General Electric Washer Dispenser Parts

The Fabric Softener Dispenser is an OEM replacement part for GE washers. It is located on the top of the agitator. This dispenser allows for easy addition of fabric softener or other washing aids at the ideal time in the cycle. With a simple twist and pour into the reservoir, it then evenly releases the solution to condition clothes during the final rinse.

Causes of a bad dispenser can include cracks or leaks allowing premature discharge into the wash drum. Mineral buildup may also clog the release nozzles.

Symptoms of a bad dispenser include:

• Fabric softener not fully dispensing or splashing outside the dispenser cup
• Stains or residue transferring onto clothes from residues
• Strong chemical smells if the contents extra release early

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This liquid detergent insert fits into the washer's dispenser to meter and release liquid detergent at the correct time. Replacing a missing or damaged insert helps prevent early drain-off and supports consistent cleaning performance.

• Adapts the main detergent compartment for use with liquid detergent
• Helps control flow so detergent releases during the wash cycle, not immediately
• Promotes proper dispensing and reduces residue left in the dispenser
• Common clues it's needed: insert missing/broken, liquid runs straight into the tub, or detergent remains in the cup after a cycle

• Disconnect power to the washer before servicing
• Pull out the dispenser, then lift out the old insert
• Align and press the new insert into the detergent compartment until fully seated (follow any "LIQUID"/fill marks)
• Run a quick test cycle to ensure proper dispensing

This drawer dispenser assembly replaces a damaged or worn dispenser drawer to restore secure containment and reliable dispensing in your appliance. It helps keep detergents or dispensing components properly housed and prevents leaks or jams. What it does:

• Holds the appliance's dispenser drawer securely in place during use
• Guides and releases detergent or dispensing materials as designed
• Stops leaks or drips caused by cracked, warped, or broken drawer parts
• Prevents binding or sticking of the dispenser drawer for smooth operation

• Disconnect power and water before beginning any repair
• Remove the drawer or access panel per the appliance service instructions before installing
• Handle plastic components carefully to avoid cracking; use appropriate tools and gentle force

The Liquid Detergent Insert is an OEM part for GE washing machines. It is a small but important compartment that holds and dispenses precisely dosed amounts of liquid detergent during cycles. Located inside the detergent dispenser drawer, the liquid insert helps ensure the correct concentration of detergent is released. 

Causes of a bad liquid detergent insert can include cracked or broken plastic from repeated use, hardened plastic that no longer flexes properly to release detergent or damage to dispenser shutter mechanisms that control flow.

Symptoms of a bad liquid detergent insert include:

• Improper or uneven dispensing of detergent into the wash  
• Over or under-sudsing due to too much or too little detergent
• Residual detergent left in the insert compartment
• Reduced cleaning ability due to incorrect dosing

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This replacement bleach dispenser insert fits into the washer's bleach drawer to hold and release liquid bleach during the wash cycle, helping ensure proper dilution and safer delivery to the drum. What it does:

• Holds liquid bleach in the dispenser so it releases at the correct point in the cycle
• Directs bleach into the wash water to reduce concentrated contact with fabrics
• Prevents bleach from pooling or spilling inside the drawer
• Helps avoid uneven bleaching and fabric spotting when functioning correctly

• Disconnect power to the appliance before servicing
• Remove the dispenser drawer per the washer's service instructions, then lift out the old insert and snap the new insert into place
• Handle bleach residue with gloves and rinse parts thoroughly after installation
• Replace the whole dispenser assembly if the dispenser assembly is cracked or the insert won't seat properly

This drawer dispenser assembly replaces a damaged or worn dispenser drawer in the refrigerator door, restoring proper dispensing and a clean appearance. It fits into the dispenser housing to hold and route water/ice dispensing components. What it does:

• Replaces a cracked, warped, or broken dispenser drawer that can impede dispensing or leak
• Restores proper alignment so the dispenser flap and nozzles operate smoothly
• Helps stop visible leaks or drips coming from the drawer area
• Improves appearance where the drawer is scratched, discolored, or damaged

• Disconnect power to the appliance before beginning work to reduce shock risk
• Remove the old drawer by sliding it out and releasing any retaining clips or screws as required
• Inspect surrounding seals and retainers for damage; replace if necessary
• Use common hand tools

This bleach dispenser box is the plastic reservoir that holds and directs liquid bleach into the washer during the wash cycle, helping the machine deliver bleach safely and evenly. Fits select GE top-load washers. What it does:

• Holds liquid bleach until the washer adds it at the correct time
• Directs bleach into the wash tub to prevent concentrated bleach contact with clothes
• Helps prevent leaks from the dispenser area when functioning properly
• Common symptom: cracked or warped box causing leaks or bleach not dispensing

• 1 bleach dispenser box

• Turn off power and shut off water supply before starting work
• Replace only with the exact part to ensure proper fit and sealing
• Inspect surrounding gaskets and hoses; replace if damaged to avoid leaks

This detergent dispenser is the replacement cup assembly that holds and releases detergent during the wash cycle, restoring proper detergent delivery for clean dishes. Its white finish matches the original appearance. What it does:

• Holds detergent securely until the correct wash phase
• Releases detergent at the right time for effective cleaning
• Replaces a cracked, warped, or non-latching dispenser cup
• Helps resolve issues like detergent not dispensing or leftover residue

• One white detergent dispenser assembly

• Disconnect power and water to the appliance before servicing
• Remove the door inner panel or access panel as required for your model
• Replace the dispenser using common household tools; keep fasteners and clips from the old part