Need Help?
Call
The Igniter and Orifice Assembly is an OEM part for Frigidaire ranges. This part ignites the gas burners and regulates the flow of gas through the orifices.
Causes of a bad Igniter and Orifice Assembly can range from electrical issues or corrosion affecting the igniter to clogs or obstructions in the gas orifices.
Symptoms of a faulty Igniter and Orifice Assembly include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Ordered and replaced the front burner electrodes and orifices. I had to swap out the orifices because the new ones came with natural gas orifices and my stove uses propane. Read more
Fix a burner that won't turn off or heat properly with this dual infinite switch. Controls both inner and outer element rings. Moderate DIY repair.
Relatively easy DIY Read more
Restores the finished look around your range door perimeter. Replaces cracked, discolored, or rusted trim that frames the door and secures outer components.
Replaced the door trim by removing the 2 screws holding the oven handle on, then removing the 4 screws across the bottom of the door. lifted off the door trim with the plastic door cap. removed the door trim from the cap by sliding it out. attached the new door trim with the 4 screws that had been removed before. then slid the new glass into place. next i slid the plastic door cap onto the new door trim and the glass and centered the glass evenly over the door trim. finally reattached the... Read more
This assembly includes the spark ignition switches and wiring harness that control the igniter circuits on a gas range or cooktop. The switches detect burner position and signal the igniters to spark when a burner knob is turned. Replace this assembly if burners fail to ignite, click continuously without lighting, or if the spark module does not activate consistently.
My husband and myself didn't agree on which part was the exact problem. He felt it was the valve. I felt it was the ignitor/ orifice. And we both agreed the Harness-Ignitor needed to be replaced. So we ordered all 3, and I'm not sure if in fact all three were needed or not, but now with those parts replaced, the range is working like brand new!! Thanks to all the videos and diagrams on the website we were able to fix it ourselves easily. And the price was cheaper then other websites, also it... Read more
Oven won't heat or bake properly? A failed bake element is usually the cause. This bottom heating element restores even baking. Easy 15-minute DIY fix.
It's was easy to replace. Unplugged the oven from the wall, unscrew the two screws that hold the element to the back of the oven and pulled it away from the oven. Then just pull off the two wires at the end of the bake element. Install the new one in the revers order, easy. Read more
Burner cap sits atop the gas burner base to distribute flame evenly. Replace if cracked, warped, discolored, or missing to restore proper heat distribution.
Found web site. Called the 800 number. Placed the order. 2 days later, they were at my door. Read more
This is an electronic control board that mounts inside the range and manages oven functions such as temperature regulation, bake and broil cycles, and display operation. It receives input from the touchpad or control panel and sends signals to heating elements and other components. Replace this board if the oven fails to heat, displays error codes, has an unresponsive control panel, or behaves erratically during cooking cycles.
So initial thought was bad bake igniter. I'bve replaced this before so I replaced it again and it wouldn't glow. Checked broil igniter and same thing, no glow. Checked voltage at molex connector for bake igniter and it went from 6.6v to 3.4v when triggered to glow -- well below the 120v expected. Ordered new clock/controller and overlay -- it shipped the next business day! Removed a handful of screws from the back panel to expose the clock/controller and removed/ replaced it with new... Read more
Oven broiler not heating or working? This broil element generates radiant heat at the top of your oven for browning and crisping. DIY-friendly repair.
Replaced the Broil element. Read more
Meters gas flow to your range or cooktop burner for proper flame size. Replace worn, clogged, or missing orifices or when converting between propane and natural gas.
Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more
If your range has no power or burnt plastic smell, the terminal block may be melted. This kit restores secure power connections. Moderate DIY repair.
Replaced the terminal block. Read more
The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.
Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.
Symptoms of a bad oven light rocker switch include:
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it. Read more
Replacement surface burner head for gas ranges and cooktops. Distributes gas through precision ports for even flame. Needed when original is clogged, damaged, or corroded.
Conversion kit said put propane orifice .109 in to correct the problem but I had to use the .102 orifice. Read more
Fix delayed oven ignition or gas odor with this spark electrode. Creates the spark that lights your oven burner. DIY repair in under 1 hour.
We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back. Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Transparent glass panel for your range oven door. Replace when cracked, broken, or clouded to restore clear viewing and proper heat insulation.
Replacement glass panel for oven door outer window. Restores clear viewing when cracked, shattered, or stained. Installs in door frame assembly.
Ordered glass and trim kit and replaced them myself. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.