Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

General Electric Dishwasher Parts

Ge Dishwasher Door Latch Knob
Genuine Ge part
By: Ge
Part Number: WD9X352

White plastic knob for dishwasher door latch handle. Replaces broken, cracked, or missing latch knobs. Slides onto latch assembly and secures with screw.

Do-It-Yourself Stories from Customers like You Replaced a knob on the dishwasher lock handle   David M. • Chattanooga , TN • September 08, 2015

The new one slid right on easily. It didn't come with a screw but the threads are the same as the screws that are used for putting in light switches so all you need to do is either get a short one or trim a light switch or outlet screw down to size. Read more

More
$12.47
Compare At:
$14.84
You Save:
$2.37

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Door Vent
Genuine Ge part
By: Ge
Part Number: WD12X10026

Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.

Do-It-Yourself Stories from Customers like You Worn out tired dishwasher with some broken parts   Laura C. • Black Canyon City , AZ • January 03, 2017

Found AppliancePartsPros.com and looked up parts and ordered replacement parts. ( VERY easy!) Replaced the spray arm assembly and door vent via the handy Q&A repair section, as well as a thorough cleaning, and VOILA! Clean dishes again!! Thanks for making it easy! Read more

More
$14.39
Compare At:
$16.98
You Save:
$2.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Rinse Aid Dispenser Tank Assembly
Genuine Ge part
By: Ge
Part Number: WD12X10264

If your dishes have spots or dry poorly, the rinse aid dispenser may be clogged or leaking. This tank assembly restores proper rinse aid delivery.

Do-It-Yourself Stories from Customers like You Bacteria colony in drain!   Rhonda D. • Tampa , FL • October 11, 2015

Ordered new parts and put them in! Read more

More
$38.65
Compare At:
$45.99
You Save:
$7.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Switch Leaf Contact
Genuine Ge part
By: Ge
Part Number: WD1X1363

Metal contact leaf for dishwasher switch assemblies. Replace if the original contact is bent, corroded, worn, or missing to restore proper circuit closure.

More
$20.38
Compare At:
$32.08
You Save:
$11.70

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Sump Clamp
Genuine Ge part
By: Ge
Part Number: WD1X1392

Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Leaking pump connector.   David M. • Ypsilanti , MI • October 13, 2018

Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more

More
$15.95
Compare At:
$18.98
You Save:
$3.03

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Drain Solenoid Housing
Genuine Ge part
By: Ge
Part Number: WD21X10356

Plastic housing that secures the drain solenoid to the pump assembly. Replace if cracked, broken, or missing to properly position the solenoid mechanism.

Do-It-Yourself Stories from Customers like You Water dripping into washer after completing a load would have to do an extra spin to get rid of excess water.   Ernest B. • Gibson , LA • November 16, 2017

Viewed you video on Youtube.com and saw how easy it was to change out the triple water valve. Job completed and working like a charm now. Read more

More
$6.72
Compare At:
$8.36
You Save:
$1.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Control Timer
Genuine Ge part
By: Ge
Part Number: WD21X33642

Dishwasher won't advance through cycles or stops mid-wash? The control timer regulates washing, rinsing, and drying phases. Moderate DIY repair.

More
$73.95
Compare At:
$88.00
You Save:
$14.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Control Panel Keypad Assembly
Genuine Ge part
By: Ge
Part Number: WD34X11587

Replacement keypad assembly for dishwasher control panels. Restores button function when keys are unresponsive, intermittent, or missing lights.

Do-It-Yourself Stories from Customers like You Some of the lights/buttons on the keypad of my ge dishwasher stopped working and a few weeks later the machine wouldn't start anymore   Julio D. • Buffalo , NY • December 18, 2015

I ordered the Keypad strip and just replaced the old one with the new one. Read more

More
$145.48
Compare At:
$174.58
You Save:
$29.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Detergent Dispenser Bracket
Genuine Ge part
By: Ge
Part Number: WD01X10207

Secures the detergent dispenser to the dishwasher inner door panel. Replace if cracked, broken, or rusted to restore proper alignment and mounting.

Do-It-Yourself Stories from Customers like You Internally rusted out brackets   Joe D. • Philadelphia , PA • January 25, 2020

New brackets. Read more

More
$6.72
Compare At:
$8.36
You Save:
$1.64

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Sump Gasket
Genuine Ge part
By: Ge
Part Number: WD08X23655

Seals the sump to the tub to prevent leaks in your dishwasher. Replace when worn or flattened to stop water leaks and maintain wash performance.

More
$14.95
Compare At:
$17.94
You Save:
$2.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Float Stem (Water Level)
Genuine Ge part
By: Ge
Part Number: WD12X335

This float stem is part of the dishwasher's water-level/overfill system. It guides the tub float and actuates the float switch so the unit fills correctly and shuts off on time. Replace a worn or broken stem to restore reliable fill protection.

  • Connects the float to the switch mechanism beneath the tub
  • Provides smooth vertical travel of the float through the opening
  • Triggers the float switch to stop filling at the proper level
  • Causes symptoms such as no fill, continuous filling/overfilling, a stuck or wobbly float, or intermittent fill issues
What's included: 1 float stem Install notes:
  • Disconnect power at the breaker and shut off the water supply before servicing
  • Remove the lower rack; lift off the float cap from inside the tub
  • On some models, release the retainer/clip from beneath the tub; pull out the old stem
  • Guide the new stem through the opening and ensure it engages the float switch lever; confirm the float moves freely and actuates the switch before restoring power

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$25.57
Compare At:
$30.68
You Save:
$5.11

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Float Switch (Drain-Pan Sensor)
Genuine Ge part
By: Ge
Part Number: WD21X479

This float switch detects rising water in the refrigerator drain pan or lower cabinet area and signals the appliance control to help prevent overflow and water damage. Use it to replace a failed or intermittent water-level sensor. What it does:

  • Senses high water level in the drain pan or collection area and closes the circuit to alert the control.
  • Helps identify causes of leaks and pooling under or behind the appliance.
  • Commonly used when symptoms include water on the floor, drip pan overflow, or water-related error/alert conditions.
  • Matches OEM function for refrigeration units that include a float-based water-detection circuit.
What's included: One float switch. Install notes:
  • Disconnect power to the appliance before starting any repairs; shut off the water supply if working near water lines.
  • Access may require removing lower kick plate or back panel; handle plastic clips and fasteners carefully.
  • Disconnect electrical connector gently and note orientation before installing the replacement; secure wiring and verify float moves freely.
  • Restore power and run a short test cycle or simulate water level to ensure proper operation.

Do-It-Yourself Stories from Customers like You The dish washer was not fill with water   Stanley B. • Newberry Springs , CA • December 14, 2014

1. Removed the water inlet/shut off valve, removed and cleaned the screen. while the valve was removed applied electrical power to the valve and it worked just fine. 2. replaced the broken float switch. Read more

More
$20.38
Compare At:
$78.77
You Save:
$58.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Inner Door Panel
Genuine Ge part
By: Ge
Part Number: WD31X10004

Replaces the interior face of your dishwasher door. Ideal when the door liner is cracked, dented, melted, or visibly worn. Restores a clean surface.

Do-It-Yourself Stories from Customers like You Rinse aid dispenser didn't work and soap dispenser door would not close ge dishwasher   Jerry C. • Lily , KY • March 18, 2017

Replaced the inner door panel and rinse aid tank. The videos from AppliancePartsPros.com were very helpful. Everything works as designed now. Read more

More
$290.79
Compare At:
$343.13
You Save:
$52.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Main Control And Tactile Board Kit
Genuine Ge part
By: Ge
Part Number: WD21X10378

Dishwasher won't start or buttons unresponsive? This main control and tactile board kit restores cycle selection and operation. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Dishwasher won't start   Radoslaw Z. • Davenport , FL • April 02, 2016

I've ordered new main and tactile board and installed it. Everything worked fine after boards exchange. Ran full cycle, no problems at all. Dis-assembly and installation was really easy, all I needed was Phillips screwdriver and a star tip attachment wrench (I'm always asking myself question why this is done like that? , why can't it be just regular Phillips screw?) Read more

More
$150.40
Compare At:
$180.48
You Save:
$30.08

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Dishwasher Control Timer
Genuine Ge part
By: Ge
Part Number: WD21X33643

Fix a dishwasher that won't advance through cycles or stops mid-wash with this electromechanical timer. Controls cycle progression and automatic shutoff.

More
$33.54
Compare At:
$39.91
You Save:
$6.37

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ge Counter Mounting Bracket Kit
Genuine Ge part
By: Ge
Part Number: WX13X10001

Kit contains 2 brackets and 4 screws. Used for granite and corning

Do-It-Yourself Stories from Customers like You Needed to change to a side mount for my dishwasher because of a granite counter   Kristine C. • Brooklyn , MI • April 11, 2015

The parts fits perfectly! I side mounted the brackets to the washer tub and then drilled into my cabinets for a tight perfect fit! My dishwasher is no longer falling forward when the drawer is out to load dishes. The best part was the chat! I found and ordered the part on chat. How easy was that?????? Read more

More
$21.67
Compare At:
$25.79
You Save:
$4.12

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store