Frigidaire Gas Conv Kit Parts

This top burner orifice meters gas to a 14,000-BTU surface burner on your range, maintaining the correct flame size and heat output. Replace a worn or incorrect orifice to restore consistent burner performance and control. What it does

• Regulates gas flow to the 14,000-BTU top burner for proper flame height and shape
• Helps resolve weak or oversized flames and uneven heating
• Can reduce yellow/orange flame tipping and improve simmer control
• Supports reliable ignition by ensuring correct fuel metering

• One 14,000-BTU top burner orifice

• Shut off gas supply and power; allow the cooktop/range to cool before service
• Remove burner cap and head to access the orifice; use the correct socket/wrench
• Install and snug—do not overtighten; verify it's the correct orifice for the burner position and gas type specified for your model
• Reassemble, check for leaks with a soapy-water solution, and verify a stable, blue flame (adjust air shutter if applicable)

For 12k burner.

This assembly combines the spark igniter electrode with the orifice holder for a gas surface burner. It restores dependable ignition and proper gas delivery so the burner lights quickly and consistently.

• Provides the spark to ignite the surface burner
• Routes gas from the valve through the orifice holder to the burner head
• Typical symptoms: burner won't light, clicks but no flame, intermittent ignition, or cracked/chipped igniter insulator
• Replacing a damaged assembly restores reliable ignition at that burner

• Disconnect power and shut off the gas supply before servicing
• Remove grates, caps, and burner head; lift the top or access panel as your model requires
• Disconnect the spark wire, unfasten the old assembly, mount the new one, and reconnect the wire
• Restore gas and power, then check connections for leaks with an approved solution and test ignition

This ignitor orifice assembly is the replacement part that secures the ignitor and routes gas to the oven burner for reliable ignition. It restores proper ignition when the burner assembly is the source of the problem. What it does:

• Directs gas flow to the oven burner while holding the ignitor in the correct position
• Enables stable ignition so the oven can reach and maintain heat
• Commonly used when the oven fails to light, has intermittent ignition, or the burner won't stay lit
• Works as part of the oven's gas ignition system; replaces a worn or damaged orifice/ignitor mount

• One ignitor orifice assembly

• Turn off gas supply and electrical power before attempting service
• Inspect surrounding components (ignitor, valve, burner) and replace any damaged parts

This ignitor orifice assembly directs gas to the oven/range ignitor so burners light reliably. It replaces a worn or damaged orifice assembly to restore proper ignition and consistent flame start-up. What it does:

• Channels the correct gas flow to the oven/range ignitor for reliable ignition
• Helps stop delayed or failed ignition when the orifice is clogged or damaged
• Works as a direct replacement component for the ignitor gas path

• One ignitor orifice assembly

• Turn off electrical power and shut off the gas supply before servicing
• Replace with the exact part to maintain safe ignition performance
• Use basic hand tools; avoid forcing fittings or overtightening

This conversion kit reconfigures a gas appliance so it operates on the correct fuel type, restoring safe, efficient burner performance and proper ignition. Use when an appliance needs to be changed between approved gas types. What it does:

• Provides the parts required to convert the appliance's gas system to the alternate approved fuel type
• Helps the burners and valves deliver correct gas flow for proper flame and heat
• Addresses symptoms like uneven flames, incorrect burner output, or ignition issues caused by wrong gas configuration
• Ensures the appliance matches local fuel supply when installed correctly

• Turn off gas supply and electrical power before beginning work
• Follow the manufacturer's conversion instructions and local codes exactly; additional parts or tools may be required
• Verify proper combustion, flame characteristics, and leak-tight connections after installation

This orifice is the small gas jet that meters fuel to a range or oven burner, helping restore correct flame size and consistent heat for reliable cooking performance. What it does:

• Controls the gas flow to a burner, producing the correct flame for even heating
• Commonly used when flame is unusually small, weak, or uneven
• Helps address burners that light slowly or do not reach proper temperature
• Works as part of the burner assembly with the regulator and valve to maintain safe operation

• One orifice

• Turn off gas supply and electrical power before starting work
• Do not force threads; use appropriate thread sealant if specified by OEM
• After installation, check all fittings for leaks with a gas-safe detector or soapy water

This orifice is a replacement gas jet sized for a stovetop top burner to deliver approximately 8,000 BTU when used with liquid propane (LP), helping burners light and burn evenly. It's a direct-fit service part for compatible ranges and cooktops. What it does:

• Controls gas flow to a single top burner to produce the correct flame size for LP operation
• Restores consistent ignition and steady flame when a burner is weak or won't stay lit
• Helps maintain proper cooking temperatures by metering fuel to the burner
• Used when converting a burner or replacing a worn or damaged orifice

• One top burner orifice (8K, LP)

• Installation requires removing the burner cap and unscrewing the existing orifice; use appropriate fittings and tools
• Turn off the gas supply and power to the range before servicing; work in a well-ventilated area
• After installation, check for leaks with a soap solution and confirm proper ignition and flame characteristics

LP orifice / size #93 (9.5k)

A replacement bake ignitor assembly that provides the hot surface needed to ignite the oven's gas burner for consistent baking and broiling. Replaces a worn or cracked ignitor to help restore normal oven heating. What it does:

• Heats to a high temperature so the oven's gas valve can ignite the burner
• Common symptom: oven won't heat or take much longer than normal to preheat
• Common symptom: burner fails to light even when controls are set correctly
• Works with the oven's safety and gas valve system to allow reliable ignition

• Disconnect power and shut off the gas supply before beginning any repair
• Handle the ceramic ignitor tip carefully; avoid touching it with bare hands
• Verify proper electrical connector and mounting fit before final installation