General Electric Washer Motor

This part is a genuine OEM replacement motor and inverter board assembly. It is intended to replace a broken or faulty motor and inverter in various washing machine models.This part works to ensure that the washing machine's basket rotates and agitates when the appropriate settings are selected. It the motor and inverter are broken, the washing machine may not work properly or may work less powerfully than intended. This can cause clothes and materials to come out still dirty, thus this part will need to be replaced. This particular assembly includes the inverter board as well as the motor, which controls the speed and direction of the basket. Wear gloves when working on any appliance repairs to prevent injury.This part has been made by General Electric and has been sourced directly from the manufacturer. It is made out of high-quality, durable, non-corrosive materials to ensure high quality and is sold individually. It is compatible with washing machine models that have been manufactured by General Electric, Hotpoint, RCA and various other brands.

This 2-speed clutchless motor replaces the washer's drive motor to restore agitation and spin without a mechanical clutch. It provides the two common drive speeds used for agitate and spin cycles on compatible top-load washers. What it does:

• Turns the washer tub/agitation mechanism to enable agitate and spin functions
• Operates at two speeds (agitate and spin) using an internal clutchless design
• Commonly used when a washer hums, runs but won't agitate or spin, or fails to change between agitate and spin
• Works with the existing mounting bracket and wiring harness on compatible models

• Disconnect power before servicing to avoid shock or injury
• Motor is heavy and may require lifting assistance; support the tub during removal/installation
• Reuse the existing mounting hardware and wiring harness
• Follow the washer's service manual for disassembly, torque, and wiring routing; test operation before reassembling the cabinet

Single-speed PSC motor that restores rotational drive to the appliance. Replaces a worn or failing motor to stop humming, no-spin or intermittent operation and helps return steady rotation when the rest of the drive system is serviceable. What it does:

• Converts electrical power into mechanical rotation to drive the appliance's rotating components.
• Common signs a motor needs replacement: humming, no rotation, slow or intermittent rotation, or unusual motor smells.
• Replaces a failed motor to restore normal, consistent rotation when the motor is the root cause.
• Designed for direct replacement where the same mounting and wiring are used.

• Always disconnect power to the appliance before beginning service.
• Follow the appliance service manual and wiring diagrams; label or photograph connections before removal.
• Support drum/assembly as required when removing or installing the motor; avoid strain on wiring.

This motor assembly kit replaces a worn or failed motor to restore proper mechanical drive and motion in the appliance. It's a direct-fit replacement designed to match the original assembly's form and function. What it does:

• Replaces the appliance's motor assembly to restore spinning, stirring, or drive motion
• Stops symptoms like no movement, intermittent operation, or unusual humming from the motor area
• Restores correct mechanical linkage between the motor and driven components
• Matches OEM fit and mounting points to simplify replacement

• One motor assembly kit (single complete motor assembly)

• Turn off power to the appliance at the breaker or unplug before beginning any repair
• Follow OEM disassembly steps to access the motor area; keep fasteners and small parts organized
• Handle electrical connectors carefully; wiring matches diagrams before re-energizing

This motor inverter is the electronic drive assembly that controls motor speed and torque, restoring proper motor operation and drive control for compatible appliances. It replaces the inverter electronics that govern motor performance. What it does:

• Regulates motor speed and direction to enable normal appliance drive functions
• Helps resolve intermittent motor operation, failure to start, or loss of drive control
• Restores electronic control of motor torque for cycles that require variable speed
• Clears symptoms related to erratic motor performance or inverter-related error codes

• Disconnect power to the appliance before starting any repair
• Handle the assembly carefully; avoid ESD (electrostatic discharge) to electronic components
• Install with matching part number; secure all connectors and mounting points

This electronic inverter motor assembly controls variable motor speed for compatible appliances, restoring smooth, efficient drive performance. Replaces a worn or failed inverter module to help resolve intermittent motor operation and speed-control issues. What it does:

• Converts control signals into variable motor speed for precise operation
• Restores consistent motor startup and RPM regulation
• Helps address symptoms like irregular motor speeds, intermittent runs, or error codes related to motor drive
• Works as the appliance's electronic drive interface between the control board and motor

• Disconnect power before servicing to avoid shock or injury
• Handle the module and connectors carefully to prevent ESD or damage
• Basic hand tools are typically required; follow the appliance service manual for access and mounting

This motor assembly kit replaces the dryer's drive motor so the drum turns smoothly and reliably. Restores normal tumbling and helps stop motor noise or a drum that won't rotate. What it does:

• Powers the dryer drum so clothes tumble during operation
• Replaces worn or seized motors that cause the drum to stop turning
• Stops loud grinding, squealing, or humming noises from the motor area
• Helps eliminate intermittent starting or unresponsive drum rotation

• Disconnect power before beginning any repair to avoid shock or injury
• Basic installation involves removing the dryer front or rear panel, disconnecting wiring harnesses, and replacing the motor assembly
• Check belts, idler pulley, and drum support rollers while servicing; replace if worn

This 1-speed dryer motor drives the drum and blower to circulate air and tumble clothes for drying. It replaces a failed motor to restore normal drum rotation and airflow in compatible dryers. What it does:

• Spins the drum and powers the blower to move air through the drum and venting.
• Starts and maintains consistent tumble speed for even drying.
• Can resolve symptoms such as no drum rotation, a humming motor, intermittent spinning, or burning/motor smell.
• Works with the dryer's clutch or idler assembly when applicable.

• Disconnect power at the breaker or cord before starting any repair.
• Access typically requires removing the dryer front or back panel and disconnecting wiring harnesses; keep screws and fasteners organized.
• Inspect and replace any worn belt, idler, or clutch parts while the unit is open to prevent repeat failures.
• If you smell burning or see damaged wiring, stop and address electrical concerns before reinstalling the motor.

This motor assembly with integrated clutch replaces the dryer's drive motor to restore drum rotation and normal tumbling. It's the direct-fit drive unit used to move the dryer drum and enable reliable drying performance. What it does:

• Turns the dryer drum so clothes tumble and dry evenly.
• Clutch helps control drum start/stop and prevents backward spinning.
• Commonly replaces a worn motor or failed clutch causing no tumbling.
• Stops grinding or squealing noises if the clutch or motor bearings are failing.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Wear gloves and eye protection; follow the dryer service manual for disassembly steps.
• Reinstall drum belt and alignment per factory instructions; mounting hardware is secure.
• After installation, test with a short cycle to ensure proper drum rotation and noise-free operation.

This induction motor assembly powers the mechanical drive in compatible laundry appliances, restoring rotation for tumbling or airflow so the appliance can resume normal operation. Designed to replace a worn or failed motor quickly. What it does:

• Drives the appliance's mechanical components to enable drum tumbling or blower rotation
• Stops functioning when the motor is worn, causing no tumble, humming, or intermittent operation
• Restores reliable rotation when the original motor has seized, failed to start, or runs inconsistently
• Works as the direct replacement motor specified for the listed part number

• Disconnect power before beginning any repair to avoid shock or injury
• Installation may require basic hand tools and removal of access panels
• Inspect wiring and mounts for damage and replace any worn fasteners or wire connectors