Need Help?
Call or text
This is a replacement ex. valve spring retainer for use with snow blowers, lawnmowers, and log splitters. The function of a valve retainer is to fit on top of a valve spring and to keep it in place. This seal ensures that there is no oil leaking into the combustion chamber of the engine. Signs that the valve could be bad or going bad include misfiring, ticking sounds, and compression loss.The metal retainers are built to last, but they could fail over time. They could crack or break, which would affect the performance of the machine. This could eventually cause damage to the engine if it is not replaced.The ex. valve spring retainer This is compatible with a range of models of yard equipment from MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.
This replacement part is a push rod guide and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Push rods are commonly used in lawn mowers and are responsible for assisting the user in the steering of the appliance. This guide is placed in a certain spot to help move the push rod in certain directions. A new push rod guide might be needed if the current one is visibly damaged or missing. This part is small but very important and should be replaced if the current one is not working properly. If the push rod itself is not able to be placed in certain spots, the guide might be at fault. This should be a simple replacement and should only take a few minutes. This push rod is sold as a single part. This part is sourced directly from the manufacturer and is a genuine OEM replacement part.
An oil drain plug keeps the oil where it is supposed to be in the machine. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a snow blower, a chipper, a shredder, a lawn mower, and a log splitter. It is compatible with products by brands such as Cub Cadet, Troy-Bilt, and MTD.The oil drain plug part is crucial in preventing oil from leaking when it is not supposed to as well as clearing the path upon removal for any needed oil changes. It is removed when the oil needs to be drained. The replacement or repair process of the oil drain plug should be straightforward, though it may be helpful if the owner or operator uses a socket wrench to aid in the replacement process. The user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This oil drain plug is made out of threaded metal. This oil drain plug is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.
This carburetor repair kit is a genuine MTD part, sold individually. This carburetor repair kit can be used as a replacement part in a snowblower. This kit contains everything needed to repair or rebuild a snowblower's carburetor.Signs of a damaged carburetor could include an engine that hard starts, does not start, or results in black smoke pluming out of the exhaust tube. If this occurs, the carburetor repair kit should be ordered as soon as possible to assess and inspect the carburetor for potential damage.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This carburetor repair kit is compatible with the following outdoor appliance brands: MTD and Cub Cadet.
This part can be used to replace a worn or broken rear stud to securely attach the shroud and keep it in place.Engine shrouds are critical for ensuring that air is properly circulated around the engine to keep it cool. Without an engine shroud overheating can occur quickly and cause serious engine damage. This rear stud is intended to attach the back of the engine shroud and secure it in place. This starter/shroud rear stud is a genuine replacement part that has been sourced directly from the manufacturer. This replacement starter/shroud rear stud fits various different models of MTD, Cub Cadet, Husky,Troy-Bilt, and Yardman outdoor power equipment such as lawnmowers, log splitters, and trimmers. Please note this starter/shroud rear stud is sold individually.
This ignition coil assembly is a genuine MTD part, sold individually. This ignition coil assembly can be used as a replacement part for lawn mowers and string trimmers. This ignition coil assembly comes with all of the necessary components required to facilitate a complete replacement or a new installation of the part. The purpose of the ignition coil is to transmit the voltage from the battery of the appliance to ignite a spark in the spark plugs such that the engine can be powered on.If the ignition coil is not igniting the spark plugs and powering on the engine, it is likely that the component has suffered damage and will need to be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.
Governor springs are critical to maintaining the speed of outdoor power equipment such as lawn mowers. They are important for keeping speed steady regardless of how hard the engine is working. Governor springs sense changes in the workload of outdoor power equipment and adjust the throttle for the operator. For example, when mowing a lawn, long grass or steep areas can influence the engine load. Without a governor spring, the mower would not maintain a steady speed and the throttle would need to be manually adjusted.This governor spring is a genuine OEM part that has been sourced directly from the manufacturer. This replacement governor spring fits a number of different types of outdoor power equipment including lawnmowers, trimmers, and chipper shredders. It is suitable for various Cub Cadet, MTD, Craftsman, and Troy-Bilt models. Please note these governor springs are genuine manufacturer parts and are sold individually.
This is a cylinder head gasket that is located between the cylinder head and the engine block on many types of lawn and garden equipment. It is responsible for sealing the internal combustion process. It prevents oil and coolant from mixing together while each moves to the cylinder head from the engine block. If the cylinder head gasket is broken or damaged, it can cause fouled spark plugs, white smoke, milky white oil, leaking coolant, or an overheating engine.Gaskets can crack or wear out over time, which requires the parts to be replaced. Some of the tools needed to make the replacement include a gauge, socket driver, Torx screwdriver, nut driver, screwdriver, torque wrench, hex bit, and spark plug wrench. Make sure to wear work gloves and do the replacement with the tools on a flat surface.This cylinder head gasket is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The head gasket is designed for use with lawnmowers, string trimmers, tillers, edgers, log splitters, and wood chippers created by Cub Cadet, Craftsman, and MTD.