Need Help?
Call
Usually ships within 4 - 14 days
This on/off switch turns power to the unit on and off. Not only does it help keep the machine running, but it ensures that the device can be powered down for safety when the job is done. A faulty on/off switch means that the equipment will not be able to be fired up and used until it is repaired. Making sure that things like power supplies and switches are in good working order will ensure safe operation. This switch includes the nut to secure it in place. This OEM on/off switch replacement is compatible with various Echo and Mantis equipment, including hedge trimmers, tillers, and other trimmers. This switch is made of durable metal components and is sold individually.
This genuine Echo ignition switch can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of an ignition switch in outdoor appliances is to turn on the engine by connecting to the spark plugs and firing them up in order to power the engine.An ignition switch can be worn down over time by overuse or exposure to the elements. An ignition switch can also be damaged by a direct impact collision that can warp the component. It may also suffer from corrosion to the metal or plastic material that can prevent it from sending voltage and creating a spark to power on the engine. If this form of damage occurs, the ignition switch should be removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition switch is compatible with the following brands: Echo and Shindaiwa.
A starter rope is wrapped around the recoil drum starter pulley. The starter spring creates tension for the rope to recoil. It is 2.25 inches in diameter on the outside of the pulley and 0.25 inches in diameter on the inside of the pulley. If the starter spring has gone bad, consider replacing the recoil drum starter pulley while repairing the other part. It may be that the damage of the starter spring has chipped the drum, or the drum may be worn from the friction of spinning as the rope uncoils and recoils. If the recoil drum starter pulley is damaged, it may not spin freely. This could prevent the engine from starting. The replacement of this part should be quick and easy and only requires a screwdriver and pliers to complete. The recoil drum starter pulley works with trimmers, hedge trimmers, pole saws and pruners, leaf blowers/vacuums, small engines, chipper shredders, edgers, tillers, and water pumps manufactured by Echo, Little Wonder, Mantis, and Shindaiwa brands. It is a genuine OEM part.
This starter rope is designed for use with several lawn and garden tools, including as hedge trimmers. It is wrapped around the starter pulley and can be manually pulled on to get the engine to start up. After wear and tear or a lot of use, the rope can start to fray and weaken. Given more time, the starter rope will completely break and no longer be useable. Many people will realize the starter rope is broken when pulling on it and receiving a line of rope in their hands. If the starter rope is broken, it needs to be replaced. First, the spark plug needs to be removed to prevent the engine from powering on. Next, the starter rope can be removed from the guide. The engine cover and fuel tank will need to be removed, as well as the dipstick tube and blower housing. Next, the recoil spring should be rewound before threading the new rope into the pulley. This is an individual genuine OEM component that comes directly from the manufacturer for the highest quality. It can be used with Echo, Little Wonder, and Shindaiwa trimmers, chipper shredders, leaf blowers, and hedge trimmers. A replacement will require basic tools like screwdrivers and a socket wrench.
This is a starter grip that is used on many different types of lawn and garden equipment. The starter is the part that engages the pull rope when the user yanks on it. This causes the engine to turn quickly enough for the ignition module to make a spark. This spark is used to ignite the gasoline in the cylinder. The starter grip is made of durable plastic but can become damaged, broken, or lost. The starter grip has an important function in starting the tool while also being comfortable to use.If the starter grip needs to be replaced, a socket wrench and a screwdriver will be required. Put the tool on a flat surface and remove the spark plug wire before making the replacement. Disassemble the tool to reach the starter assembly so the grip can be removed. Replace the grip and reassemble the parts.This starter grip is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The starter grip has been designed to fit tillers, edgers, string trimmers, hedge trimmers, and leaf blowers manufactured by Mantis, Little Wonder, and Echo.
This is a carburetor rebuild kit that is made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.
This is a genuine throttle trigger replacement designed for use with select tillers. The throttle trigger attaches to the throttle control at the handle and is what is used to power the machine. When the trigger is squeezed, the throttle cable will engage the engine and the tiller will begin to work. Releasing the trigger will stop the machine from running. This is a plastic piece and it is exposed to repetitive motion and the outdoor elements, which means that it can break over time even with regular use. A replacement will be necessary to use the tiller. This genuine OEM throttle trigger is manufactured and designed for Mantis tillers and cultivators that feature the old-style throttle control. It fits dozens of models from Echo and Mantis. It is made of durable plastic and sold as an individual unit. No hardware, cables, or other components are included with this purchase. Replacing the throttle control is a quick job that requires only a couple of tools and shouldn't take more than a few minutes. Be sure to disengage the spark plug or otherwise disconnect power to the engine for safety before working on any part of the throttle system.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.