General Electric Washer Hose Or Tube

The Drain Hose is an OEM part for GE washing machines. It plays a crucial role in expelling used water from the washer to the household drainage system. If you need to replace the drain hose clip as well, order part number WH16X513.

Causes of a bad Drain Hose can include physical damage such as splits or holes, clogging from lint and debris, or deterioration due to age and frequent exposure to water and detergents.

Symptoms of a bad Drain Hose include:

• Water leaking from the back or underneath the washing machine,
• Slow or incomplete drainage during or after the wash cycle,
• Visible signs of wear or damage on the hose.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pressure Switch Hose is an OEM part for GE washing machines. It connects the pressure switch to the tub, allowing the switch to monitor the water level within the washing machine. This ensures the proper amount of water is used during each cycle for efficient washing and rinsing.

You should replace this pressure switch hose if it becomes cracked, clogged, or otherwise damaged. Common causes of a bad hose include wear and tear from repeated use, buildup of detergent or debris, and damage from improper handling or installation.

Symptoms of a bad pressure switch hose include:

• Washing machine not filling with water
• Overfilling or underfilling of the tub
• Inaccurate water level detection
• Error codes related to water level issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Inlet Hose is an OEM part for GE washing machines. This hose plays a crucial role in the laundry process, ensuring that used water is efficiently removed from the washer, which helps in preventing standing water, odors, and potential mold growth inside the appliance.  

Causes for issues with the drain pump inlet hose often involve natural wear and tear from constant exposure to water and laundry chemicals, physical damage from overloading or moving the washer, or blockages from lint, small garments, or other debris.

Symptoms of a malfunctioning Drain Pump Inlet Hose include:

• Water leaking from the bottom or back of the washing machine
• Slower than normal drain times, indicating possible clogs
• Visible wear, cracks, or damage to the hose

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Fill Spout is an OEM replacement part for GE washing machines. It guides water from the inlet valve to the wash tub for a controlled flow. The fill spout is designed to reduce splashing and ensure that water is evenly distributed within the washing machine.

A bad Water Inlet Fill Spout can be due to cracks or damage from material wear, blockages caused by debris or mineral buildup, or issues with its connection to the inlet valve. 

Symptoms of a malfunctioning Water Inlet Fill Spout include:

• Water splashing or leaking during the fill cycle
• Inefficient filling of the washing machine
• Visible damage or cracks in the spout
• Restricted water flow into the wash tub

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

This washer drain hose carries used water from the tub to your home drain. Replacing a cracked, clogged, or kinked hose helps restore proper draining and prevents leaks during the drain/spin portion of the cycle.

• Routes wastewater from the washer to the household standpipe or laundry sink
• Damage or blockage can cause leaks, slow or no draining, or water on the floor
• Replace if you see cracks, splits, bulges, or persistent leaking at the back of the washer
• A pinched or flattened hose can also lead to standing water after a cycle

• Unplug the washer and turn off water; place towels or a pan to catch residual water
• Note the routing; loosen clamps and remove the old hose from the washer outlet and drain connection
• Install the new hose and secure with clamps; avoid kinks or sharp bends
• Verify correct drain height/air gap to prevent siphoning, then run a drain/spin to check for leaks

The drain pump hose assembly is an OEM part for GE washers. This assembly includes the drain hose, clamp, and connector, providing a complete installation for efficiently draining water from your GE washer. It is designed to withstand the water flow and pressure, providing a reliable connection between your washer and the drainage system to prevent water leaks or spills in your laundry area.

A bad drain hose assembly can occur due to wear and tear, clogs, or damage to the hose or connectors. If you notice symptoms such as water leaks, slow or incomplete drainage, or visible cracks or leaks in the hose, it may be time to replace the assembly.

Symptoms of a bad drain hose assembly include:

• Water leaks during the wash or spin cycles
• Slow or incomplete drainage
• Visible cracks or leaks in the hose or connectors

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This drain hose directs wastewater away from the appliance to the household drain, helping prevent standing water and poor drainage. Durable, flexible construction lets you route the hose for a secure connection. What it does:

• Carries wastewater from the appliance pump to the household drain or garbage disposal
• Restores proper draining when the existing hose is cracked, split, or clogged
• Helps prevent leaks and water pooling caused by damaged or collapsed hoses
• Allows proper routing to avoid kinks that can restrict flow

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect hose clamps and connections; replace clamps if corroded or loose
• Route the hose without sharp bends or kinks and secure per the appliance's routing path

This pressure switch hose connects the washer tub to the pressure/air switch so the machine can detect water level accurately. Replacing a cracked or clogged hose restores reliable level sensing and reduces false error codes. What it does:

• Carries air pressure from the tub to the pressure/air switch so the control can sense fill level
• Prevents false water-level readings caused by cracks, clogs, or leaks in the hose
• Helps stop overfilling, underfilling, excessive agitation, or frequent cycle interruptions
• Works with the washer's pressure/air switch assembly to maintain proper cycle operation

• Disconnect power and turn off the water supply before starting any repair
• Install hose to same routing and fittings; ensure tight, secure connections at both ends
• Avoid kinks, sharp bends, or pinches that can block air flow or cause leaks
• After installation, run a test fill/drain cycle to confirm correct operation and no leaks

This inlet hose connects the household water supply to the appliance's steam generator, allowing steam cycles to produce moisture for cleaning or sanitizing. Replacing a damaged inlet restores proper water flow to the steam system. What it does

• Channels incoming water to the steam generator assembly so the unit can produce steam.
• Stops steam or steam-cycle operation when cracked, pinched, or leaking.
• A leaking or split inlet hose can cause visible water under or behind the appliance.
• Faulty inlet hose may trigger steam-related fault/error indications or interrupted steam cycles.

• One hose inlet for the steam generator assembly.

• Turn off water supply and disconnect power before servicing.
• Inspect and replace any worn seals or O-rings; ensure fittings are seated and tightened to OEM torque specs.
• Use only the exact replacement part number to ensure proper fit and function.