General Electric Range / Cooktop / Oven Heating Element

This broil heater assembly replaces a failed upper-oven broil element to restore top-heat cooking and browning. It fits many GE ovens and provides a direct-replacement heating element for broiling performance. What it does

• Heats the top of the oven cavity for broiling, broil-browning, and crisping finishes
• Restores proper broil function when the element is visibly burned, broken, or not heating
• Works with the oven's broil control to reach required temperatures for short, high-heat cycles
• Helps eliminate uneven browning caused by partial or intermittent element failure

• One broil heater assembly

• Disconnect power to the range/oven at the breaker before starting any repair
• Access typically requires removing the oven back panel or interior broil access screws; keep track of fasteners
• Avoid contact with the element until fully cool; wear gloves and eye protection as needed
• Verify the part number on the oven tag and compare the old element to this assembly before installation

This bake element heats the oven cavity so food cooks evenly on bake settings. It replaces a failed or damaged element to restore proper baking performance and clear heating issues. What it does:

• Heats the bottom of the oven for bake cycles
• Replaces elements that are broken, visibly burnt, or not producing heat
• Helps resolve uneven cooking, no-heat on bake, or error codes related to open elements
• Works with matched oven control settings to maintain set temperatures

• One bake/heating element

• Disconnect power to the appliance before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Verify electrical connections are tight and secure; replace mounting screws if worn

This broil unit is the upper-oven heating assembly that provides direct high heat for broiling, browning and finishing dishes. Replaces a worn or failed broil element to restore proper broil performance. What it does:

• Produces the direct radiant heat used for broiling and browning food
• Replaces a visibly burnt, broken, or non-heating broil element
• Helps correct uneven browning or lack of upper-oven heat during broil cycles
• Works as the main heat source for the oven's broil function

• One broil unit assembly

• Disconnect power to the appliance at the breaker or unplug before servicing
• Allow the oven to cool completely; use gloves to protect hands from sharp edges
• Remove oven racks and access panel as required to reach the broil element
• Verify proper operation after installation

Note: 6" surface element

The Surface Dual Radiant Element 9" is an OEM part for GE electric ranges. This element is responsible for heating cooking vessels placed directly on the glass cooktop surface.

Causes of a bad element can include burns or damage from accidental contact with metal utensils, prolonged exposure to high heat, or failure of the electrical mechanism over time.

Symptoms of a bad element include:

• Slow or inconsistent heating
• Element not heating at all
• Burn or crack marks visible on the glass surface
• Buzzing or popping noises coming from below the cooktop

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This broil shield is the oven's rear cavity panel that protects the oven back and nearby components from direct broiler heat. It helps channel heat for safer broiling and prevents heat damage to internal parts. What it does:

• Deflects direct broiler heat away from the oven back wall and components
• Helps maintain proper broiling performance by directing heat toward food
• Reduces risk of heat-related damage, discoloration, or premature wear on internal oven parts
• Limits grease and debris contact with sensitive rear components

• Disconnect power (and gas supply on gas ovens) before servicing the oven
• Remove oven racks and, if required, the broil element to access the shield
• Handle edges carefully—metal parts can be sharp
• Keep hardware removed during disassembly; screw locations for reassembly

This hidden bake element provides the oven's primary lower heating source for baking and roasting. It restores consistent bake heat and is a direct-replacement part used in many GE electric ranges and wall ovens. What it does:

• Heats the oven cavity from the bottom for baking and roasting cycles
• Replaces a burnt-out or non-heating lower element to restore oven temperature
• Helps improve evenness of baking when the original element no longer reaches set temperature
• Commonly used when the oven won't bake or the lower area doesn't get hot

• One hidden bake heating element

• Disconnect power at the breaker or appliance plug before starting any work
• Allow the oven to cool completely and remove oven racks before accessing the element
• Element typically secures with mounting screws and two electrical terminals; support the element while removing/replacing to avoid stress on wires
• After installation, restore power and run a short bake cycle to verify operation

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

Replacement bake element for the lower oven. It supplies the primary heat during Bake cycles so your range can reach and hold the set temperature, restoring consistent, even baking performance when the original element fails.

• Generates the lower-oven heat during Bake cycles
• Helps the oven reach and maintain the set temperature
• Common symptoms: no heat in Bake, won't reach temperature, uneven baking, or a visibly cracked/blistered element

• Disconnect power at the breaker or unplug the appliance before servicing
• Remove oven racks, take out the element's mounting screws, and gently pull the element forward to access wires
• Transfer one wire at a time to the new element; prevent wires from slipping back into the oven wall
• Reinstall screws, ensure firm connections, restore power, and test Bake