Need Help?
Call or text
This starter rope is designed for use with several lawn and garden tools, including as hedge trimmers. It is wrapped around the starter pulley and can be manually pulled on to get the engine to start up. After wear and tear or a lot of use, the rope can start to fray and weaken. Given more time, the starter rope will completely break and no longer be useable. Many people will realize the starter rope is broken when pulling on it and receiving a line of rope in their hands. If the starter rope is broken, it needs to be replaced. First, the spark plug needs to be removed to prevent the engine from powering on. Next, the starter rope can be removed from the guide. The engine cover and fuel tank will need to be removed, as well as the dipstick tube and blower housing. Next, the recoil spring should be rewound before threading the new rope into the pulley. This is an individual genuine OEM component that comes directly from the manufacturer for the highest quality. It can be used with Echo, Little Wonder, and Shindaiwa trimmers, chipper shredders, leaf blowers, and hedge trimmers. A replacement will require basic tools like screwdrivers and a socket wrench.
Usually ships within 4 - 14 days
This is a starter grip that is used on many different types of lawn and garden equipment. The starter is the part that engages the pull rope when the user yanks on it. This causes the engine to turn quickly enough for the ignition module to make a spark. This spark is used to ignite the gasoline in the cylinder. The starter grip is made of durable plastic but can become damaged, broken, or lost. The starter grip has an important function in starting the tool while also being comfortable to use.If the starter grip needs to be replaced, a socket wrench and a screwdriver will be required. Put the tool on a flat surface and remove the spark plug wire before making the replacement. Disassemble the tool to reach the starter assembly so the grip can be removed. Replace the grip and reassemble the parts.This starter grip is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The starter grip has been designed to fit tillers, edgers, string trimmers, hedge trimmers, and leaf blowers manufactured by Mantis, Little Wonder, and Echo.
This is a carburetor rebuild kit that is made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.
This is a genuine throttle trigger replacement designed for use with select tillers. The throttle trigger attaches to the throttle control at the handle and is what is used to power the machine. When the trigger is squeezed, the throttle cable will engage the engine and the tiller will begin to work. Releasing the trigger will stop the machine from running. This is a plastic piece and it is exposed to repetitive motion and the outdoor elements, which means that it can break over time even with regular use. A replacement will be necessary to use the tiller. This genuine OEM throttle trigger is manufactured and designed for Mantis tillers and cultivators that feature the old-style throttle control. It fits dozens of models from Echo and Mantis. It is made of durable plastic and sold as an individual unit. No hardware, cables, or other components are included with this purchase. Replacing the throttle control is a quick job that requires only a couple of tools and shouldn't take more than a few minutes. Be sure to disengage the spark plug or otherwise disconnect power to the engine for safety before working on any part of the throttle system.
A lever spring is a part of a trimer or tiller that works with the lockout lever. The lockout lever needs to be depressed before the throttle can activate. The return spring is responsible for offering tension so the lockout lever works the way it should.
This OEM choke rod replacement is designed for use with select trimmer/edger models. The choke rod is installed on the unit to provide the user with access to the choke, allowing them to control the speed and fuel flow to the engine. The choke controls the engine speed and performance by restricting the flow of air to the carburetor to improve the air-fuel mixture for better performance in lower temperatures. Over time, the choke rod can become worn or it may be damaged due to impact. In either situation, a proper replacement with a part like this is necessary. This choke rod is manufactured by Echo and designed to work with a number of models from this brand and Little Wonder. There are dozens of compatible units that can take this part. The choke rod consists of the metal rod and the plastic handle and is a fairly easy part to replace. Be sure to disengage the spark plug and disconnect any power to the engine before replacing the choke rod or other engine components. This is sold as a single unit and does not include any hardware or additional parts.
The choke shutter is a trimmer part that restricts the amount of air that flows into the engine. The choke shutter rests inside the carburetor, and is designed to help with the mixture of air and fuel that causes the combustion that starts the engine.If the choke shutter is not opening or closing properly, then the engine will not be able to start. The carburetor's temperature allows the engine to run, and in order to control the temperature, you will need a working choke valve. To install a new choke shutter, start by opening the carburetor inside of the trimmer's engine. This part can be replaced with a screwdriver or bolt extractor depending on what is holding the carburetor together. The choke shutter can then be replaced and tested to make sure it opens and closes properly. This genuine OEM choke shutter is durable and easy to install. It is made from durable metal and is sold individually.
Combustion engines use carburetors to manage the amount of air and fuel entering the chamber. However, to start some combustion engines, a choke is required. This part regulates the air pressure within the intake manifold. This effectively adjustes the air and fuel levels entering the engine, and allows more fuel to reach the inside to ensure that it starts easily. The choke valve is then opened as the machine runs. The choke is installed through a grommet that ensures a good seal, but the grommet can wear out over time. This replacement choke grommet is designed for an array of small engine machines, including pruners, trimmers, saws, and edgers made by Little Wonder and Echo. This OEM replacement part is sold individually and is made of long lasting rubber. It does not include any other components in the assembly.
This is a rear handle set used on many models of hedge trimmers. The part includes both the right and left pieces of the handle. Any needed hardware or extra components will need to be purchased separately. The rear handle encloses the trigger switch. It also offers a comfortable gripping point for the hedge trimmer's operator. Through regular use or impact, the rear handle set can become damaged or broken and will require replacement.If the rear handle needs to be replaced, a screwdriver and wrench set will be needed. The screws should be removed from the rear handle assembly before separating the left and right sides. Each of the parts in the handle will need to be removed. Install them into the replacement rear handle before replacing the handle itself. Screw each of the handle sides in, and the trimmer will be ready for use.This rear handle set is sold as a single part. It is designed to be compatible with hedge trimmers manufactured by Echo and Shindaiwa. The rear handle is an authentic OEM replacement part that is directly sourced from the manufacturer.