Dishwasher Spray Arm & Related

The Lower Spray Arm is an OEM replacement part for Frigidaire dishwashers. It rotates within the lower dishrack, spraying water during cycles to thoroughly clean dishes. This arm measures approximately 16.00 x 3.10 x 3.10 Inches (L x W x H) NEED TO ORDER 5304518968 SUPPORT,SPRAY LOWER when ordering the lower spray arm

Causes of a bad lower spray arm include normal wear and tear over extended use. Clogs within the arm can also reduce water pressure.

Symptoms of issues with the lower spray arm are: 

• Inadequate cleaning performance, especially on lower rack dishes
• Reduced or uneven water coverage 
• Difficulty rotating or getting stuck

This OEM replacement part is compatible with Electrolux, Gibson, and Kenmore brand dishwashers too.

The Lower Spray Arm Assembly is an OEM replacement part compatible with GE dishwashers. This assembly consists of the tubular spray arm and attached brackets that secure it underneath the upper dish rack.

Causes of a bad lower spray arm assembly can include mineral buildup that clogs spray holes over time or cracks/breaks from daily rack loading.

Symptoms of a bad lower spray arm assembly include:

• Inadequate cleaning of lower rack dishes
• Dirty dishes or glasses underneath with noticeable hard water spots
• Rattling or clicking noises from the loose spray arm during cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.  

NOTE:  The Manufacture has updated the spray arm. The spary arm no longer has the metal ends on the tips  of the heat sheild is no longer required per the manufacture. 

This Dishwasher Lower Spray Arm with Heat Shield is an OEM replacement part designed for Frigidaire dishwashers. This component ensures water distribution throughout the dishwasher during cycles, reaching all dishes for a thorough clean. The added heat shield protects the spray arm from the high temperatures during drying cycles, prolonging its lifespan and maintaining its efficiency. 

Symptoms of a bad Frigidaire Spray Arm, Lower, with Heat Shield include:

• Dishes not being cleaned properly
• Water not being distributed evenly during cycles
• Noticeable damage or warping to the spray arm

Over time, the spray arm can become clogged with food particles or mineral deposits, or it can become damaged from normal wear and tear. A compromised spray arm can result in poor cleaning performance and inefficient water distribution.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Arm-Spray is an OEM part for Whirlpool dishwashers. This component is responsible for distributing water throughout the dishwasher during the cleaning cycles. It rotates and sprays water to ensure that all dishes are thoroughly cleaned, reaching all corners of the dishwasher.

Causes of a bad arm-spray can include clogging from food particles or mineral deposits, damage from heavy items or utensils blocking its path, or wear and tear from regular use.

Symptoms of a bad arm-spray include:

• Poor cleaning performance with food residue left on dishes
• The spray arm not rotating properly
• Unusual noises during the wash cycle
• Water not reaching the upper racks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Spray Arm is an OEM part for Frigidaire dishwashers. It is responsible for spraying water onto the dishes in the lower rack, ensuring they are thoroughly cleaned during the wash cycle.

Causes of a bad lower spray arm can include clogging from food particles or debris, damage from hard water buildup, or wear and tear from regular use. Additionally, physical damage or warping can occur if the dishwasher is overloaded or items block the spray arm's rotation.

Symptoms of a bad lower spray arm include:

• Poor cleaning performance on dishes in the lower rack
• Uneven water distribution
• Spray arm not spinning or moving properly
• Visible cracks or damage to the spray arm

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This support is a refrigerator mounting bracket that stabilizes internal components and keeps assemblies aligned for reliable operation. It replaces worn or broken supports to help reduce rattling and improper panel fit. What it does

• Secures and aligns internal cabinet or component panels to prevent shifting during normal use
• Helps maintain proper spacing for doors, panels, or internal assemblies
• Reduces vibration or rattling caused by loose or damaged supports
• Commonly replaced when a support is cracked, broken, or no longer holds mating parts securely

• High-level replacement: typically accessible from inside the cabinet or behind a trim panel; exact steps depend on model
• Use proper tools and retain all fasteners during removal for reinstallation
• Disconnect power before servicing any electrical components or removing panels near wiring

The Spray Arm is an OEM part for Bosch dishwashers. This component is responsible for distributing water throughout the dishwasher during a cycle, ensuring that dishes are evenly and effectively cleaned.The spray arm features multiple jets that optimize water flow and maximize cleaning efficiency.

Symptoms of a bad Spray Arm include:

• Poor cleaning results, with food particles or soap residue left on dishes.
• Water not spraying or distributing evenly inside the dishwasher.
• Visible cracks or blockages in the spray arm holes.
• The arm not rotating freely during cycles.

Causes of a bad spray arm can include hard water deposits clogging the jets, physical damage from loading large items, or general wear and tear affecting the arm's rotation mechanism.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Arm Spray is an OEM part for Whirlpool dishwashers. This component is crucial in the dishwasher's ability to effectively clean dishes, as it distributes water evenly throughout the unit during a wash cycle. Located beneath the upper rack, the arm spray rotates and sprays water at a controlled pressure and angle, ensuring that all dishes, regardless of their placement, are thoroughly washed.

Causes of a bad arm spray include clogging from food particles or mineral deposits from hard water, physical damage that can prevent it from spinning, and wear that reduces the effectiveness of the spray holes.

Symptoms of a bad arm spray include:

• Dishes remain dirty or spotty after washing
• Decreased water pressure in the spray
• Unusual noise during operation as the arm struggles to rotate

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spray Arm and Supply Tube Kit is an OEM replacement part for Whirlpool and KitchenAid dishwashers. This kit restores two key cleaning mechanisms by replacing lower spray arms as well as its feed tubes.  

This kit includes:

• An 18-inch upper spray arm
• A holder or hanger
• A single-piece water supply tube
• A split-ring seal
• A screw

Causes of failure can include mineral deposits clogging small jet openings plus years of constant high-pressure water exposure creating small fractures in rigid plastic arms.

Symptoms of a failed spray system include:

• Greasy or soiled dishes despite washing  
• Diminished water pressure observed inside the dishwasher
• Visible cracks or missing spray jets on arm vanes
• Leaks from worn tube connections to spray arms

This OEM replacement part is compatible with Maytag, Jenn-Air and Amana models as well.

The Spray Arm is an OEM part for Frigidaire dishwashers. This component is crucial for the cleaning process as it rotates and sprays water onto dishes to remove food particles and ensure thorough cleaning. Located typically at the bottom or middle of the dishwasher, the spray arm is designed to distribute water evenly across all items in the dishwasher.

Symptoms of a failing Spray Arm include:

- Dishes coming out dirty or with food residue after a wash cycle
- The spray arm not spinning or rotating during the wash cycle
- Low water pressure or uneven water distribution from the spray arm
- Visible cracks, clogs, or other damage to the spray arm

Causes of a bad spray arm can include blockages from food particles or mineral deposits, wear and tear from regular use, or physical damage from improper loading of the dishwasher or impact with dishes.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Upper Spray Arm is an OEM part for Frigidaire dishwashers. This component is crucial for the cleaning process as it rotates and sprays water onto dishes located in the upper rack, ensuring they are thoroughly washed and rinsed. The spray arm is designed to distribute water evenly, enhancing the dishwasher's efficiency and performance.

Symptoms of a failing Upper Spray Arm include:

• Dishes in the upper rack coming out dirty or not thoroughly cleaned
• The spray arm not rotating or spinning during the wash cycle
• Low water pressure or uneven water distribution from the spray arm
• Visible cracks, clogs, or damage to the spray arm

Causes of a bad spray arm can include blockages from food particles or mineral deposits, wear and tear from regular use, or physical damage from improper loading of the dishwasher.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Middle Spray Arm Assembly is an OEM component for GE dishwashers. It is responsible for dispersing water across dishes located in the mid-section of the dishwasher rack. 

The spray arm plays an essential role in cleaning by spraying water directly onto dishes to wash away soap scum and food particles. It works with the lower spray arm and rinse arms to achieve maximum coverage and cleaning power throughout the wash cycle.

Causes of a bad middle spray arm can include buildup of minerals or debris that clogs the spray holes or damage to the arm itself such as bending or breakage. 

Symptoms of a bad middle spray arm assembly include: 

• Spotty or incomplete cleaning of dishes in the mid-rack section
• Clogging or slowed water dispersal from the spray arm 
• Leaks or drips from the spray arm connection point

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore model dishwashers. 

The Spinner Kit is an OEM part for Whirlpool dishwashers. The spinners are responsible for spraying water to effectively clean and rinse dishes. Over time, spinners may wear out or break, impacting performance. If your dishwasher isn't cleaning properly, inspect the spinners first

Causes of a bad Spinner Kit can include mineral buildup from hard water, which may block the water jets, or physical damage to the spinner arms that can occur from loading large or improperly placed dishes.

Symptoms of a failing Spinner Kit include:

• Dishes remaining dirty or spotted after a wash cycle
• Water not spraying adequately throughout the dishwasher
• Unusual noise during the wash cycle as the damaged spinner struggles to rotate
• Decreased water pressure affecting overall appliance performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Spray Arm Mount is an OEM part for Whirlpool dishwashers. This component serves as a crucial connection point between the upper spray arm and the water supply tube within the dishwasher. The mount is designed to ensure the spray arm is securely attached and positioned correctly to distribute water evenly throughout the dishwasher during cycles.

Symptoms of a bad Upper Spray Arm Mount include:

• The spray arm becoming loose or falling off during operation.
• Inadequate water distribution leading to poorly cleaned dishes.
• Noticeable water leakage from the mount area during cycles.
• Visible wear or damage to the mount, such as cracks or breakage.

Causes of a bad upper spray arm mount can include mechanical stress from the rotation and water pressure, material fatigue over time, or damage from impact during loading and unloading of dishes.

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

PLEASE NOTE: Shaft is angled to match the bottom side of rack and mounts directly to the rack. On older design models part number WP8268812 will no longer be used.

The Spray Arm Bearing is an OEM replacement part for Whirlpool dishwashers. This supports the rotation of the spray arm, ensuring it can freely move and distribute water evenly throughout the dishwasher during a wash cycle.

Causes of damage to the spray arm bearing can include mineral buildup from hard water, wear and tear from regular use, or damage from debris that has become lodged in the spray arm. 

Symptoms of a bad Spray Arm Bearing include:

• The spray arm not rotating properly or getting stuck, which can lead to dishes not being cleaned effectively.
• Unusual noises coming from the dishwasher, such as grinding or squeaking, indicating that the spray arm is struggling to rotate.
• Poor water distribution inside the dishwasher, resulting in spots or food residue on dishes after a cycle.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Orbital Sprayer is an OEM part for Frigidaire dishwashers. It is a component of the dishwasher's spray arm system responsible for distributing water and detergent to effectively clean your dishes.

Causes of a malfunctioning orbital sprayer can include clogging due to food particles or debris, damage to the nozzles or spray arm, or a faulty connection. These factors can result in reduced cleaning efficiency, poor dishwashing results, or even a complete lack of water spray.

Symptoms of a faulty orbital sprayer may include:

• Dishes coming out dirty or poorly cleaned
• Visible blockage or damage to the sprayer
• Unusual noises during the wash cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.