General Electric Dryer Bearing Parts

The Rear Drum Bearing Kit is an OEM replacement part for GE dryers. It is a comprehensive kit that includes both rear drum bearings and necessary mounting hardware. These bearings play a vital role in smoothly rotating the dryer drum during cycles, reducing vibrations and noise.  

Symptoms of bad bearings include:

• Excessive shaking or vibrating during cycles
• Loud grinding or scraping noises emanating from the rear drum area   
• Difficulty turning or rotating the dryer drum by hand
• Increased wear and early failure of other components 

Causes of bad bearings can include normal wear and tear over time, exposure to excessive loads or unbalanced loads that strained the bearings, or damage from extended use without proper lubrication.

This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bearing Slide Assembly is an OEM component for GE electric clothes dryers. As an integral part of the dryer tumbler system, this assembly includes the bearing slides that allow smooth rotation of the tumbler drum during drying cycles. 

Symptoms of faulty bearing slides include:

• Abnormal vibrations or shaking of the dryer cabinet 
• Noisy operation that gets louder over time
• Rubbing or grinding sounds coming from inside the machine
• Reduced tumbler movement or inability to manually turn the drum

Causes involve general wear of plastic bearing surfaces from years of drum rotation as well as potential damage or misalignment from excess stress on the slides.

This GE OEM replacement helps maintain balanced tumbler movement. Compatible with Hotpoint, RCA, and some Kenmore dryers using the bearing slide assembly design.

The Drum Support Bearing is an OEM part for GE dryers. It is designed to support the rear of the dryer drum, ensuring smooth and stable rotation during the drying cycle. This bearing reduces friction and wear on the drum and motor, contributing to efficient and quiet dryer operation.

You should replace the drum support bearing if it becomes worn out or damaged. Causes of a bad drum support bearing can include regular wear and tear from frequent use, lack of lubrication, or debris accumulation. A faulty bearing can lead to increased friction and noise, affecting the dryer's performance.

Symptoms of a bad drum support bearing include:

• Squeaking or grinding noises during the drying cycle
• The dryer drum not rotating smoothly or being off-balance
• Increased drying times or uneven drying of clothes
• Visible wear or damage to the bearing

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Front Drum Support Bearing Glide is an OEM part for GE dryers. Each dryer utilizes three of these parts, and they should be replaced as a set for optimal performance. This drum glide is 2-5/8 inches long and 1/2 inch wide. They provide smooth rotation for the dryer drum by supporting its front as it turns. 

Causes of a bad front drum support bearing glide can include normal wear and tear over time, excessive load weights, or debris accumulation that can cause friction and damage. When the glide wears out, it can lead to increased noise levels and potential damage to other dryer components.

Symptoms of a bad front drum support bearing glide may include:

• Squeaking or grinding noises during dryer operation
• Uneven drum rotation or wobbling
• The drum getting stuck or difficult to turn manually

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rear Drum Bearing Kit is an OEM part for GE dryers. The kit includes a rear bearing, shaft support, ball shaft, ball bearing, ball bearing retainer, high-temperature lubricant, and screws required for installation. 

Causes of a bad rear drum bearing can include normal wear and tear over time, exposure to excessive heat, or heavy use that puts strain on the bearing. A failing bearing can cause the drum to become misaligned, creating friction and noise during operation.

Symptoms of a bad rear drum bearing include:

• Squeaking or grinding noises when the dryer is running
• The drum being difficult to turn manually
• Clothes not drying evenly due to improper drum rotation
• The dryer stopping mid-cycle or failing to start

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Bearing only, to get complete assembly order WE25M40

This front drum bearing kit replaces the worn top bearing that supports the front of the dryer drum. It restores smooth, quiet rotation and helps prevent scraping noises or fabric snags caused by a damaged bearing surface.

• Supports the front of the drum and provides a smooth glide surface for rotation
• Often resolves squealing, scraping, or grinding from the front panel area
• Can correct a drum that sags, thumps, or is hard to turn by hand
• Helps prevent clothes from catching near the drum opening

• Disconnect power and turn off gas supply before servicing
• Remove the top/front panel; support the drum when the bearing is detached
• Note belt routing; align and secure the new bearing per kit instructions
• Rotate the drum by hand to ensure smooth movement before reassembly and testing

This top bearing assembly supports the front of the dryer drum and includes felt seals to help maintain proper airflow and reduce noise. Replacing a worn bearing restores smooth drum rotation and helps prevent scraping sounds and fabric snagging. What it does:

• Supports and guides the front of the drum for smooth, quiet operation
• Felt seals help contain heat and airflow for consistent drying
• Restores drum alignment to reduce scraping/squealing and thumping
• Common symptoms include drum dragging or sagging, longer dry times, lint at the door, and black marks on clothes

• 1 top bearing assembly with felt seals

• Disconnect power; shut off gas supply for gas dryers
• Lift the top and remove the front panel; support the drum during service
• Remove the old bearing and install the new assembly, seating the felt seals evenly against the drum opening
• Hand-rotate the drum to ensure smooth travel before reassembly and testing

This bearing seal helps protect a dryer drum or motor shaft bearing from lint, moisture and debris to keep the bearing turning smoothly and extend service life. It's a small replacement part used where a tight seal is needed around a rotating shaft. What it does:

• Seals the gap around a shaft to keep lint, dust and moisture out of the bearing area
• Helps maintain proper bearing lubrication and reduces premature wear
• Restores the intended barrier between the drum/motor shaft and the cabinet interior
• Can reduce noise or roughness caused by contaminated bearings when installed as part of a bearing service

• One bearing seal

• Disconnect power (and gas if applicable) before starting any repair
• Access may require removing panels, the drum or motor depending on model; follow manufacturer service instructions
• Inspect bearing and surrounding components and replace any worn parts to avoid repeat failure
• Use only OEM-recommended parts and avoid over-stressing the seal during installation

The TOP BEARING W/ SEALS is an OEM part for GE dryers. It incorporates both the bearing and seals that facilitate smooth drum rotation at the top of the dryer cylinder. During cycles, the bearing supports the weight of the tumbling drum while the seals prevent hot air from escaping around the drum shaft. 

Symptoms of a faulty top bearing and seals include: 

• Excessive noise or vibration from the area housing the drum shaft
• Reduced drying efficiency as hot air leaks around the drum perimeter   
• The dryer tub potentially hanging crooked within the cabinet
• Difficulties with the drum rotating or staying on track at the top

Causes of failure are typically normal wear over thousands of cycles. Lint contamination or impact damage can also degrade the seals or disrupt proper bearing lubrication.

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.