Frigidaire Refrigerator Drawer, Shelf, Pan

Supports the crisper cover glass in your refrigerator. Replace this side track or bracket if cracked, broken, or causing the cover to sag or drawers to misalign.

Replaces a broken, cracked, or missing door bin in your refrigerator. Snaps into door slots to restore organized storage for condiments, jars, and bottles.

Replacement door rack bar for refrigerator door storage. Installs in door to hold bins and shelves. Order if original is cracked, bent, or broken.

Replacement shelf support for refrigerators. Secures and stabilizes shelves to hold stored items. Replace if cracked, broken, or worn from impacts or overloading.

Replacement deli drawer for your refrigerator's fresh food section. Restores organized storage for meats and cheeses when original is cracked or broken.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels

Structural support that holds and aligns shelves or racks in your side-by-side refrigerator. Replace when worn, broken, or missing to restore stability.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Replace a cracked or missing refrigerator bin door to keep items contained and organized. This cover restores proper function so contents stay put and are easy to access when opening and closing the refrigerator. What it does:

• Serves as the cover for a storage bin and pivots open/closed
• Helps retain contents to prevent items from falling out during door movement
• Restores secure, tidy storage when the original door is damaged or missing
• Common symptoms: cracked plastic, broken hinge tabs, won't latch, won't stay attached

• 1 bin door

• Unplug the appliance and remove items from the bin before starting
• Release the old door from its side tabs/hinges; remove any debris from the mounting points
• Align the new door's hinge pins/tabs with the bin's slots and press to snap into place
• Check for smooth pivot and proper latching before reloading items

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a sliding storage basket with trim that fits inside a freezer drawer to organize and separate frozen items. It slides along rails within the freezer compartment for easy access to stored food. Replace this basket if it is cracked, broken, or if the sliding mechanism no longer moves smoothly.

Replacement interior bin door that covers and secures refrigerator storage bins. Install when the original door is cracked, broken, or missing.

Keep your meats and cheeses organized and easy to access. This deli drawer cover forms the shelf above the deli/meat drawer and provides a smooth surface while guiding the drawer as it opens and closes.

• Supports and covers the deli/meat drawer compartment
• Restores a stable shelf surface if the original frame is cracked or broken
• May correct issues like a sagging shelf, sticking drawer, or broken cover frame
• Helps maintain proper drawer alignment for smooth operation

• Unplug the refrigerator before service
• Remove food items and the deli drawer to access the cover
• Transfer any reusable parts from the old cover if applicable
• Seat the new cover fully in its supports to ensure smooth drawer travel

Replace your cracked or broken refrigerator door lower bin. This storage bin installs in the door to hold condiments and beverages. Order now.

This is a lower door shelf bin designed to mount on the inside of the freezer door. It holds frozen items in place and keeps the freezer compartment organized. Replace this bin if it is cracked, warped, or if the mounting tabs have broken, causing the bin to fall off the door.