Parts for Hot Point HDA2000V35BB: 01 - Escutcheon & Door Assembly Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Finished front panel trim for dishwashers. Replaces cracked, chipped, or discolored panels to restore the front appearance of your appliance.

Color: Black

Color: White.

The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.

Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door. 

Symptoms of a bad Hinge Arm Link include:

• Difficulty opening or closing the dishwasher door 
• A door that won't stay closed or opens unexpectedly 
• Visible wear or damage to the hinge arm link, such as bending, breaking, or severe wear marks 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Finished access panel for dishwasher front. Replaces cracked, damaged, or missing panels. Covers lower front access area for clean appearance.

Covers the lower front service opening on your dishwasher. Replace if cracked, dented, scratched, or missing to restore a clean appearance.

White dishwasher access panel that covers the lower front. Replace if cracked, rusted, missing, or when converting your dishwasher to a different color.

Replacement 8-32 x 1/4 screw with HXP head for securing dishwasher panels, brackets, and assemblies. Replaces stripped, missing, or damaged screws.

Almond toe kick panel covers the dishwasher base opening beneath the door. Replaces rusted, cracked, or missing kickplates to restore appearance.

White lower front toe kick panel covers the dishwasher base opening. Replace your cracked, dented, corroded, or missing panel to restore a finished look.

Size: 10-16 ab.

Hex washer head screw secures panels, brackets, and internal components in dishwashers. Replace stripped, rusty, or missing fasteners to restore fit.

Right-hand hinge that secures and guides your dishwasher door for proper alignment and smooth opening. Replace if cracked, broken, or worn to restore stability.

Left side door hinge for dishwashers. Secures and guides the door for proper alignment and smooth operation. Replaces bent, broken, or worn hinges.

If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.

The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wi

Metal contact leaf for dishwasher switch assemblies. Replace if the original contact is bent, corroded, worn, or missing to restore proper circuit closure.

Protective heat shield that installs inside your dishwasher to guard internal wiring and components from heat and debris. Replace if cracked or missing.

Replaces the interior face of your dishwasher door. Ideal when the door liner is cracked, dented, melted, or visibly worn. Restores a clean surface.

Secure wire harnesses in your dishwasher with this harness clip. Replace if wires are loose or clip is broken. Verify fit with your model number.

Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.

If your dishes have spots or dry poorly, the rinse aid dispenser may be clogged or leaking. This tank assembly restores proper rinse aid delivery.

Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.

Cushions and seals the dishwasher door vent to route steam safely while protecting the control area. Replace if worn, moldy, or causing leaks.

Secures the rinse aid dispenser tank in your dishwasher. Replace if the tank is loose, rattles, or detaches during cycles. Verify fit with your model.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.

Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.

Size: 10-12 x 1/2 inch.

Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.

The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispens

Replacement spring for dishwasher detergent cup door assembly. Provides tension to keep cup door latched closed. Replace if broken, stretched, or lost.

Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.

Fix a dishwasher that won't advance through cycles or gets stuck mid-wash with this timer cam. Regulates wash cycle timing via internal camshaft design.

Detergent cup not opening during wash cycle? This actuator lever connects the timer to the dispenser lid. Moderate DIY repair, about 35 minutes.

This dishwasher timer controls the sequence and duration of each cycle step. Replacing a worn timer restores proper cycle advancement so the unit fills, washes, drains, and dries at the right time.

• Sequences the dishwasher through fill, wash, rinse, drain, and dry stages
• Advances the cycle at the correct intervals to complete each step
• Failure may cause cycles not to start, not to advance, or to stop mid-cycle
• Common symptoms include getting stuck in a cycle, running too long, or the control knob not advancing

• Disconnect power at the breaker before servicing
• Access the timer behind the control console; remove inner door/console screws as needed
• Photograph/label wiring and transfer wires to the new timer one at a time
• Mount securely, reassemble the console, restore power, and test a full cycle

This dishwasher timer controls the sequence and duration of each cycle step. Replacing a worn timer restores proper cycle advancement so the unit fills, washes, drains, and dries at the right time.

• Sequences the dishwasher through fill, wash, rinse, drain, and dry stages
• Advances the cycle at the correct intervals to complete each step
• Failure may cause cycles not to start, not to advance, or to stop mid-cycle
• Common symptoms include getting stuck in a cycle, running too long, or the control knob not advancing

• Disconnect power at the breaker before servicing
• Access the timer behind the control console; remove inner door/console screws as needed
• Photograph/label wiring and transfer wires to the new timer one at a time
• Mount securely, reassemble the console, restore power, and test a full cycle

Fix unresponsive dishwasher buttons with this push-to-make switch. Restores reliable control input when pressed buttons fail to register commands.

Replace your dishwasher's worn, cracked, or missing timer control knob. Restores secure grip and clear position settings for easy cycle selection.

Replace your dishwasher's worn, broken, or missing timer knob. Attaches to the timer shaft on the control panel to select and advance wash cycles.

Includes 12 terminals.

White plastic knob for dishwasher door latch handle. Replaces broken, cracked, or missing latch knobs. Slides onto latch assembly and secures with screw.

Black plastic knob that covers the dishwasher door latch handle. Replace if your knob is missing, cracked, or broken. Installs over the latch lever.

Includes 12 screws.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.