left side use WD8X228. Color: Black.

Symptoms of a bad Tub Corner Baffle include:

• Water leaking from the corners of the dishwasher door.
• Pools of water forming near the dishwasher after operation.
• Decreased cleaning performance due to water escaping the wash cycle area.

Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cabinet Side Seals are an OEM part for Bosch dishwashers. These seals are located along the sides of the dishwasher cabinet and play a crucial role in preventing water leaks and maintaining an airtight seal during operation.

Causes of a bad seal can include general wear and tear over time, exposure to high temperatures or moisture, or damage from mishandling or improper installation.

Symptoms of a bad Cabinet Side Seal include:

• Water leaks or moisture buildup around the sides of the dishwasher
• Difficulty closing the dishwasher door properly
• Decreased efficiency in drying performance
• Potential for water damage to surrounding areas

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This frame assembly replaces a damaged or worn front cabinet frame to restore a secure fit and finished appearance. It provides a stable mounting surface for door components and helps maintain proper alignment. What it does:

• Replaces cracked, bent, or cosmetically damaged front frame pieces
• Restores proper fit and alignment for the door and trim
• Helps eliminate gaps that can trap debris or affect door operation
• Provides the original mounting points for associated trim and hardware

• One frame assembly

• Disconnect power and follow appliance-specific safety procedures before servicing
• Handle carefully to avoid scratching or damaging adjacent panels and trim
• Installation typically requires removing door/trim and fastening with existing screws or clips

Color: White. This is the right side trim strip. For left side use 00353048.

Color: Black. For white use 3374712. For almond use 3374713

This trim tub flange is the finished plastic ring that fits around the washer tub opening to restore appearance and help maintain a snug fit between the tub and the cabinet. It keeps the front of the tub looking clean and helps support the door seal area. What it does:

• Replaces worn or cracked tub trim to restore a clean, finished look
• Helps hold the tub edge trim in place so the door seal mates properly
• Reduces gaps where moisture or lint can collect around the tub opening
• Prevents rubbing or catching of the door boot or gasket on a damaged edge

• One trim tub flange

• Disconnect power and water supply before starting any repair
• Remove the washer cabinet or front panel as needed to access the tub flange
• Use basic hand tools; avoid prying on plastic parts to prevent damage
• Test fit before final reassembly and ensure gaskets/seals seat correctly

This tub trim flange is the replacement trim that snaps around the washer tub opening to cover the edge and restore the appliance's finished appearance. It helps maintain a proper seal and prevents fabric snags and water spray at the tub lip. What it does:

• Covers and protects the exposed tub edge for a clean, finished look
• Helps keep the door seal aligned and reduces risk of water spray from the tub opening
• Prevents clothing from catching on rough or damaged tub edges
• Replaces cracked, broken or warped trim that can cause cosmetic and sealing issues

• Disconnect power and turn off water supply before starting any repairs
• Remove the outer panel or door opening trim as needed to access the tub flange
• Carefully pry out the old trim and snap the new flange into place, ensuring even seating around the tub
• If you find additional damage to the seal or surround, inspect and replace those parts as needed

This trim tub flange restores the finished edge around the washer tub opening, covering the gap between the tub and door for a clean seal and smooth appearance. It helps prevent snags and keeps the cabinet opening protected. What it does:

• Covers and protects the tub opening edges, improving appearance and reducing fabric catch points
• Helps keep the door seal aligned and reduces airflow around the door opening
• Commonly replaced when the trim is cracked, warped, or missing, or when it no longer secures properly
• Fits onto the tub face and secures with factory fasteners or clips

• One trim tub flange

• Disconnect power and water before starting any repair
• Remove the door and any retaining screws or clips to access the trim; retain fasteners for reassembly
• Inspect the door boot/seal and surrounding components for wear while replacing the trim