Dryer Gasket & Seal

The Seal is an OEM replacement part for Whirlpool dryers. It creates a tight seal between the dryer door and the drum, preventing heat and moisture from escaping during the drying process. It helps maintain the proper temperature inside the dryer, allowing your clothes to dry quickly and evenly.

Symptoms of a faulty door seal include:

• Heat escaping from around the dryer door
• Excessive moisture or lint buildup
• Extended drying times

A bad door seal can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as heat escaping from around the dryer door, excessive moisture or lint buildup, or clothes taking longer to dry than usual, it may be time to replace the door seal.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This glider is a replacement drawer support that helps guide and stabilize a sliding refrigerator or freezer drawer for smooth opening and closing. It restores proper alignment and prevents the drawer from sticking or falling out of its track. What it does:

• Guides the drawer along its track to ensure smooth, even movement
• Maintains drawer alignment to prevent binding or tipping
• Replaces worn or broken gliders that cause noisy or jerky operation
• Helps the drawer seat properly so it opens and closes without snagging

• One glider (single drawer support)

• Inspect the track and mating hardware for damage or debris before installing
• Typically snaps or slides into place—no special tools required for most installations
• Replace matching left/right pieces as needed for balanced operation
• For appliance safety, work with the drawer empty and follow OEM service precautions

This glider replaces a worn or broken drawer slide to restore smooth movement and proper alignment for refrigerator drawers. It helps the drawer open and close evenly so stored items stay secure and accessible. What it does

• Supports and guides the drawer as it slides in and out of the cabinet
• Replaces a cracked, worn, or missing glider that causes sticking or uneven travel
• Helps prevent drawer wobble and keeps the drawer aligned on its track
• Compatible with common refrigerator drawer assemblies that use a small plastic/nylon glider

• Basic hand tools may be needed; remove the drawer to access the glider mounting area
• Align the glider with the track and snap or fasten into place per the original hardware
• Inspect adjacent slides and tracks for wear and replace if damaged to ensure smooth operation
• Disconnect power and remove food from drawers before disassembly if working near electrical components

This 14-inch felt anti-leaking strip seals oven door edges to help reduce heat, vapors and grease from escaping the oven cavity. It restores a tighter seal for safer operation and more consistent cooking results. What it does:

• Replaces worn or compressed door felt that lets heat, smoke or odors escape
• Helps reduce heat loss and prevents grease/steam from reaching external gaps
• Can improve oven temperature consistency when the original felt is deteriorated
• Commonly used when you notice drafts, burning smells or visible gap around the door

• One 14" felt anti-leaking strip

• High-level task: open or remove oven door per manufacturer instructions to access felt channel
• Clean the mounting area of residue before installing to ensure a flat, secure fit
• Press the felt into the channel; trim to length only if specified by OEM instructions
• Follow all safety precautions: disconnect power and allow the oven to cool before service

The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer. 

Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.  

Symptoms of a bad Front Felt Glide Assembly include:

• Unusual noises during operation, such as squeaking or grinding
• The dryer drum may catch or hesitate during rotation
• Increased wear and tear on clothing due to the drum's rough movement
• The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Drum Slide is an OEM replacement part for GE clothes dryers. It supports the front of the dryer drum, allowing it to rotate smoothly and quietly. Made of durable materials, this component reduces friction as the drum spins, ensuring that the appliance operates with minimal noise and wear.

Causes for a malfunctioning Drum Slide can include wear and tear from the constant rotation of the drum, accumulation of lint or debris causing friction, or damage due to overloading the dryer may also disrupt slide movement quality over time.

Symptoms of a faulty drum slide include:

• Noisy or off-balance drying
• Excessive drying times from inadequate tumbling action
• Premature wear of bearings and drive components due to slide friction issues

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This upper drum felt is the replacement seal that cushions and guides the dryer drum for quieter operation and smoother rotation. It helps protect the drum edge and prevents clothes from catching where the drum meets the front bulkhead. What it does:

• Cushions the drum and reduces metal-on-metal rubbing that causes squeaks or grinding noises
• Keeps garments from getting caught between the drum and cabinet edge
• Helps maintain proper drum alignment for even rotation
• Limits lint and airflow loss at the drum front to support optimal drying performance

What's included: One upper drum felt seal Install notes:

• Disconnect power before servicing; for gas dryers also shut off the gas supply and disconnect the gas line per manufacturer instructions
• Remove the dryer front panel or bulkhead as required to access and replace the upper felt; keep track of fasteners and orientation
• Inspect the drum, drum rollers, glide, and lower felt while servicing and replace any worn parts to prevent premature wear of the new felt