General Electric Range / Cooktop / Oven Touch Pad

The Wall Oven Faceplate is an OEM component for GE wall ovens. It provides the outer facade and aesthetic front panel for the oven. The faceplate is responsible for protecting internal components while allowing easy access to the oven cavity. 

Causes of a bad faceplate can include damage from impacts or repeated cleaning/scrubbing. Long-term wear and exposure to heat in the kitchen environment can cause discoloration or cracking of cheaper material faceplates over time.

Symptoms of a bad wall oven faceplate include:

• Cracks, chips, or broken areas in the material
• Looseness or inability to securely mount onto the oven 
• Gaps that allow visibility into or access to internal workings
• Issues opening or closing the oven door due to alignment problems

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: White

The Clock Plate is an OEM part for GE ranges. This part covers and protects the clock and timer mechanisms, providing a clean and organized appearance to the appliance's control panel.

Causes of a bad clock plate can include physical damage such as cracks or breaks, discoloration from heat exposure, or wear and tear from regular use.

Symptoms of a bad clock plate include:

• Cracks or visible damage
• Discoloration or yellowing
• Difficulty reading the clock or timer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This black clock plate is the trim and mounting plate for the range or wall oven clock/timer in the control panel/backguard. It restores a clean, finished look and helps position and support the clock assembly securely.

• Provides the mounting surface and finished opening for the clock/timer module
• Helps align the display and protect surrounding panel edges
• Replace if cracked, warped, missing, or heavily discolored
• Typical symptoms include a loose or misaligned clock, rattling, or visible damage around the display

• Disconnect power at the breaker before servicing; allow the appliance to cool
• Remove the control panel/backguard to access the clock and plate
• Transfer the clock/timer to the new plate and reuse existing hardware
• Align carefully and avoid overtightening to prevent damage; verify display alignment before reassembly

This keypanel support assembly is the front frame that holds the touch keypad and related controls on your range or wall oven. Replacing a cracked or warped support restores a secure mounting surface and proper alignment of the user interface.

• Supports and positions the keypad/overlay and display opening within the control panel
• Provides mounting points for control electronics and trim pieces
• Restores proper alignment so buttons sit flush and operate as intended
• Common signs include a cracked front frame, loose or shifting keypad, or difficulty fastening the control panel

• Disconnect power at the breaker and allow the appliance to cool before servicing
• Remove control-panel screws/trim and place the panel face-down on a protected surface
• Transfer the keypad/overlay and any brackets from the old support to the new one; avoid creasing ribbon cables
• If handling the control board, use ESD precautions; verify color and fit before tightening fasteners

This replacement control panel and mounting bracket assembly restores a secure, like-new stainless front to the appliance's control area, providing proper support for the user interface components and a clean, factory appearance after dents, cracks, or corrosion. What it does:

• Provides the structural fascia and support for the control area
• Restores proper alignment for buttons/knobs and display openings
• Replaces dented, cracked, or bent panel/bracket components
• Helps eliminate flexing or wobble when using the controls

• One stainless steel control panel and mounting bracket assembly

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Transfer existing control components and hardware from the old assembly to the new one
• Photograph fastener locations and wiring before removal; align panel before final tightening

This control panel assembly replaces the front user-interface panel, restoring a secure, clearly labeled surface for operating your appliance. Install a new panel when the original is cracked, loose, or the control markings have become worn or unreadable. What it does:

• Provides the user-facing interface area for selecting functions and settings
• Houses and aligns buttons/switches and other control components
• Shields the control area from heat, spills, and impact
• Common symptoms: cracked or warped panel, worn/peeling graphics, loose or broken mounting points, sticky or misaligned buttons

• 1 control panel assembly

• Disconnect power at the breaker before servicing.
• Remove knobs/trim and the screws securing the existing panel; carefully lift it away.
• Transfer any reusable parts from the old panel to the new panel.
• Reinstall fasteners and trim, restore power, and test all controls.

This faceplate is the outer trim for the appliance control area, restoring a clean, finished look and protecting the buttons and display from spills, dirt, and everyday wear. It helps keep controls readable and usable. What it does:

• Covers and protects the control buttons, display and internal control components from moisture, grease and debris.
• Secures the control area trim and provides mounting points for switches or touchpads.
• Common symptoms: cracked, chipped or warped trim; loose or missing faceplate; visible damage around the control area.
• Restoring a damaged faceplate improves appearance and helps prevent further damage to underlying controls.

• Always disconnect power to the appliance before beginning any repair to avoid shock or injury.
• Removal typically requires opening the control panel; keep screws and fasteners organized for reassembly.
• Handle the faceplate carefully to avoid scratching or cracking; inspect mounting clips and replace if worn.

Color: White

This control panel assembly replaces the oven console user interface so you can restore the range's buttons, display and touch controls for normal cooking operation. It fits into the front console and provides the main input/display surface for oven functions. What it does:

• Houses the push buttons/touch controls and display used to set bake, broil, timers and clock
• Restores responsive control if buttons are cracked, stuck, or the display is obscured
• Provides mounting and electrical connection for the console electronics
• Helps clear user-interface related errors when the physical panel or buttons are damaged

• One control panel assembly

• Disconnect power at the breaker or unplug the appliance before starting.
• Handle the panel and display area carefully to avoid cracking glass or scratching surfaces.
• Keep all mounting hardware; electrical connectors are fully seated during reassembly.
• Test functions after reconnecting power before completing reassembly.

This control panel overlay is the printed decal that covers the front of the appliance's control console, restoring legible button labels and a clean appearance for easier operation. What it does:

• Replaces worn, faded, or scratched button graphics so settings and icons are visible
• Restores the control surface look for a like-new appearance
• Helps prevent user confusion from illegible or missing labels
• Maintains original button alignment and cutouts for proper access

• Disconnect power to the appliance before beginning any work.
• Remove the console or trim per the appliance instructions to access the old overlay; typically held with screws or clips.
• Peel off the old overlay, clean the surface with a mild, non-abrasive cleaner, then align and apply the new overlay smoothly.
• If adhesive backing is present, press firmly to ensure full contact; avoid harsh solvents or heat during installation.

This control panel assembly replaces a damaged or unresponsive console to restore your appliance's front-user controls and button feedback. It provides the interface that sends user commands to the appliance's control electronics. What it does:

• Houses the front buttons/touch pads and status indicators used to select cycles and settings
• Transmits user inputs to the main control so the unit will start and change settings
• Commonly replaces panels that are cracked, worn, or have non-responsive buttons
• Can resolve issues where button presses do not register or the control surface is cosmetically damaged

• Control panel assembly (1)

• Disconnect power before beginning service to avoid shock or damage
• Replace with the exact part number shown on the old panel; handle the assembly carefully to avoid scratching or bending
• Minor disassembly of the top/front trim and electrical connector removal are typically required; reinstall all fasteners and connectors securely

This control panel assembly replaces the oven's electronic console to restore keypad input and display functions, letting you set cook times, temperatures and modes from the front console. What it does:

• Houses the touchpads/buttons and display used to control oven functions
• Sends user commands to the oven control board so settings are registered
• Commonly replaced for unresponsive buttons, blank or garbled display, or cracked/damaged front panel
• Restores normal front-panel operation without replacing the main control board

• One control panel assembly (electronic console) as shown

• Disconnect power to the appliance at the breaker before starting work
• Handle the assembly carefully to avoid damaging the display, ribbon cables or connectors
• Basic hand tools typically required; some disassembly of the outer door/console may be needed