Hotpoint Dishwasher Parts
Genuine Ge part
By: Ge
Part Number: WD28X35779
Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.
What it does
- Holds cups, glasses, and bowls securely on the upper level
- Helps prevent items from tipping or falling through the rack
- Restores smooth slide-in/slide-out when rails and rollers are intact
- Replaces racks with broken, rusty, or missing tines
What’s included
One upper rack assembly.
Install notes
- Open the door, pull the rack to the stops, then release/remove end caps to slide the rack out
- Seat the new rack on the rails and reinstall end caps—do not force
- Transfer any clip-on accessories from the old rack if applicable
- Run a quick rinse cycle to confirm smooth travel
Do-It-Yourself Stories from Customers like You
Our dishwasher racks were rusted to the point of disintegrating from our well water which now has been fixed by a whole house ro system Craig H. • Northport , FL • April 16, 2019
We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy.
Read more
More
$69.46
- Compare At:
-
$77.18
- You Save:
-
$7.72
Genuine Ge part
By: Ge
Part Number: WD28X34744
Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.
What it does
- Holds plates, bowls, and cookware securely on the lower level
- Helps prevent items tipping or falling through broken tines
- Restores smooth slide-in/slide-out when rails and rollers are intact
- Replaces racks with rusted welds, missing sections, or warped frames
What’s included
One lower rack assembly.
Install notes
- Open the door, pull the rack to the stops, remove end caps, and slide the old rack out
- Seat the new rack on the rails and reinstall end caps—do not force
- Transfer any clip-on accessories or tine clips from the old rack if reusable
- Run a quick rinse to confirm smooth travel
Do-It-Yourself Stories from Customers like You
Our dishwasher racks were rusted to the point of disintegrating from our well water which now has been fixed by a whole house ro system Craig H. • Northport , FL • April 16, 2019
We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy.
Read more
More
$75.95
- Compare At:
-
$84.60
- You Save:
-
$8.65
Genuine Ge part
By: Ge
Part Number: WD08X21894
Seals the bottom of your dishwasher door to prevent water leaks during wash cycles. Replace if you notice pooling water on the floor. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Lower door gasket on GE dishwasher had deteriorated and come apart. Juan S. • Benton , LA • February 28, 2023
I went to your web sight. I entered the GE dishwasher model # and found the gasket was available. While looking up the needed gasket I happened to see an applicable how-to replace the gasket video and watched it. It was easy to follow and VERY helpful. As I watched, I wrote down the gasket replacement procedure step-by-step. I ordered the needed gasket and received it in 2 days (AMAZING). The replacement entailed disconnecting the water supply, the power supply and the discharge hose. I removed...
Read more
More
$32.64
- Compare At:
-
$38.84
- You Save:
-
$6.20
Genuine Ge part
By: Ge
Part Number: WD22X33499
Replacement lower spray arm assembly for dishwashers. Installs under the upper dish rack to distribute water during wash cycles. Needed when cracked or broken.
Note: Due to manufacturer changes, the spray arm no longer has the metal tips on the end of the spray arm. Per the manufacturer, it is no longer required.
Do-It-Yourself Stories from Customers like You
Lower spray arm got caught on heating element John A. • Schwenksville , PA • June 14, 2025
Purchased new lower spray arm. counterclockwise wise turn to remove and clockwise turn to replace
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Ge part
By: Ge
Part Number: WD08X23476
Seals dishwasher door perimeter to prevent water leaks during operation. Replace if you notice leaking from door sides or bottom. Easy 5-minute install.
Do-It-Yourself Stories from Customers like You
Ge dishwasher gdf520pgd2ww leak slow drip from door Kay S. • Madison , AL • July 03, 2016
I ordered door seal and bottom strip seal:
GASKET TUB PLASTIC Number: WD08X22094
GASKET BEACH PLASTIC: WD08X21894
I had done this once previously and removed the door. That was not too bad but trying to put the door back on the hinges by myself was a bit of work. This time I:
1) removed the 2 screws at the bottom of the door.
2) opened the door all the way
3) slowly pulled the door back on the hinges till I could pull out the bottom gasket
4) slid the new gasket back in place
5) pushed the...
Read more
More
$23.59
- Compare At:
-
$28.07
- You Save:
-
$4.48
Genuine Ge part
By: Ge
Part Number: WD8X228
The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.
Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes.
Symptoms of a bad Tub Corner Baffle include:
- Visible signs of wear or damage
- Water leakage from the corners of the dishwasher door
- Unusual noises during operation
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$17.95
- Compare At:
-
$24.06
- You Save:
-
$6.11
Genuine Ge part
By: Ge
Part Number: WD8X227
The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.
Symptoms of a bad Tub Corner Baffle include:
- Water leaking from the corners of the dishwasher door.
- Pools of water forming near the dishwasher after operation.
- Decreased cleaning performance due to water escaping the wash cycle area.
Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$24.68
- Compare At:
-
$29.62
- You Save:
-
$4.94
Genuine Ge part
By: Ge
Part Number: WD21X25468
Fix H2O error codes and water fill issues with this dishwasher pressure sensor. Monitors water level for proper fill cycles. DIY repair in about 1 hour.
Do-It-Yourself Stories from Customers like You
H2o error code Joe D. • Lockport , NY • August 07, 2025
Tried to fix with a non GE part, didn’t work. Your GE brand pressure sensor worked like a charm
Read more
More
$28.62
- Compare At:
-
$34.06
- You Save:
-
$5.44
Genuine Ge part
By: Ge
Part Number: WD15X10014
Dishwasher not filling with water or fills slowly? The water inlet valve controls water flow into your dishwasher. Simple DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Water leak under the dishwasher Eric S. • Concord Twp , OH • October 26, 2014
Pulled out the unit, found the inlet valve was leaking. Went on AppliancePartsPros.com and ordered a new valve. That was Saturday evening. Tuesday I got my part and installed it. Thanks for the fast delivery.
Read more
More
$39.22
- Compare At:
-
$46.67
- You Save:
-
$7.45
Genuine Ge part
By: Ge
Part Number: WD21X10268
The Solenoid and Bracket Assembly is an OEM replacement part for GE dishwashers. This component plays a role in controlling the flow of water during the dishwashing cycles, allowing for proper water distribution and efficient cleaning.
Symptoms that may indicate the need to replace the solenoid and bracket assembly include:
- Issues with water not filling or draining properly
- Inconsistent or incomplete water circulation during cycles
- Visible leaks or water damage around the solenoid area
Causes of a faulty solenoid and bracket assembly can include normal wear and tear over time, electrical malfunctions, mineral buildup or debris obstructing the solenoid, or physical damage to the component.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Dishwasher would not drain Larry H. • Navasota , TX • July 18, 2016
Replaced the solenoid and bracket assembly
Read more
More
$39.44
- Compare At:
-
$47.33
- You Save:
-
$7.89
Genuine Ge part
By: Ge
Part Number: WD08X10057
Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.
Do-It-Yourself Stories from Customers like You
Water and soap leaking from door of our old GE profile performance dishwasher Wayne T. • Haines City , FL • June 10, 2018
My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even...
Read more
More
$79.72
- Compare At:
-
$107.94
- You Save:
-
$28.22
Genuine Ge part
By: Ge
Part Number: WD12X10304
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Do-It-Yourself Stories from Customers like You
Water would not drain Paula M. • Crestview Hills , KY • November 14, 2014
Replaced the pump drain assembly
Read more
More
$15.95
- Compare At:
-
$24.73
- You Save:
-
$8.78
Genuine Ge part
By: Ge
Part Number: WD19X25461
If your dishwasher won't drain or has standing water, this drain pump removes water at the end of each cycle. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
H2o error code Joe D. • Lockport , NY • August 07, 2025
Tried to fix with a non GE part, didn’t work. Your GE brand pressure sensor worked like a charm
Read more
More
$44.48
- Compare At:
-
$52.93
- You Save:
-
$8.45
Genuine Ge part
By: Ge
Part Number: WD12X26146
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
- Difficulty in sliding the lower rack in or out
- Excessive noise or grinding during rack movement
- The rack becoming stuck or not rolling smoothly
- Visible wear, cracks, or damage to the roller itself
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
A wheel housing attached to the bottom of the dishwasher dish rack had come off and melted in a wash cycle Jessica B. • Dayton , NV • November 03, 2024
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix!
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Ge part
By: Ge
Part Number: WR02X10585
Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.
This part fixes the following symptoms
-
Door latch failure
-
Ice maker not making ice
-
Not dispensing water
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser...
Read more
More
$9.75
- Compare At:
-
$11.60
- You Save:
-
$1.85
Genuine Ge part
By: Ge
Part Number: WD22X33498
Replace your dishwasher's middle spray arm if it's cracked, broken, or worn. Snaps into place in the mid-rack section. Tool-free installation.
Do-It-Yourself Stories from Customers like You
Dishwasher banging noise when running William S. • Celina , TX • April 12, 2025
Replaced upper and lower rotating sprayers. The design had been slightly change probably cheaper lighter so I was skeptical but after a 30 second remove and replace I ran the dishwasher and no more banging noise. Easy success!
Read more
More
$22.50
- Compare At:
-
$26.55
- You Save:
-
$4.05