Parts for Whirlpool ED2FHEXVT01: 08 - Dispenser Front Parts

Reduces contaminants for cleaner, better-tasting water and ice. Replace every 6 months or when indicator light activates. Verify fit by model number.

Secures cooktop panels, burner components, and trim pieces. Replace missing, stripped, or damaged screws to eliminate rattles and keep parts aligned.

Loose or non-functioning water dispenser? This retainer secures the lever and restores spring-loaded action. Simple 5-10 minute DIY repair with video.

Holds the ice dispenser chute door closed on your refrigerator. Replace if spring is broken, missing, or worn and the flapper won't seal properly.

Ice dispenser won't close or dispenses continuously? This dispenser door pin kit restores proper flapper operation. Easy DIY repair with video guide.

Replaces a cracked, broken, or worn ice dispenser chute door on your refrigerator. Installs in the freezer door ice dispenser to control ice flow.

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

Color: biscuit. It measures about 9 inches wide by 2-1/2 inches deep.

White overflow grille for refrigerator water/ice dispenser. Replaces cracked, pitted, discolored, or missing grilles. Snaps into place below dispenser.

Black plastic grille that catches water overflow below the dispenser on side-by-side refrigerators. Replaces cracked, stained, or missing grilles.

Replaces the water tube that runs through your refrigerator door to the dispenser. Needed when the original tube is cracked, broken, or leaking.

Replaces a broken or worn dispenser actuator arm on your side-by-side refrigerator. Restores proper lever function for water and ice dispensing.

White ice dispenser lever for side-by-side refrigerators. Replaces discolored, cracked, or broken levers on the exterior dispenser panel.

Ice dispenser not working? This refrigerator ice lever activates ice release when pressed. Common fix for broken or worn levers. DIY-friendly repair.

Guides ice from the bucket through the dispenser chute. Replace if cracked, broken, or missing to prevent ice jams and ensure smooth dispensing.

Ice dispenser not lighting up or bulb won't stay in? This refrigerator light socket restores secure bulb connection. Easy 30-minute DIY repair with video.

Fix a refrigerator water or ice dispenser that won't activate or keeps running continuously. This micro switch controls dispenser operation. DIY-friendly.

Control bracket secures switches and components in your refrigerator door dispenser panel. Replace if cracked, broken, or switch pins are damaged.

Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.

Replacement dispenser actuator arm for refrigerator water and ice dispensers. Needed when the original arm is cracked, broken, or missing.

Fix a water dispenser that stopped working or won't activate. This dispenser lever replaces broken actuator assemblies. Moderate DIY repair.

Replaces cracked, broken, or discolored water dispenser lever on side-by-side refrigerators. Installs behind dispenser faceplate. White finish.

Fix a dispenser that won't respond or stopped dispensing water. This 6-position switch assembly restores electrical switching for reliable cycle selection.

Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.

Replace a non-responsive or cracked refrigerator dispenser touchpad. This control panel restores water and ice dispenser functionality. DIY-friendly repair.

Fix a loose or wobbly dispenser paddle with this strain relief. Cushions the dispenser arm connection to prevent wear. Easy 5-minute repair with video guide.

Fix water dispenser leaks or kinks in your refrigerator's water line. This bracket secures the water tube to prevent damage and maintain proper flow.

The Broken Tab Ice Door Kit is an OEM part for Whirlpool refrigerators. This kit includes all the necessary components to repair or replace the ice door chute, which is responsible for dispensing ice from the ice maker to the ice bucket or directly to the user. The ice door chute must seal properly to prevent warm air from entering the freezer compartment, which can lead to frost and ice buildup.

Symptoms of a failing or broken ice door chute include:

• Ice accumulating around the ice dispenser chute
• Frost buildup in the freezer compartment
• Warm air leaking into the freezer, causing temperature fluctuations
• The ice door not closing properly or becoming stuck
• Unusual noises from the ice dispenser area

Causes of a broken ice door chute can include regular wear and tear, physical damage from mishandling or excessive force, or deterioration of the sealing components over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore. 

This kit is used if the ice door mounting tabs are broken off of the dispenser wall. If your model number uses this ice door WP2180353 or this ice door kit W10823377 this kit can be used.