General Electric Microwave Parts

The Door Latch Assembly is an OEM part for GE microwaves. This component ensures that the microwave door securely closes and locks, which is essential for the microwave to operate safely and efficiently.

Causes of a bad microwave door latch assembly can include regular wear and tear, physical damage from slamming the door, or misalignment over time. If the latch assembly is compromised, the microwave may not start or operate correctly, posing potential safety risks.

Symptoms of a bad microwave door latch assembly include:

• The microwave door not closing or locking properly
• The microwave not starting or running intermittently
• Error messages or warnings on the control panel
• Difficulty in opening or closing the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

• Inaccurate temperature readings and baking inconsistencies
• Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Light Bulb Socket is an OEM part for GE microwaves. It holds the light bulb securely in place within the microwave, ensuring proper illumination of the interior when the door is opened or the microwave is in operation.

Causes of a bad light bulb socket can include wear and tear over time, exposure to high heat, electrical faults, or damage from replacing the bulb improperly.

Symptoms of a bad light bulb socket include:

• The interior light not turning on when the microwave is in use
• Flickering or intermittent lighting
• Difficulty securing the light bulb in the socket
• Visible damage or discoloration to the socket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Exhaust Adapter is an OEM replacement part for GE built-in microwave ovens. Located at the top or rear of the microwave, the exhaust adapter connects the ventilation system that removes steam, smoke, and odors produced during cooking. 

Symptoms of a bad exhaust adapter can include: 

• Moisture or steam films accumulating on interior surfaces   
• Strange vibration noises coming from the ventilation connection
• Reduced cooking efficiency as hot air lingers inside the cavity
• Visible cracks, separations, or blockages in the adapter itself

Causes of a bad exhaust adapter microwave include natural wear from repeated heating cycles, cracks or damage from installation/removal, or blockages from grease/ residue accumulation over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore built-in microwave models. 

The Charcoal Filter is an OEM part for GE microwaves and range hoods. This filter helps to remove smoke, odors, and grease from the air during cooking. It is designed to fit securely within the microwave or range hood, providing efficient filtration and improving the overall air quality in the kitchen. The filter measures approximately 2-1/2 in. x 11 in. x 3/8 in.,

Causes of a bad charcoal filter can include prolonged use without replacement, accumulation of grease and food particles, or exposure to excessive smoke. Over time, the filter loses its effectiveness and requires replacement to maintain optimal performance.

Symptoms of a bad charcoal filter include:

• Increased smoke or odors while cooking
• Reduced air flow or ventilation efficiency
• Noticeable grease buildup on the filter
• Unpleasant smells lingering in the kitchen

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Air Filter is an OEM part for GE microwaves. This component is essential for trapping grease, smoke, and odors during cooking, maintaining a clean and safe kitchen environment. It is typically located above the cooking surface or within the microwave's ventilation system. The filter measures approximately 6.5 inches deep by 13.5 inches wide

Causes of a bad air filter can include clogging from grease and food particles, physical damage, or general wear over time. A compromised air filter can reduce the efficiency of the microwave's ventilation, leading to poor air quality and potential buildup of contaminants.

Symptoms of a bad air filter include:

• Reduced ventilation efficiency
• Increased smoke or odors during cooking
• Visible grease buildup on the filter
• The filter appearing damaged or excessively dirty

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.

• Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.

• Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rotating Ring Assembly is an OEM part for GE microwaves. It supports the microwave turntable, enabling it to rotate during operation to ensure even cooking and heating of food. This ring is approximately 10 inches in diameter.

Causes of a bad rotating ring assembly can include wear and tear from regular use, accumulation of food debris or grease that hampers movement, or physical damage such as cracks or warping from overheating.

Symptoms of a bad rotating ring assembly include:

• The turntable not rotating
• Uneven cooking or heating of food
• Noisy or jerky movement of the turntable
• Visible damage or warping of the ring

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ring Assembly is an OEM replacement part for GE microwaves. It is located at the perimeter of the microwave carousel tray, providing structure and support while rotating.

Causes of a bad ring assembly can include cracking or splitting of the plastic over years of use, damage from impact with carousel edges, or loose fittings where the ring meets the turntable shaft.

Symptoms of a bad ring assembly include:

• Wobbling or asymmetry of the carousel tray during rotation
• Grating or scraping sounds from below when in use
• Difficulty smoothly rotating the food for even cooking
• Cracks or breaks that compromise the integrity of tray support

This OEM GE replacement ensures the continued balanced spinning of the microwave carousel.

The Stirrer Fan Cover is an OEM replacement part for GE Microwaves. It is responsible for shielding internal mechanisms during operation. 

Causes of a faulty cover include normal wear over time, cracking, or warping due to exposure to high heat. 

Symptoms of a problematic cover include:

• Excessive noise or vibration during use
• Reduced or uneven heating performance
• Gaps exposing vulnerable electrical components
• Loose pieces that could fall into the microwave cavity

This GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Cooking Tray is an OEM part for GE microwaves. This tray sits on the turntable in the microwave and holds the food items being heated or cooked, allowing for even rotation and uniform cooking.

Causes of a bad cooking tray can include cracks or breaks from heavy use, exposure to extreme temperatures, or accidental drops.  

Symptoms of a bad cooking tray include:

• Cracks or chips on the tray
• Difficulty in rotating or the tray not rotating at all
• Unstable placement of food items
• Uneven cooking results

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods and microwaves. It captures grease and other airborne particles generated during cooking, preventing them from accumulating in the appliance and ductwork. This filter helps maintain the efficiency of the exhaust system and reduces the risk of grease fires.

Over time, the filter can become saturated with grease and other residues, reducing its effectiveness and potentially causing odors or airflow issues.

Symptoms of a bad grease filter include:

• Reduced airflow or ventilation performance
• Persistent cooking odors
• Visible grease buildup on the filter
• The filter appearing damaged or worn

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Guide Roller Assembly is an OEM part for GE microwaves. It supports the turntable as it rotates, ensuring even cooking by allowing the turntable to move smoothly and consistently. This assembly typically includes the rollers and the frame that houses them, fitting securely at the bottom of the microwave cavity.

Common causes of a bad guide roller assembly include normal wear and tear, exposure to heavy loads, or accidental impacts.

Symptoms of a bad guide roller assembly include:

• The turntable not rotating or moving unevenly
• Unusual noises, such as grinding or clicking, during operation
• The turntable being off-balance or wobbling
• Difficulty in installing or removing the turntable

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.

Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.

Symptoms of a bad thermostat include:

• Microwave not heating properly
• Overheating or shutting off unexpectedly
• Error codes related to temperature issues
• Inconsistent cooking times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Door Latch is an OEM replacement part for GE microwaves. It securely fastens the microwave door when a cooking cycle is activated.  A well-functioning latch is important for safety purposes, preventing accidental door openings and potential radiation exposure during operation.

Causes of damage usually involve wear from normal usage over time as the latch mechanism is utilized frequently. Failure can impair safety.

Symptoms of a defective door latch include:

• The door not fully closing or staying fully closed
• Warm spots or hot spots appearing unexpectedly on the door 
• Fault codes or error messages related to door closure
• Inability to run cooking cycles safely if the door can open

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.