Frigidaire Refrigerator Motor

The Condenser Fan Motor is an OEM replacement part for Frigidaire refrigerators. It is a component responsible for drawing heat away from the refrigerator's cooling system. By rapidly spinning the condenser fan blades, the motor works to dissipate heat buildup and ensure optimal cooling performance.

Causes of a bad condenser fan motor include bearing wear over time, damage from moisture or dirt infiltration, or failure of electronic motor components. 

Symptoms of a bad condenser fan motor include:

• Inadequate or inconsistent cooling within the refrigerator 
• Loud buzzing or rattling noises emanating from the rear
• Slow or failed rotation of the condenser fan blades

This OEM Frigidaire replacement condenser fan motor is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore-branded refrigerators. 

This auger motor powers the ice dispenser, rotating the ice-bin auger to feed cubes or crushed ice to the door chute. A failed motor stops dispensing, leaving ice in the bucket when the paddle or lever is pressed.

• Drives the auger that moves ice from the bin to the dispenser chute
• Restores dispensing when the original motor is seized or burned out
• Common symptoms: no ice through the door, auger doesn't turn, motor only hums or clicks
• Note: Won't resolve issues from a jammed auger, frozen ice bucket, or broken drive parts

• Disconnect power before servicing; wear cut-resistant gloves
• Remove the ice bin to access the motor area as designed on your model
• Note wire orientation; transfer any reusable brackets or hardware from the original motor
• Align the drive interface and secure; test both cube and crush functions before reassembly

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. The evaporator fan motor functions continuously to circulate chilled air through vents within the refrigerator and freezer compartments. Consistent air flow is integral to maintaining even interior temperatures.

Causes of a bad evaporator fan motor can be general wear over time leading to diminished motor performance, or failures in the electrical components that power the motor.

Symptoms of a bad evaporator fan motor include:

• Frost or ice buildup in the vents or on interior surfaces from poor circulation
• Development of warm or cool pockets within compartments
• Higher compressor run times and energy usage from inefficient cooling
• Loud buzzing or grinding noises emitted from the rear panel area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Evaporator Fan Motor is an OEM replacement part for Frigidaire refrigerators. Located inside the freezer, this motor is responsible for powering the evaporator fan, which circulates cold air throughout the refrigerator and freezer compartments. 

Causes of a bad evaporator fan motor can include bearing wear, electrical faults, or failure due to extended use over time. Without proper air circulation, cold spots can develop inside the fridge.

Symptoms of a bad evaporator fan motor include:

• Inconsistent or fluctuating interior temperatures  
• Formation of frost or ice buildup
• Cold air not reaching all shelves and compartments evenly
• Excessive noise originating from the fan/motor area

This OEM Frigidaire replacement motor restores critical airflow needed to maintain temperatures. It is also compatible with refrigerator models by Electrolux, Gibson, Kelvinator, and Kenmore. 

The Fan Motor is an OEM component for Frigidaire refrigerators. Located inside the refrigerator compartment, this specialized motor powers airflow and circulation through ducts within the cabinet.

Causes of a malfunctioning fan motor can include normal wear from constant operation, collecting debris that causes imbalance or binding, and motor winding failure over extended use.  

Symptoms requiring replacement are: 

• Reduced/insufficient air circulation within the refrigerator  
• Abnormally high temperatures or frost accumulation
• Loud buzzing or grinding noises emanating from the motor

This OEM part fits Electrolux, Gibson, Kelvinator and select Kenmore models as well for a direct fit. Replace promptly for dependable fan performance.

This motor kit drives the microwave's glass turntable to rotate food for even heating. Replacing a worn motor restores smooth, consistent turntable motion and helps prevent cold spots during cooking or reheating.

• Powers the turntable tray via the coupler to rotate food evenly
• Common failure signs: turntable not turning, intermittent or noisy rotation, or jerky movement
• Helps resolve uneven heating caused by a stalled or slipping turntable

• Unplug the microwave before service; high-voltage components can retain a charge
• Access is typically from the bottom; remove the turntable tray and coupler before disassembly
• Note wire orientation and shaft alignment; transfer any brackets as required
• Test rotation before reassembling the exterior panels

This condenser fan motor drives the fan that cools the condenser coils and compressor. Replacing a weak or noisy motor restores proper heat removal so the refrigerator can reach and maintain set temperatures.

• Rotates the condenser fan to move air across the condenser coils and compressor
• Helps prevent compressor overheating and supports stable cooling performance
• Common symptoms of failure: fan not running, loud noise from the rear bottom, warm refrigerator temperatures, or hot cabinet sides

• Disconnect power and pull the refrigerator away from the wall; remove the lower rear access panel
• Note wire positions; disconnect the harness and remove the old motor
• If reusing existing parts, carefully transfer the fan blade and any mounting hardware; mount the new motor securely
• Ensure the blade spins freely with proper clearance; reinstall the cover and restore power to confirm the fan runs with the compressor

This condenser fan motor powers the refrigerator condenser fan to move air across the condenser coils, helping the appliance cool efficiently. Replaces a failed motor to restore proper condenser airflow and reduce overheating risk. What it does:

• Turns the condenser fan blade to circulate air over condenser coils
• Helps maintain correct operating temperature for the compressor and refrigerant
• Commonly used when the fan is noisy, not spinning, or the compressor overheats
• Works as the main motor for the condenser fan assembly in the cooling system

• Disconnect power to the appliance before starting any repair
• Handle the fan blade and motor mounting carefully to avoid bending blades or damaging wiring
• Test operation after installation;

This refrigerator fan motor drives the fan that circulates air through the cooling system, helping maintain even temperatures. Replacing a worn or noisy motor can restore proper airflow and cooling performance.

• Spins the fan blade to move air across coils and through the appliance's airflow passages
• Helps maintain set temperatures and consistent cooling throughout the unit
• Common failure signs: fan not running, intermittent/slow operation, loud humming, grinding, or squealing
• Symptoms include weak airflow, poor cooling, warm spots, or the compressor running longer than normal

• Disconnect power before servicing; wear cut-resistant gloves
• Access location varies by model; note wire positions and hardware
• Transfer the existing fan blade and mounting hardware if required by your model
• Ensure the fan spins freely and wires are routed clear of the blade before restoring power

This evaporator fan motor circulates cold air across the evaporator coil so your refrigerator/freezer cools evenly and runs efficiently. Replacing a failed motor restores airflow to help maintain consistent temperatures. What it does:

• Spins the evaporator fan to move cold air through the evaporator compartment and into the cabinet.
• Helps prevent frost buildup by maintaining steady airflow over the coil.
• Common symptoms: loud or grinding noise from the freezer, weak or no airflow, uneven cooling or warm spots.
• Works as the refrigerator's evaporator airflow motor to support normal compressor/cooling operation.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access typically requires removing interior panels in the freezer/evaporator area; handle evaporator coil and insulation carefully.
• Inspect fan blade and housing for damage; replace blade if cracked or missing.

This evaporator fan motor circulates cold air through the refrigerator and freezer compartments to maintain even temperatures and efficient cooling. A direct-fit replacement restores airflow and helps prevent warm spots. What it does:

• Spins the evaporator fan to push cold air across the evaporator coil and into the cabinet
• Helps maintain consistent temperatures in fridge and freezer compartments
• Commonly replaced when the fan is noisy, not spinning, or when sections of the refrigerator are warming
• Supports proper defrost performance by ensuring airflow over the evaporator

• One evaporator fan motor

• Disconnect power to the appliance before starting any work
• Access typically requires removing interior panels and the evaporator cover; follow your model's service instructions
• Handle the evaporator coil and fan blades carefully to avoid damage
• Test operation after installation and reassemble panels securely

This condenser fan motor circulates air across the condenser coils to help remove heat from the refrigeration system, improving cooling efficiency and preventing overheating of components. What it does

• Spins the condenser fan blade to move air over condenser coils for proper heat rejection
• Helps maintain compressor and system temperatures during normal cooling cycles
• Can cause warm cabinet temperatures or noisy operation when worn or seized
• Stops cycling correctly if the motor fails, which may lead to extended run times

• Disconnect power to the appliance before starting any service.
• Handle sharp condenser fins and mounting hardware with care; use gloves as needed.
• Verify fan blade clearance and secure all mounting screws before restoring power.
• After installation, the motor runs quietly and the fan blade spins freely.

This motor assembly powers the dryer drum and blower to tumble laundry and move air through the cabinet for consistent drying. It restores rotation and airflow when the original motor has failed. What it does:

• Drives the drum to tumble clothes during the dry cycle
• Powers the blower to circulate air through the lint screen and exhaust
• Commonly replaced for symptoms like no tumbling, reduced airflow, or burning/motor noise
• Works as a direct-replacement motor assembly when the OEM part number matches

• One motor assembly (single complete unit)

• Disconnect power (unplug or shut off breaker) before starting any repair
• Follow your appliance's service manual for panel removal and part routing
• Support the drum and wiring during removal to prevent damage