Parts for Lg WM3700HVA: Dispenser Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Shipping bolt assembly secures the washer drum during transport. Replace if bolts are lost, damaged, or missing before moving your washer to prevent damage.

This is the outer rear tub assembly that includes the bearing for a front-load or top-load washing machine. It supports the inner drum and allows it to spin smoothly during wash and spin cycles. Replace this assembly if you hear loud rumbling or grinding noises during the spin cycle, notice water leaking from the rear of the tub, or the drum wobbles excessively.

Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

Top plate assembly for washers. Mounts on the upper cabinet frame to secure internal components. Replace if cracked, broken, or damaged during repair.

Fix a blank or unresponsive washer display with this control board. Restores cycle selection and settings control. Moderate DIY repair with basic tools.

Mounts inside the washer drum to lift and tumble clothes during the wash cycle. Replace if cracked, broken, or missing to restore proper agitation.

Spider arm assembly connects the wash basket to the drive shaft in front-load washers. Replace if cracked, corroded, or broken to restore drum support.

Machine screw that fastens brackets, panels, or housings in select washers. Replace when missing, stripped, or damaged to restore secure assembly fit.

The Bearing Ball is an OEM part for LG washing machines. This component plays a crucial role in the smooth operation of the washer drum, enabling it to rotate quietly and efficiently during the wash and spin cycles.

Causes of a bad bearing ball can include regular wear and tear, exposure to heavy loads, or insufficient lubrication. Over time, these factors can lead to deterioration and reduced performance of the bearing ball, potentially causing the washer drum to spin improperly or not at all.

Symptoms of a bad bearing ball include:

• Loud rumbling or grinding noises during the wash or spin cycles
• The drum not spinning or spinning unevenly
• Increased vibration or movement of the washer
• Leaks from the drum area due to damaged seals

This OEM LG part is also compatible with Sears/Kenmore models.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Seals the rear tub to prevent water leaks during wash and spin cycles. Replace if you notice leaking or bearing noise. Confirm fit with your model.

Replace a cracked or broken washer balance weight. This concrete counterweight attaches to the drum to stabilize during spin cycles. Order now.

Replace your washer's outer cabinet cover panel. Restores appearance when the original is cracked, dented, or damaged. Covers and protects internal components.

This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.

• Secures panels, brackets, and mounting points as specified by the manufacturer
• Replaces screws that are lost, damaged, corroded, or stripped
• Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
• Maintains proper alignment and stability of the assembly

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to its original location; start threads by hand to avoid cross-threading
• Use the correct driver; tighten snugly without over-torquing into metal or plastic
• Refer to your model's parts diagram to correct location and quantity

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Fix excessive vibration and loud spinning with this washer balance weight. Stabilizes the tub assembly to reduce shaking and noise during spin cycles.

This hinge bracket secures the appliance door hinge to the cabinet, restoring correct door alignment and reliable opening/closing. Replace a cracked or bent bracket to stop door sag, rubbing, or uneven sealing. What it does

• Secures the hinge assembly to the cabinet frame so the door mounts firmly and stays aligned.
• Prevents door sag and misalignment that can cause sticking, rubbing, or poor door sealing.
• Restores proper pivoting action for smooth opening and closing.
• Helps maintain correct door position to avoid stress on hinges and surrounding trim.

• Disconnect power to the appliance before starting and remove any items from the door.
• Support the door while removing and installing the bracket to prevent it from dropping.
• Use the correct screwdriver or socket; tighten fasteners snugly but avoid over-torquing.
• If the hinge or mounting hardware is damaged or excessively worn, replace those parts as well for a secure repair.

Replacement tub cover for your washer. This plastic cover installs on top of the outer tub assembly. Order a new one if yours is cracked or broken.

Fix intermittent power issues, unresponsive controls, or component failures with this multi wiring harness. Restores electrical connections in washers.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

Seals between front and rear outer tubs to prevent water leaks during wash cycles. Replace if you notice leaking or during bearing replacement. Confirm fit with your model number.

This is a replacement screw used to secure internal components and assemblies. It restores proper fastening when original screws are stripped, loose, or missing. What it does

• Secures panels, brackets, or small assemblies to prevent rattling and misalignment
• Restores proper fit when original fasteners are worn, stripped, or lost
• Helps stop vibration-related noise from loose parts
• Matches OEM fastening locations and thread style for intended application

• Screw as shown

• Unplug the appliance or disconnect power before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack plastic
• Keep small parts away from children and dispose of damaged fasteners

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix washer control errors, intermittent power, or non-working components with this wiring harness. Restores reliable electrical connections and function.

Complete washer door assembly restores proper sealing and appearance. Replace when damaged, dented, or cracked. Confirm fit with your model number.

Restores the exterior trim and support around your washer door. Replaces the original frame when cracked, bent, or cosmetically worn. 1-piece design.

This outer door frame is the exterior trim piece that restores the front appearance and structural edge of a refrigerator door. It replaces a cracked, dented, or damaged outer frame to help the door close and look like new. What it does:

• Provides the visible outer trim and edge support for the refrigerator door
• Restores proper alignment and sealing surface when frame damage prevents a flush close
• Replaces cracked, bent, or cosmetically damaged door framing
• Helps maintain the door's finished appearance and protects internal components at the door edge

• Disconnect power to the appliance before starting any repair
• Removal usually requires opening the door, removing the inner door panel and/or handle fasteners; retain all screws
• Use care to avoid scratching the door finish; plastic trim clips can break if forced

This replacement refrigerator door handle provides a clean, secure grip for opening and closing the door and restores the appliance's appearance and function after a broken or worn handle. What it does:

• Replaces a damaged or cracked refrigerator door handle so the door can be opened and closed easily and safely
• Restores the appliance's original look when the original handle is scratched, loose, or missing
• Provides a secure grip to help prevent slips or dropped items when accessing the fridge
• Matches OEM fit and mounting points for a straightforward replacement when the part number is correct

• Disconnect power to the appliance or unplug it before starting work for safety
• Installation commonly requires removing trim or end caps and securing the handle with screws or clips; keep original hardware if it's undamaged
• Use appropriate hand tools and take care not to overtighten fasteners to avoid cracking the handle

Washer door won't close or latch securely? This door strike ensures proper door closure for safe operation. Easy DIY fix for common latch issues.

Secures and positions internal washer components to maintain alignment. Replace this retainer if cracked, broken, or worn to restore proper fit and stop rattling.

Washer won't fill or water keeps running? This inlet valve assembly controls water flow into your washer tub. Common fix for fill issues.

The Hot Water Valve is an OEM part for LG washing machines. It regulates the flow of hot water into the wash tub during the appropriate cycles. The valve allows hot water to enter the wash tub to help wash clothes thoroughly and effectively at warmer temperatures.

Causes of a bad hot water valve include mineral or lime buildup inhibiting proper operation, worn internal components due to age and use, or damage from freezing during winter months.

Symptoms of a bad hot water valve include:

• Only cold water entering the wash tub, even on hot cycles
• Fluctuating hot water temperature during cycles
• Leaks from the hot water valve area
• Inability to select hot water temperature settings

This LG part is also compatible with some Kenmore models.

This kit includes the bushing components that fit into the door hinge assembly on a front-load washer. The bushings reduce friction and allow the door to pivot smoothly when opening and closing. Replace this kit if the washer door feels loose, sags, makes grinding or squeaking noises, or no longer aligns properly with the door latch.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

A replacement lower housing that restores the appliance's base support and alignment. Replaces a damaged or cracked cabinet base to help reduce instability and provide a secure mounting surface for internal components. What it does:

• Provides the lower structural support for the appliance cabinet and internal assemblies
• Restores proper alignment of outer panels and access openings
• Helps reduce excessive vibration or instability caused by a broken or warped base
• Keeps internal components mounted securely to prevent rubbing or misalignment

• One cabinet base assembly

• Disconnect power and water before beginning any service
• Remove outer cabinet and support the drum/tub before removing the old base
• Handle sharp sheet-metal edges and mounting hardware carefully

Fix LE error code or washer won't spin issues with this stator assembly. Common repair for motor lock problems. DIY-friendly, typically installed in 30 minutes.

Replaces a cracked, broken, stripped, or missing control knob on your dryer or washer. Restores secure grip and proper engagement with the control shaft.

Replace a broken, rusted, or missing leveling leg assembly. Installs at the base to stabilize your washer, reduce vibration, and adjust height.

Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.

Washer case housing component. Replaces cracked, damaged, or missing case parts. Essential structural element for proper appliance assembly.

This is the dispenser drawer housing assembly for a front-load or top-load washing machine. It holds the detergent, bleach, and fabric softener compartments and directs water through them during the wash cycle. Replace this assembly if the dispenser drawer is cracked, leaking, or if detergent and additives are not being properly dispensed into the drum.

Washer cover cap installs on the exterior panel to conceal screws or openings. Replace if cracked, broken, missing, or damaged for a clean finish.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

Includes sensor probe

Replace your washer's water inlet hose if cracked, kinked, or leaking. This hose connects your water supply to the washer inlet valve for proper fill.

Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

Fix a washer that won't power on with a new power cord assembly. This 3-prong cord connects your washer to household electricity. Easy DIY repair.

The Pump Hose is an OEM replacement part for LG washing machines. It is a flexible tube that connects the pump assembly to the internal tub and spins through the detergent dispenser area. The pump hose is responsible for circulating and removing water during the wash and rinse cycles. 

Symptoms of a bad pump hose include:

• Leaks or water not fully draining from the washer 
• Slow or inefficient filling and draining of water  
• Pump running loudly or continuously
• Wet areas under or around the washer

Causes of failure can be cracks or splits developing in the tubing from repeated bending and flexing over time, or blockages restricting water flow.

It is also compatible with some Kenmore models.

Pivot hanger assembly for washers. Mounts inside the cabinet to support the tub suspension system. Replace if cracked, broken, or worn to restore stability.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

Fix a washer that won't start, stops mid-cycle, or shows error codes with a new main control board. This power board assembly restores all functions.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.

Door boot seal creates a watertight barrier between drum and door. Replace when leaking, torn, or moldy. Verify fit with your model number before ordering.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Replacement tub to pump hose for washers. Transports water from the wash tub to the drain pump. Replace if cracked, split, leaking, or damaged from wear.

Secures the door boot gasket in its groove to maintain a watertight seal. Replace if stretched, bent, or broken to stop front-panel leaks. Verify fit.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

This inlet hose routes household water into the appliance's fill system, providing a secure, watertight connection. Replacing a worn, cracked, or leaking hose restores proper fill and helps prevent leaks and cycle interruptions.

• Directs incoming water from the supply connection to the appliance's inlet/fill assembly
• Maintains a sealed path to prevent drips and leaks
• Replace if the hose is cracked, swollen, kinked, or fittings are corroded
• Typical symptoms include leaks behind/under the unit, slow or no fill, or a water supply error message

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure
• Note routing and fitting orientation; transfer any seals/clips from the original if required
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening, then restore water and check for leaks

If your washer leaks during fill or has low water pressure, this water inlet connector hose restores secure water flow. Direct replacement part.

Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.

Locking pin for shock absorber.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.