Frigidaire Range Control Board

This is a replacement refrigerator water filter cartridge that helps reduce taste and odor from your drinking water and ice for cleaner, better-tasting results. Ideal for refrigerators that use an inline/cartridge-style filter. What it does:

• Filters chlorine taste and odor to improve water and ice flavor
• Helps reduce common particulates and sediments from the water flow
• Restores normal water dispensing performance when the original filter is exhausted
• Commonly replaced when water tastes off, ice smells, or water flow is reduced

• Replace with the refrigerator powered off or water supply shut off when possible
• Follow refrigerator manufacturer instructions for proper seating, alignment, and filter reset
• Flush several gallons of water through the dispenser after installation to clear air and loose carbon fines
• Dispose of the used cartridge according to local regulations

This electronic control board manages the oven's front console functions so your range responds correctly to touchpad commands, displays status, and controls timed cycles. It restores normal operation of the user interface and control functions. What it does:

• Processes touchpad/knob inputs and sends signals to heating and timing systems
• Drives the front display so time, temperature, and cycle info are visible
• Enables start/stop and timed-cook features tied to the console
• Helps resolve symptoms like unresponsive controls, blank or erratic display, or inability to start cycles

• One electronic control board / console control assembly as shown

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by its edges and avoid touching components; use anti-static precautions if available
• Reuse existing mounting hardware and connectors unless damaged—confirm fit before final assembly

This clock timer control replaces the oven's built-in timer and clock so cooking functions, timed bake, and display timing work correctly. Restores visible timekeeping and timer-based bake/clean controls for safe, accurate oven operation. What it does:

• Replaces the oven control that displays time and manages timed bake or delayed start functions
• Allows the timer/clock display to light up and accept time-setting inputs
• Restores timed cycle control when the oven won't start or stops mid-cycle due to a faulty timer
• Helps resolve symptoms like unresponsive clock display, non-working minute timer, or inability to set delayed baking

• One clock timer control

• Disconnect power to the appliance at the breaker before beginning any service
• Handle the control module carefully; avoid force when removing or reconnecting wiring harnesses
• Reuse mounting hardware if undamaged; verify connectors are fully seated before restoring power

This electronic clock timer assembly controls the oven's timekeeping and timed cooking functions while providing the front-panel time display. It restores timed bake/clean features and visible clock readout for normal oven operation. What it does:

• Maintains and displays the oven clock so the control shows correct time.
• Enables timed bake, delay start and automatic shutoff features when used by the oven controls.
• Interfaces with the oven control panel to start/stop timed cycles.
• Prevents timed or delay cooking if the clock/timer fails or shows no display.

• One clock timer assembly (single unit as shown).

• Disconnect power to the appliance before inspecting or replacing the clock/timer.
• Access typically requires removing the control panel; handle the control and display lens carefully to avoid damage.
• Use the oven's service manual for disassembly and wiring reference; verify wire routing and connector seating during reassembly.

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set, monitor, and use countdown or delay-start features from the range control panel. It restores visible time display and timer operation. What it does:

• Displays oven clock time and enables countdown/stopwatch-style timer functions
• Allows delayed start and timed cooking features controlled from the front control panel
• Restores audible timer alerts and on-screen time readout when the original clock fails
• Common symptom: blank or flickering clock display, non-working timer, or no audible timer alerts

• Disconnect power to the appliance before servicing to avoid shock.
• Access typically requires removing the control panel; handle the display lens and ribbon cables carefully.
• Verify harness connector orientation before removing the old unit; avoid pulling on wires.
• Follow the appliance's owner manual for clock/time setup.

This electronic clock timer replaces the oven's control module that displays time and manages timed cooking functions. Restores visible timekeeping and allows use of the oven timer and timed bake features. What it does:

• Displays clock and countdown timer so you can monitor time remaining
• Enables timed bake/clean functions that rely on the control's clock
• Replaces a non-working or blank control display
• Helps resolve intermittent or unresponsive timer behaviors

• One complete clock/timer control assembly

• Disconnect power to the appliance before starting any work
• Remove oven control/console trim to access and replace the module; keep small screws and wiring harnesses secure
• Handle the display and circuit board carefully to avoid damage from static or impact

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set cook times, delays and use the timer/countdown features. It replaces a faulty control module to restore timer and display operation. What it does:

• Shows and keeps the oven clock time; allows setting delayed start and timed cook cycles
• Operates the oven's timer/countdown features and audible alerts
• Responds to front-panel touch pads/buttons for programming and control
• Common symptom: blank or unresponsive display, clock not keeping time, or timer functions not working

• One electronic clock timer/control assembly

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the display and control board carefully; avoid touching circuit traces and use anti-static precautions if available
• Installation typically requires removing the control panel or console

This generator is the OEM replacement rotary cam assembly that times and drives mechanical sequences so your appliance operates correctly. It restores proper cycle sequencing to help eliminate failures caused by a worn or damaged cam. What it does:

• Rotates and indexes internal cams/gears to control mechanical switching and timing
• Ensures correct sequencing of cycles and component engagement
• Commonly replaces noisy, stuck, or non-indexing cam assemblies
• Helps resolve symptoms like intermittent operation, failed cycle changes, or mechanical binding

• One generator (rotary cam assembly) as shown

• Disconnect power before servicing to avoid shock or injury
• Access may require panel removal and basic hand tools
• Verify alignment and timing marks during installation for proper operation

This electronic clock timer replaces the oven/range control clock assembly to restore timed cooking and the front-panel clock display. It provides a clear digital time readout and basic timer/clock functions for compatible appliances. What it does:

• Displays the oven/range clock and provides a countdown/count-up timer
• Controls time-based functions used by the appliance's cook cycles
• Common symptom: blank or unlit clock display
• Common symptom: timer won't start or won't advance
• Common symptom: oven won't follow timed or delayed-start settings

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the control gently; avoid touching circuit contacts or LCD surfaces.
• Verify connector orientation and fully seat wiring harnesses before reassembly.

This clock timer is the range/oven's electronic control that runs bake and broil and keeps time. Replacing a failed unit restores the display and keypad response so the oven can start and operate correctly.

• Controls oven heating by switching relays for bake and broil
• Provides clock and timer functions on the front display
• Receives keypad inputs to set temperatures, times, and cooking modes
• Typical failure symptoms: blank or dim display, unresponsive buttons, oven won't start or heat, intermittent beeping or error codes

• Disconnect power at the breaker before servicing
• Note/photograph wire locations; move connectors to the new control one at a time
• Handle the board by the edges and use anti-static precautions
• Transfer any model-specific brackets or faceplate/overlay as required and set the clock after installation