Parts for Kenmore 106.58986801 (10658986801, 106 58986801): Dispenser Front Parts

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit

Loose or non-functioning water dispenser? This retainer secures the lever and restores spring-loaded action. Simple 5-10 minute DIY repair with video.

For the complete ice door kit order W10823377.

Ice dispenser won't close or dispenses continuously? This dispenser door pin kit restores proper flapper operation. Easy DIY repair with video guide.

The Ice Dispenser Chute Door is an OEM part for Whirlpool refrigerators. This component is located in the ice dispenser mechanism on the freezer door and is responsible for opening and closing the ice chute. The chute door helps to dispense ice properly and prevents warm air from entering the freezer compartment, which can lead to frost buildup and inefficient cooling.

Symptoms of a failing Ice Dispenser Chute Door include:

• Ice not dispensing properly or getting stuck in the chute
• Frost or ice buildup around the ice dispenser area
•  Warm air entering the freezer, causing temperature fluctuations
• The dispenser door not opening or closing correctly, leading to gaps

Causes of a bad ice dispenser chute door can include wear and tear from regular use, damage from ice jams or blockages, and degradation of the door’s sealing mechanism over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

Note: This part longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door and the mounting tabs are broken, you can use the broken tab ice door kit 8201756.

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

Discolored or stained dispenser grille? This overflow grille prevents water from leaking into the door liner. Easy 30-second snap-in installation.

Grille sits below the water and ice dispenser on your refrigerator door to catch spills. Replace if cracked, stained, or damaged. Snaps into place.

Catches spills from water and ice dispenser. Replace if stained, cracked, or broken. Installs in front dispenser area. Snaps in without tools.

Catches spills from water and ice dispenser. Replace if stained, cracked, or broken. Installs in front dispenser area. Snaps in without tools.

Replaces the water tube that runs through your refrigerator door to the dispenser. Needed when the original tube is cracked, broken, or leaking.

This lever activates ice dispensing when pressed and is located inside the refrigerator door's dispenser opening. Replace it if ice doesn't dispense when pressed, the lever is stuck, broken, or fails to return to its normal position.

Replace your refrigerator's ice dispenser lever if it's cracked, broken, or missing. This paddle actuates ice dispensing from behind the door cover.

White ice dispenser lever for side-by-side refrigerators. Replaces discolored, cracked, or broken levers on the exterior dispenser panel.

Ice dispenser not working? This refrigerator ice lever activates ice release when pressed. Common fix for broken or worn levers. DIY-friendly repair.

Guides ice from the bucket through the dispenser chute. Replace if cracked, broken, or missing to prevent ice jams and ensure smooth dispensing.

Replace your refrigerator's dim or flickering LED light assembly to restore bright interior illumination. Easy DIY fix. Confirm fit with your model number.

Fix a refrigerator water or ice dispenser that won't activate or keeps running continuously. This micro switch controls dispenser operation. DIY-friendly.

This is the dispenser lever arm used to activate the water dispenser on the refrigerator door. It is biscuit (off-white) in color and is pressed by a glass or cup to trigger water flow. Replace this lever if it is cracked, broken, or no longer springs back into position, which can prevent the dispenser from operating properly.

This water dispenser lever activates the water flow when pressed, allowing you to fill glasses and containers from your refrigerator's water dispenser. It provides mechanical activation of the water valve when pushed against. Replace this lever if water doesn't dispense when pressed, the lever sticks, or it's cracked or broken.

The refrigerator water dispenser lever arm activates water flow when pressed and returns to position when released. Replace when the lever becomes stuck, breaks off, or fails to properly activate the water dispensing mechanism.

Replaces cracked, broken, or discolored water dispenser lever on side-by-side refrigerators. Installs behind dispenser faceplate. White finish.

Dispenser not responding or buttons not working? This front cover protects the touchpad assembly on side-by-side models. Restores control functionality.

Fix a cracked or damaged dispenser front panel. This cover restores your refrigerator's clean appearance and protects internal components. 145 chars.

The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.  

Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.

Symptoms of a bad strain relief include:

• Cracks, splits, or tears in the relieving plastic material  
• Dispenser arm separation from the cabinet opening
• Missing pieces that compromised structural integrity 
• Difficulty accessing or using the refrigerator's water/ice functions

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models. 

Fix water dispenser leaks or kinks in your refrigerator's water line. This bracket secures the water tube to prevent damage and maintain proper flow.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

6 - 19 x .250