Parts for Lg LFX29927ST/03: Ice Maker & Ice Bin Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This hinge bolt secures the hinge to the appliance cabinet or door, keeping alignment true and motion smooth. Replacing a stripped, missing, or corroded bolt helps restore proper door operation and reliable closing.

• Fastens the hinge to support and stabilize the door
• Helps maintain alignment for smooth opening and closing
• Replaces damaged, stripped, or missing hardware

• Disconnect power to the appliance; shut off water supply if applicable
• Support the door to prevent strain on remaining hardware; enlist a second person if needed
• Note the order/orientation of any shims or washers and transfer them during reassembly
• Start threads by hand to avoid cross-threading; tighten securely without overtightening

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This is a customized screw used to secure components in LG appliances. It replaces a worn or missing fastener to restore proper assembly and reduce rattling or loose panels. What it does:

• Secures panels, brackets, or small components in the appliance chassis
• Helps stop vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to restore safe, stable assembly
• Matches OEM fit for the specific mounting point it was made for

• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance-specific safety procedures before servicing

This replacement customized screw restores secure fastening for LG appliance panels and components. It provides a precise fit where the original screw was lost or damaged so parts stay properly aligned and rattle-free. What it does:

• Fastens panels, trim, brackets or small components to maintain proper alignment and fit
• Replaces missing or damaged screws that cause loose parts or vibration noise
• Helps prevent movement that can lead to wear or intermittent contact
• Matches the original mounting point so installation restores OEM fit

• Disconnect power and unplug the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; do not overtighten
• Keep removed hardware organized and compare to the new screw before final assembly

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This duct assembly channels exhaust air from the appliance to the external vent, helping maintain proper airflow and reduce moisture buildup. Replace a damaged or misaligned duct to restore safe, efficient venting. What it does:

• Directs exhaust air from the appliance to the vent outlet to support proper airflow
• Helps reduce backflow, moisture buildup, and lint bypass when properly sealed
• Fits multiple positions/configurations to accommodate different cabinet or wall locations
• Restores worn, torn, or crushed ducts that can restrict airflow or cause odors

• Disconnect power and unplug the appliance before beginning work; if gas-equipped, turn off the gas supply.
• Use appropriate clamps or screws and high-temperature foil tape where recommended.
• Inspect surrounding venting and replace any crushed or obstructed sections for best performance.

This replacement freezer tray holds and organizes frozen items inside the freezer compartment. Restore safe, stable storage and a proper fit when the original tray is cracked, warped, or missing.

• Provides a dedicated surface to store and organize frozen items
• Fits the designated location in the freezer to maintain proper spacing
• Replace if the tray is cracked, broken, warped, or missing
• If the tray no longer seats securely or items tip over, a new tray is needed

• Disconnect power to the refrigerator before servicing
• Remove food from the area and the damaged tray
• Allow plastic parts to warm slightly to reduce the risk of cracking
• Position the new tray fully into place and ensure it sits flat and secure

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This roller assembly supports and guides a sliding rack, shelf, or drawer so it rolls smoothly along its track. Replacing a worn roller restores easy, even movement and helps prevent sticking, wobbling, noise, or the rack/drawer jumping off the rail.

• Provides rolling support for a sliding component on its rail
• Maintains alignment to reduce binding and off-track jams
• Helps the rack/drawer glide quietly and evenly
• Common signs to replace: hard-to-slide movement, squeaking/grinding, wobble or tilt, or a cracked/missing wheel

• Disconnect power before servicing; shut off water supply if applicable to your appliance
• Remove the rack/drawer to access the roller; support moving parts while working
• Note roller orientation and re-use existing fasteners/clips as designed
• Replace both sides for even operation

The Freezer Tray Roller is an OEM part for LG refrigerators. It is a dual roller wheel assembly located at the rear wall of the freezer compartment. The roller aids sliding shelf movement by reducing friction between trays and the liner wall. 

Causes of a bad freezer tray roller include cracks, flat spots, or separated roller pieces from wear over years of use.

Symptoms of a bad tray roller are:

• Difficulty sliding shelves smoothly in and out of position
• Excessive force required to access stored items
• Noisy operation or rattling noises within the freezer

This genuine LG OEM replacement part is also compatible with some Kenmore models.

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This Drawer Tray Assembly forms the base/support for a refrigerator drawer. Replace a cracked or warped tray to restore proper fit, stable food storage, and smooth drawer operation.

• Provides a sturdy surface for the drawer and helps keep items contained and organized
• Restores correct seating and alignment so the drawer opens and closes smoothly
• Common failure signs: cracked or bowed tray, broken tabs, drawer wobble, or difficulty sliding

• Disconnect power and remove food from the affected drawer area
• Slide out the drawer; lift out the damaged tray and transfer any reusable trim or hardware from the original
• Seat the new tray fully and reinstall the drawer; do not force or overtighten any clips or screws

This Drawer Tray Assembly forms the base/support for a refrigerator drawer. Replace a cracked or warped tray to restore proper fit, stable food storage, and smooth drawer operation.

• Provides a sturdy surface for the drawer and helps keep items contained and organized
• Restores correct seating and alignment so the drawer opens and closes smoothly
• Common failure signs: cracked or bowed tray, broken tabs, drawer wobble, or difficulty sliding

• Disconnect power and remove food from the affected drawer area
• Slide out the drawer; lift out the damaged tray and transfer any reusable trim or hardware from the original
• Seat the new tray fully and reinstall the drawer; do not force or overtighten any clips or screws

This shelf assembly replaces a cracked, chipped, or sagging glass shelf to restore stable storage and organization inside the refrigerator. It provides a solid, easy-to-clean surface for food and containers. What it does:

• Supports refrigerated food, containers and produce to maximize usable shelf space
• Restores a level, stable surface when an existing shelf is damaged or warped
• Helps prevent spills by providing a full, even glass surface
• Matches OEM fit and sits into existing shelf supports to maintain original layout

• Remove all items from the shelf and surrounding area before installation
• Slide the old shelf out of its supports and carefully lift the replacement into place; support glass to avoid dropping
• Use caution handling glass; wear gloves to prevent cuts
• If shelf does not seat easily, check support rails for obstructions or damage;

The Crisper Glass is an OEM part for LG refrigerators. This glass panel sits on top of the crisper drawers, providing a clear view of the contents inside while supporting the items placed on top. It helps in maintaining the structural integrity of the crisper area and aids in the efficient organization of food items.

Causes of a bad crisper glass can include accidental dropping, heavy impact, or overloading the shelf beyond its weight capacity. A damaged crisper glass can compromise the safety and usability of the crisper drawers.

Symptoms of a bad crisper glass include:

• Cracks or chips in the glass
• The glass panel not fitting securely or evenly
• Difficulty in sliding the crisper drawers
• Potential risk of glass shards in the refrigerator

This OEM LG part is also compatible with Sears/Kenmore models.

This shelf assembly is a replacement ventilated storage shelf that restores organized, visible storage inside the refrigerator. It keeps lightweight items secure while allowing air circulation for consistent cooling. What it does:

• Provides a stable, ventilated surface for storing bottles, produce, and other items
• Replaces torn, sagging or missing net-style shelves that let items fall through
• Helps keep contents organized and easy to see and reach
• Maintains airflow compared with solid shelving, supporting even cooling

• Disconnect power or unplug the appliance before servicing
• Remove food and any items from the area before installing
• Typically installs by snapping into existing shelf rails or bracket slots; use only manufacturer-recommended fasteners
• If clips or mounting hardware are damaged, replace them to ensure a secure fit

Replacement tray assembly for the fresh room that supports the crisper/drawer and helps contain spills. Restores a stable storage surface to keep produce and deli items organized and the compartment easier to clean. What it does

• Supports the fresh room/crisper area and provides a flat surface for stored foods.
• Contains minor spills and drips to protect the interior below the drawer.
• Helps keep the crisper drawer aligned and sitting level.
• Common symptoms: cracked or broken tray, sagging or misaligned drawer, or visible leaks under the fresh room.

• Disconnect power and remove food before starting service.
• Remove the crisper/drawer to access the tray.
• Install by seating the tray into the drawer supports until it snaps or rests securely; replace drawer and test operation.
• Use gloves to protect hands from sharp edges and follow the refrigerator service manual for model-specific steps.

This tray cover assembly is the shelf cover that sits above a storage bin inside your refrigerator. It restores a flat, stable surface for food and proper support for the drawer area when the original is cracked, warped, or missing. What it does:

• Forms the shelf surface over a drawer/crisper and supports stored items
• Provides structure for the drawer area so bins slide and seat correctly
• Helps maintain proper airflow across the drawer compartment
• Common signs of failure: cracked or sagging frame, broken tabs, drawers binding or not closing smoothly

• 1 tray cover assembly

• Unplug the refrigerator and clear the shelf area before starting
• Remove the affected drawer(s) and any inserts from the old cover
• Position the new cover on the cabinet supports and ensure tabs/rails are fully seated
• Reinstall drawers and check for level, smooth operation

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore organized produce storage and easy access in your refrigerator. Durable replacement tray helps keep fruits and vegetables contained and accessible. What it does:

• Replaces a cracked, warped, or missing vegetable/crisper drawer
• Provides a dedicated storage area to keep produce separated from other shelves
• Restores proper fit and sliding function when the original tray no longer operates smoothly
• Helps prevent spills and makes cleaning easier by containing messes

• One vegetable tray assembly

• Remove all contents from the drawer area before beginning
• Slide out the old tray per your refrigerator's service instructions; no electrical disconnect required for most installations
• Inspect track/guides and clean before installing the new tray to ensure smooth operation

This vegetable tray assembly replaces a worn or cracked crisper insert to keep produce organized and stable inside the refrigerator. It restores the storage surface so fruits and vegetables sit flat and are easier to access. What it does:

• Provides a flat, removable surface for storing fruits and vegetables in the refrigerator crisper area
• Replaces cracked, warped or discolored trays that can trap moisture or cause items to tip
• Helps maintain organization so drawers close and slide properly
• Compatible with the refrigerator's existing drawer/frame to resume normal storage use

• One vegetable tray assembly

• Designed for user installation with basic hand tools; remove the crisper drawer to access the tray
• Inspect surrounding drawer rails and seals for wear while replacing the tray
• Handle carefully to avoid breakage; do not force parts into misaligned tracks
• Disconnect power only if working near electrical components or lighting; otherwise no electrical disconnection required

This Vegetable Tray Assembly replaces a damaged or cracked crisper drawer tray to restore a stable storage surface for fruits and vegetables. Keeps produce supported and helps maintain proper air flow inside the refrigerator. What it does:

• Replaces a broken, cracked, or warped crisper tray so drawers slide and store produce correctly
• Provides a flat, stable surface to prevent items from tipping or getting stuck
• Works with the refrigerator's crisper drawer to help keep humidity-controlled storage functioning normally
• Helps eliminate rattling or uneven drawer movement caused by a damaged tray

• One vegetable (crisper) tray assembly

• Designed for drop-in replacement; remove contents and pull out crisper drawer to access tray
• Inspect surrounding rails and mounting tabs for damage before installing replacement
• Handle carefully—plastic edges can be sharp and may crack if forced
• Unplug appliance or disconnect power before working near electrical components

The Drawer Cover Assembly is an OEM part for LG French door refrigerators featuring sliding drawer panels. This assembly covers the top edges of the internal crisper and deli drawers.  

Symptoms of a bad drawer cover assembly include:

• Gaps allowing moisture to drip onto contents below  
• Covers difficult or stiff to open and close accompanying drawers
• Cracks or punctures reducing the ability to protect items  
• Covers detaching from their fixed positions   

Causes of failure can be repeated use taking a toll on plastic through daily expansion and contraction, cracks developing from impacts over time, or general wear reducing insulation sealing capabilities.

Replace yours today with this genuine OEM LG assembly to maintain optimal organization and safeguard your stored items.  This replacement part is also compatible with GE and Samsung drawer-equipped refrigerators.

The Temperature Sensor is an OEM part for LG refrigerators. It monitors the internal temperature and sends this information to the control board, ensuring that the refrigerator maintains the correct temperature for optimal food preservation.

Over time, temperature sensors can fail due to electrical issues, exposure to moisture, or wear and tear from continuous use. 

Symptoms of a bad temperature sensor include:

• Inaccurate temperature readings
• The refrigerator or freezer being too warm or too cold
• The refrigerator running constantly or not running at all
• Error codes displayed on the control panel

This OEM LG part is also compatible with Sears/Kenmore models.

This guide assembly helps support and direct a sliding component within the appliance, ensuring smooth, stable movement and proper alignment for reliable operation.

• Provides a track/guide path for a moving tray or drawer
• Helps prevent binding, wobbling, or misalignment
• Can address issues like sticking, uneven travel, or jamming
• Maintains correct positioning for consistent performance

• Disconnect power and, if applicable, shut off water before servicing
• Remove the affected drawer/tray to access the guide area
• Transfer any reusable hardware from the original part if required
• Test movement and alignment after installation before reloading contents

This is a refrigerator drawer guide assembly that supports and guides a crisper/vegetable bin so it slides smoothly in and out. Replacing a worn guide restores proper drawer alignment and easy operation.

• Provides the track surface for the vegetable/crisper drawer
• Helps correct sticking, binding, or a sagging/misaligned drawer
• Can reduce scraping noises and uneven drawer movement
• Restores smooth sliding action after wear or damage

• Unplug the refrigerator before service
• Remove the affected drawer and any shelf above it for access
• Retain and transfer any screws or clips from the original guide
• Test drawer movement and alignment before closing up

This rail guide assembly supports and guides a sliding refrigerator drawer, helping it open and close smoothly. Replace a cracked or worn guide to restore proper alignment and prevent binding or the drawer jumping off its track.

• Provides the track and support for pantry/crisper/freezer drawer movement
• Keeps the drawer aligned to reduce wobble and uneven travel
• Restores smooth open/close when the guide is cracked or worn
• Helps the drawer seat fully for a proper fit

• Unplug the refrigerator before servicing
• Remove the bin/drawer from the compartment to access the guide
• Save and reuse existing mounting hardware and spacers
• Install the new guide, align the drawer, and verify smooth travel

This rail guide assembly supports and guides a sliding refrigerator drawer so it opens and closes smoothly. Replacing a worn guide can restore proper glide, alignment, and sealing for reliable everyday use.

• Mounts to the slide track to guide the pull-out drawer
• Keeps the drawer level and aligned during opening and closing
• Helps ensure the drawer closes fully for proper sealing
• Common symptoms: drawer binds or rubs, feels rough, won't close flush, or shows cracks/wear on the guide

• Disconnect power and remove the affected drawer/basket before starting
• Remove screws or release tabs to detach the old guide; note orientation
• Install the new guide and secure with existing hardware; ensure slides move freely
• Reinstall the drawer and verify smooth travel and full closure before restoring power

The Fresh Food Tray Rail is an OEM replacement part for LG refrigerators. It allows the right side of the fresh food tray to slide in and out. 

Causes of a bad fresh food tray rail can include warping, cracking, or bending from heavy shelf loads over time compromising its structural integrity.

Symptoms of a bad fresh food tray rail include:

• Sagging or sliding shelves that no longer fit securely  
• Gaps allowing cold air leakage and loss of chilled temperatures
• Jammed fresh food tray

This genuine OEM LG part is also compatible with some select Kenmore brand models.

The Freezer Door Gasket is an OEM replacement part for LG refrigerators. It is designed to create a tight seal around the freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering. This ensures the freezer operates efficiently and keeps food frozen at the proper temperature.

Over time, freezer door gaskets can wear out or become damaged due to repeated opening and closing, exposure to cold temperatures, or the buildup of dirt and debris. A faulty gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The door not sealing properly
• Increased energy use
• Food not staying properly frozen

This OEM LG part is also compatible with Sears/Kenmore models.

Replace a cracked or missing door bin with this door basket. It mounts to the refrigerator door to hold bottles and condiments, restoring safe, convenient storage and helping the door close properly.

• Attaches to the inner door to organize bottles and small items within easy reach
• Replaces a bin that is cracked, warped, or has broken locking tabs
• Symptoms include: bin falls off, won't stay seated, spills, or difficulty closing the door
• Restores designed door storage capacity and stability

• Unload the door and lift the old bin up and out of the mounting slots
• Align the new basket with the slots and press down until fully seated on both ends
• Do not force; confirm it's locked in before loading items
• Follow appliance safety guidelines; avoid overloading the bin after installation

This left-side door handle trim restores the finished appearance and edge protection on compatible refrigerators. It replaces cracked, scratched or missing trim to help the handle sit flush and improve the door's cosmetic finish. What it does

• Covers and protects the outer edge of the left door handle area
• Replaces cracked, broken or cosmetically damaged trim pieces
• Helps the handle sit flush and maintain a clean, finished look
• Works with the original mounting points and hardware

• One left door handle trim

• Remove contents from the door and support the door before beginning work
• Use basic hand tools to remove existing trim and secure the replacement to existing screw holes
• Do not force or bend the trim; align to original mounting points to avoid damage

This decor handle is the exterior trim piece for a refrigerator door that restores the original look and grip. It replaces cracked, scratched, or worn trim to improve appearance and provide a finished surface where the handle mounts. What it does:

• Replaces damaged or worn decorative handle trim to restore the appliance's appearance
• Covers and protects the handle mounting area from dirt and wear
• Helps provide a consistent grip surface along the door's edge
• Addresses cosmetic issues like scratches, chips, or fading

• Remove any tape or packaging and match the piece to the door before starting
• Support the door or work with a second person if needed to avoid stress on hinges
• Basic hand tools (screwdriver or nut driver) may be required to remove and reinstall mounting hardware
• Follow OEM instructions and disconnect power only if instructed for models with electrified door components

The Freezer Door Handle is an OEM part for LG refrigerators. It provides a convenient grip for opening and closing the freezer door, ensuring easy and efficient access to the freezer compartment.

Over time, freezer door handles can become loose, damaged, or break due to frequent use, accidental impacts, or general wear and tear. These issues can make it difficult to open or close the freezer door properly.

Symptoms of a bad freezer door handle include:

• Loose or wobbly handle
• Visible cracks or breaks in the handle
• Difficulty in opening or closing the freezer door
• Handle detaching from the door

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.

Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.

Symptoms of a bad French door mullion include:

• The mullion not folding or unfolding correctly
• Visible cracks or damage to the mullion
• Warm air entering the refrigerator, affecting cooling
• Increased energy consumption

This OEM LG part is also compatible with Sears/Kenmore models.

The Basket Assembly is an OEM component specifically designed for LG Door-in-Door refrigerators containing bottom-mounted crisper drawers. This integral assembly organizes stored items within the refrigerator doorway.

Symptoms of a bad basket assembly include:

• Cracked or broken perforated shelves  
• Detached mounting brackets failing to secure basket
• Warped contours no longer fitting base compartment
• Missing attachments inhibiting proper installation

Causes of failure involve stresses from repeated loading/unloading cycles, mineral buildup weakening plastic brackets over time, or impact damage compromising structural integrity.

Replace yours today with this genuine OEM LG assembly to maintain tidy organizational capacity. Precision slots provide adjustable shelf positioning optimized for produce, snacks, and beverages. Compatible across Samsung, Frigidaire, and GE models featuring removable door crisper baskets.

This refrigerator door shelf bin replaces a cracked or missing bin on the fresh food door. It snaps into the molded slots to restore secure, convenient storage for condiments, jars, and small bottles. What it does:

• Mounts to the inner door liner to hold items and free up shelf space
• Restores door storage capacity when the original bin is damaged or missing
• Common symptoms: cracked plastic, broken tabs, bin falls off, won't stay seated
• Helps keep jars and bottles organized and easy to access

• 1 door shelf bin

• Remove items from the old bin, then lift it straight up to release from the door slots
• Align the new bin's hooks with the door slots and press down firmly until it locks
• Handle plastic carefully and consider wearing gloves to avoid cuts from sharp edges
• Do not force the bin; ensure it's positioned in the correct door location before securing

This refrigerator door shelf bin replaces a cracked or missing bin on the fresh food door. It snaps into the molded slots to restore secure, convenient storage for condiments, jars, and small bottles. What it does:

• Mounts to the inner door liner to hold items and free up shelf space
• Restores door storage capacity when the original bin is damaged or missing
• Common symptoms: cracked plastic, broken tabs, bin falls off, won't stay seated
• Helps keep jars and bottles organized and easy to access

• 1 door shelf bin

• Remove items from the old bin, then lift it straight up to release from the door slots
• Align the new bin's hooks with the door slots and press down firmly until it locks
• Handle plastic carefully and consider wearing gloves to avoid cuts from sharp edges
• Do not force the bin; ensure it's positioned in the correct door location before securing

This refrigerator door shelf bin replaces a cracked or missing bin on the fresh food door. It snaps into the molded slots to restore secure, convenient storage for condiments, jars, and small bottles. What it does:

• Mounts to the inner door liner to hold items and free up shelf space
• Restores door storage capacity when the original bin is damaged or missing
• Common symptoms: cracked plastic, broken tabs, bin falls off, won't stay seated
• Helps keep jars and bottles organized and easy to access

• 1 door shelf bin

• Remove items from the old bin, then lift it straight up to release from the door slots
• Align the new bin's hooks with the door slots and press down firmly until it locks
• Handle plastic carefully and consider wearing gloves to avoid cuts from sharp edges
• Do not force the bin; ensure it's positioned in the correct door location before securing

The Refrigerator Door Shelf is an OEM part for LG refrigerators. It provides additional storage space on the door of the refrigerator, allowing for the organization and easy access of frequently used items such as condiments, beverages, and small containers. It measures approximately 14" x 4" x 4".

Causes of a bad refrigerator door shelf can include general wear and tear from repeated use, overloading the shelf with heavy items, or accidental damage during cleaning or reorganization. Cracks or breakage in the plastic material can also render the shelf unusable.

Symptoms of a bad refrigerator door shelf include:

• Cracked or broken shelf
• Items not staying securely on the shelf
• The shelf not fitting properly into the door brackets
• Difficulty in attaching or removing the shelf

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This door stopper cushions and limits the appliance door's movement to reduce slamming and protect the cabinet and door edge. It restores smooth, quiet door operation and helps prevent damage from hard impacts. What it does:

• Acts as a bumper between the door and cabinet to absorb impact and reduce noise
• Keeps the door from over-travel or banging when opened or closed
• Helps stop chips, dents, and wear on the door edge and frame
• Commonly replaced when the existing stopper is worn, cracked, or missing

• Disconnect power or unplug the appliance before beginning any work.
• Inspect the mounting area and remove any old bumper before installing the new stopper.
• Many stoppers press into place; some models use a clip or screw—refer to your service manual for the correct method.

This stopper assembly mounts on the appliance door to cushion movement and hold the door in position, reducing wear and preventing slamming for smoother, safer operation. Fits as the OEM door stop used on compatible LG models. What it does:

• Cushions door movement to prevent hard impacts and reduce noise
• Holds the door in the open or closed position to prevent unwanted swings
• Helps maintain door alignment and reduces stress on hinges and latches
• Common symptom: door slams, won't stay open, or bangs against the cabinet

• Disconnect power and water before starting any repair
• Remove the door or open access for safe replacement
• Replacement typically requires basic hand tools (screwdriver or nut driver)
• Inspect surrounding hinge/fastener hardware and replace if worn

This door stopper assembly mounts at the hinge to control how far the door opens and promote smooth, consistent closing. Replacing a worn or broken stopper restores proper door swing and helps protect the hinge from overextension.

• Limits the door's opening range to prevent overextension
• Guides and cushions door movement for a smoother close
• Helps maintain door alignment at the hinge area
• Common symptoms: door swings too far, doesn't stop at the usual angle, clicks/binds near the hinge, or visible cracks/wear on the stopper

• Disconnect power to the appliance before servicing
• Support the door and use a helper when loosening hinge hardware
• Note the original orientation and transfer any spacers/shims if present
• Tighten fasteners evenly and verify smooth door operation before finalizing reassembly

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

This connector rail secures and aligns the appliance's rail assembly, providing a stable mounting point for associated panels or harnesses. Replacing a worn or broken connector restores proper fit and reduces rattling or looseness. What it does:

• Fastens the rail assembly to the appliance frame to keep panels aligned
• Holds related wiring harnesses or trim in the correct position
• Prevents rail movement that can cause noise or misfit of panels
• Common part to replace when connector is cracked, broken, or missing

• One connector rail

• Disconnect power before starting any repair to avoid shock or injury
• Remove required trim or panels to access the rail; preserve all screws and clips
• Align connector carefully and snap or fasten into place without forcing to avoid breakage
• Ensure wiring harnesses route through the connector are seated and not pinched before reassembly

This guide assembly rail is the replacement drawer slide that restores smooth, stable movement for a refrigerator or appliance drawer. It keeps the drawer aligned and reduces sticking or uneven operation for everyday use. What it does:

• Guides and supports the drawer as it opens and closes to maintain proper alignment.
• Reduces sticking, scraping, and uneven travel caused by worn or damaged rails.
• Helps prevent drawer sagging and improves load stability when pulling out the drawer.
• Works with the factory mounting points and keeps the drawer tracking true.

• One guide assembly rail.

• Disconnect power or follow appliance-specific safety procedures before servicing.
• Remove the drawer or access panel to reach the existing rail; keep fasteners for reuse unless replacement required.
• Compare the new rail to the old part to ensure fit and orientation before installing.
• If fasteners are damaged or missing, replace with OEM-specified hardware.

This guide assembly keeps a sliding appliance drawer or rack aligned for smooth, reliable movement and helps prevent sagging or derailment. It restores proper tracking so the drawer/rack opens and closes without binding. What it does:

• Guides and supports a sliding drawer or rack so it stays aligned during use
• Reduces binding, sagging, or derailment when loading or pulling the drawer/rack
• Eliminates scraping or grinding noises caused by a worn guide
• Helps restore smooth, even motion and proper engagement with the slide mechanism

• One guide assembly

• Disconnect power before starting any repair
• Remove the affected drawer/rack to access the guide; keep track of fasteners
• Align the guide with the slide channel and secure per the OEM fastening points; some designs snap in while others use screws
• If mounting hardware is worn or missing, replace with OEM-specified fasteners for safe operation

This slide rail supports and guides a refrigerator/freezer drawer so it opens and closes smoothly and stays aligned. Replaces a worn or broken rail to restore proper drawer movement and prevent sagging. What it does:

• Guides the drawer on a smooth track for consistent opening and closing
• Restores proper alignment if the drawer sticks, drags, or tilts
• Supports drawer weight to prevent sagging or uneven movement
• Works with existing mounting points and fasteners for a direct replacement

• One slide rail

• Disconnect power to the appliance and remove the drawer before installing
• Compare the old rail to the new part for correct orientation and hardware
• Install using the appliance's original screws; avoid over-tightening to prevent damage
• Test drawer movement after installation and re-check fasteners for security

A replacement slide rail that restores smooth, stable drawer operation and proper alignment. Designed to support the appliance drawer as it opens and closes, it helps reduce sticking, sagging, and uneven movement. What it does

• Provides a guided track for the drawer to slide smoothly in and out
• Restores proper alignment to prevent drawer sagging or binding
• Reduces noise and sticking during operation
• Maintains load support for safe, consistent drawer movement

• Requires basic hand tools; follow for access and disassembly
• Power off and unplug the appliance before starting any repair
• Remove adjacent trim or components carefully to avoid damage
• Replace rails in matched pairs for best performance

Note: Left Rail Cap

Note: Right Rail Cap 

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This center hinge assembly replaces the factory center hinge that supports and aligns the refrigerator doors, restoring proper door movement and a tight seal for efficient cooling. It's a direct-fit mechanical hinge used where the upper and lower doors meet. What it does:

• Supports the weight of the upper/lower doors and maintains proper door alignment
• Lets the door pivot smoothly to open and close without binding
• Helps the door seal correctly to prevent warm air leaks and frost buildup
• Stops sagging or uneven door gaps that cause rubbing or poor closure

• One center hinge assembly

• Disconnect power to the appliance before starting work; if the unit has a water line, shut off the water supply as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use basic hand tools; follow the manufacturer service instructions for torque and fastener sequence

This center hinge assembly secures and guides a refrigerator door, restoring proper door alignment and smooth opening/closing. Replacing a worn or damaged center hinge helps stop sagging doors and improves seal integrity for reliable cooling. What it does:

• Supports the center of a refrigerator door and keeps it aligned on the cabinet frame
• Guides door movement to ensure smooth opening and closing
• Restores proper door fit to help maintain an even door seal
• Addresses symptoms such as door sagging, misalignment, scraping or grinding noises from the hinge

• Disconnect power to the appliance before starting any repair.
• Doors are heavy; support the door and use a second person or proper support when removing or installing hinges.
• Keep track of fasteners and hinge shims or spacers; reinstall in the same order and orientation.

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This hinge secures and guides a refrigerator door for reliable opening and closing. It restores proper door alignment to help maintain an airtight seal and prevent sagging or rubbing. What it does:

• Supports the refrigerator door and attaches it to the cabinet frame
• Guides smooth door movement and maintains alignment
• Helps prevent door sag, uneven gaps, and items catching when opening/closing
• Reduces rubbing, scraping or abnormal door noise caused by a worn hinge

• Disconnect power and remove food from the door before starting; support the door to prevent dropping
• Use the factory mounting screws and follow OEM torque and alignment steps
• Check door position and seal after installation; adjust hinge mounting if necessary

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

The Ice Dispenser Door Assembly is an OEM part for LG refrigerators. This assembly includes the door and the necessary components that control the opening and closing of the ice dispenser chute. It plays a vital role in maintaining the efficiency of the ice dispensing system by ensuring that the ice chute remains sealed when not in use, preventing warm air from entering the freezer compartment.

Causes of a bad ice dispenser door assembly can include wear and tear from frequent use, damage from ice buildup, or issues with the mechanical or electronic components that control the door.

Symptoms of a bad ice dispenser door assembly include:

• Ice dispenser door not opening or closing properly
• Frost or ice buildup around the ice chute
• Warm air leaking into the freezer, affecting its temperature
• The ice dispenser not functioning efficiently

This OEM LG part is also compatible with Sears/Kenmore.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Right Ice Door Spring is an OEM part for LG refrigerators. This part provides the necessary tension to ensure the ice door opens and closes smoothly, maintaining the seal to keep the ice compartment cold and efficient.

Causes of a bad ice door spring can include wear and tear over time, loss of tension due to repeated use, or physical damage from accidental mishandling.

Symptoms of a bad Right Ice Door Spring include:

• Ice door not staying closed
• Difficulty in opening or closing the ice door
• Unusual noises when the ice door operates
• Increased frost buildup around the ice compartment

This OEM LG part is also compatible with some Kenmore models.

The Dispenser Lever Retainer is an OEM part for LG refrigerators. This part secures the dispenser lever in place, this part ensures the smooth operation of the water and ice dispenser. 

Causes of a bad Dispenser Lever Retainer can include normal wear and tear from repeated use, accidental damage, or deterioration of the material over time.  

Symptoms of a bad Dispenser Lever Retainer include:

• The dispenser lever is loose or wobbly
• Difficulty in dispensing water or ice
• The lever does not return to its original position after use
• Unintended activation or difficulty in activating the dispenser

This OEM LG part is also compatible with some Kenmore models.

The Left Ice Door Spring is an OEM part for LG refrigerators. It is responsible for providing the necessary tension to ensure the ice door closes properly after dispensing ice. This spring helps maintain an airtight seal, preventing warm air from entering the ice compartment and ensuring efficient operation of the ice maker.

Over time, the ice door spring can become worn out, lose tension, or break due to repeated use or accidental damage. A faulty spring can result in the ice door not closing correctly, which can lead to issues with ice production and storage.

Symptoms of a bad left ice door spring include:

• The ice door not closing or sealing properly
• Warm air entering the ice compartment
• Excessive frost buildup around the ice dispenser
• The ice door feeling loose or not springing back into place

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Ice Dispenser Door Lever is an OEM part for LG refrigerators. This part is responsible for operating the ice dispenser door, allowing ice to be dispensed from the ice maker when the lever is pressed.

Causes of a bad part can include mechanical wear and tear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the lever's motion.

Symptoms of a bad Ice Dispenser Door Lever include:

• Failure of the ice dispenser door to open when the lever is pressed
• The door opening erratically or becoming stuck
• Difficulty in dispensing ice due to the improper operation of the door

This OEM LG part is also compatible with some Kenmore models.

This replacement lever button restores a tactile control on the appliance's front control panel so you can reliably select functions and settings. It replaces a worn, cracked, or non-responsive lever used to press a control switch. What it does

• Replaces a damaged or worn control lever that prevents reliable button actuation
• Restores a solid tactile feel when selecting cycle options or settings
• Helps stop a lever that is stuck, loose, or broken from sticking or failing to engage the switch
• Works with the existing control bezel and switch assembly to provide normal user input

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Access may require removing the control panel or bezel; keep track of screws and fasteners
• Remove the old lever by gently prying or unfastening retaining clips; press the new lever onto the switch shaft until it seats

The Cover, Display is an OEM component specifically designed for LG refrigerators. This part protects and houses the display panel that provides important appliance information and allows for cycle/setting selections. 

The display cover is responsible for safeguarding the sensitive electronic display from damage and wear. It provides an aesthetically pleasing outer surface that seamlessly blends into the refrigerator exterior. 

Causes of a bad cover can include cracks, scratches, discoloration from repeated cleaning, or loose/missing mounting brackets over time. 

Symptoms of a bad cover include:

• Exposure of the display components to moisture or impact damage
• Display malfunctions or errors due to inadequate protection
• An unattractive or incomplete appearance

This OEM LG part is also compatible with Sears/Kenmore. Replacing it will preserve your refrigerator's display and upgrade its look.

The Refrigerator Dispenser Lever is an OEM part for LG refrigerators. It is responsible for controlling and dispensing water from the door-mounted dispenser.

Symptoms of a bad dispenser lever include:

• Difficulty activating or inconsistent water flow when pressed
• Water dispensing without pushing the lever 
• Loose fit or wobbly feel
• Missing or broken lever pieces 

Causes of a bad dispenser lever can be wear and tear over time from frequent use. Exposure to impacts or damage during cleaning can also affect proper function.

This part is also compatible with select Sears/Kenmore models.

The Dispenser Cover is an OEM part for LG refrigerators. It covers and protects the dispenser area where water and ice are dispensed, ensuring the components remain clean and functional.

Over time, the dispenser cover can become damaged due to repeated use, exposure to moisture, or accidental impact. A compromised cover can affect the appearance of the refrigerator and lead to difficulties in using the dispenser.

Symptoms of a bad Dispenser Cover include:

• Cracks or breaks in the cover
• Difficulty in operating the dispenser
• Water or ice leaking from the dispenser area

This OEM LG part is also compatible with Sears/Kenmore.

Note: This is just the cover and does not include any other components. For the entire assembly, order part number ACQ85430239.

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

This evaporator assembly is the sealed evaporator coil and mounting used in compatible refrigerators to absorb heat and support the freezer cooling cycle. Replacing a damaged evaporator restores proper cold circulation and helps eliminate frost build-up in the evaporator area. What it does:

• Absorbs heat from inside the freezer compartment so the refrigerant can carry heat away
• Works with the evaporator fan and defrost system to maintain proper freezer temperatures
• A faulty or damaged evaporator can cause frost accumulation, reduced cooling, or long run-times
• Installed as part of the sealed refrigeration loop to enable normal compressor cycling

• One complete evaporator assembly

• Disconnect power before starting any repair; work in a dry, well-lit area
• This is part of the sealed refrigeration system; repairs that require cutting or brazing refrigerant lines should be performed by a qualified, certified appliance technician
• Inspect and replace any damaged gaskets, insulation, or fasteners during reassembly for best results
• Follow manufacturer service instructions for proper defrost and airflow alignment

The Thermistor Assembly is an OEM part for LG refrigerators. It serves a crucial function in monitoring and regulating the temperature within the appliance. By sensing temperature changes, the thermistor sends information to the refrigerator’s control board, ensuring the system adjusts cooling to maintain the desired temperature settings. 

Symptoms of a failing thermistor assembly include:

• Inconsistent temperatures in the refrigerator or freezer
• Refrigerator running longer than usual or not cooling efficiently
• Frequent fluctuations in temperature readings

Causes of thermistor assembly failure typically involve electrical faults, damage from moisture or frost, or simple wear over time, which can impact its ability to accurately measure and report temperatures.

This OEM LG part is also compatible with Sears/Kenmore.

The Overload Compressor is an OEM part for LG refrigerators. This part protects the refrigerator's compressor from overheating and potential damage by acting as a safety device. It works by monitoring the compressor's electrical current and temperature. If the compressor operates under conditions that could lead to overheating or overcurrent, the overload protector will cut off the power to the compressor, allowing it to cool down before potentially restarting.

Causes of damage to the Overload Compressor can include power surges, electrical faults within the refrigerator, or a malfunctioning compressor that requires more current than usual to operate. 

Symptoms of a bad Overload Compressor include:

• The refrigerator not cooling properly or not cooling at all
• The compressor failing to start, indicated by a clicking sound coming from the back of the refrigerator where the compressor is located.
• The refrigerator or freezer section warming up

This OEM LG part is also compatible with some Kenmore models.

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

Replacement fan guide that directs airflow from the refrigerator fan to improve cooling distribution and help keep the fan blade clear of nearby components. Restores proper airflow and can reduce rubbing or scraping noises. What it does:

• Channels airflow from the fan to promote even temperatures throughout the compartment.
• Keeps the fan blade aligned and away from cabinet walls and other components.
• Commonly replaced when cracked, warped, or broken parts cause rubbing or unusual fan noise.
• Helps maintain efficient cooling by restoring the intended airflow path.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access typically requires removing the interior cover or rear evaporator cover.
• Handle the plastic guide carefully to avoid cracking; align mounting tabs and secure using the original fasteners.
• Inspect the fan blade and motor for damage while replacing the guide; replace any damaged components to avoid repeat issues.

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

The Drier Assembly is an OEM part for LG refrigerators. This part removes moisture and contaminants from the refrigerant, ensuring the system operates efficiently and effectively. The drier assembly helps maintain the proper function of the compressor and other cooling components, contributing to the longevity and performance of the refrigerator.

Causes of a bad drier assembly can include clogs from debris, wear and tear over time, or contamination from moisture or refrigerant leaks.  

Symptoms of a bad drier assembly include:

• The refrigerator not cooling properly
• Frost or ice buildup on the evaporator coils
• Increased noise from the compressor
• Reduced efficiency and higher energy consumption
• You should replace the drier assembly if it becomes faulty or damaged.

This OEM LG part is also compatible with select Sears/Kenmore models.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

The Defrost Control Assembly is an OEM part for LG refrigerators, crucial for regulating the defrost cycle within the unit. This component plays a pivotal role in ensuring that the evaporator coils are periodically defrosted, preventing the build-up of ice that can impede airflow and cooling efficiency. 

Causes of a bad Defrost Control Assembly can include electrical failures, sensor malfunctions, or damage to the assembly itself, which can disrupt the defrost cycle.  

Symptoms of a bad Defrost Control Assembly include:

• The refrigerator or freezer compartment becoming too warm due to blocked airflow from ice accumulation
• A noticeable build-up of frost or ice on the evaporator coils or in the freezer compartment
• The refrigerator running continuously without cycling off
• Unusual noises coming from the refrigerator as ice builds up and interferes with the fan

This OEM LG part is also compatible with Sears/Kenmore.

The Door Switch is an OEM part for LG refrigerators. It is located near the door hinge and is activated by the door's movement. When the door is closed, the switch is engaged, allowing the interior light to turn off and other functions to operate normally. When the door is opened, the switch is released, triggering the interior light to turn on and potentially activating other features, such as the ice dispenser or cooling system.

Causes of a faulty door switch can include wear and tear over time, mechanical damage from excessive force, or electrical issues.

Symptoms of a bad door switch may include:

• The interior light not turning on when the door is opened
• The interior light remains on when the door is closed
• Issues with the dispenser or other functions associated with the door switch

The Dispenser Switch is an OEM part for LG refrigerators. It is responsible for controlling the operation of the dispenser, allowing you to dispense water or ice from the refrigerator door. This switch is located in the dispenser house and activates the dispenser when pressed.

Causes of a bad dispenser switch can include wear and tear over time, electrical malfunctions, or damage due to accidental mishandling or impact.

Symptoms of a bad dispenser switch include:

• Inability to dispense water or ice when pressing the buttons.
• The dispenser works intermittently. 
• No response or delayed response when pressing the dispenser buttons.

This LG part can also be used on Kenmore/Sears appliances. 

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Condenser Fan Motor Assembly is a genuine OEM replacement part that plays a crucial role in the functioning of your LG refrigerator. The assembly includes the fan blade, which directs air across the condenser, and the motor that powers the fan blade. Operating at DC11V with 176mA and 1.93W, this DC motor includes an electrical plug with a 3-pin harness.

Causes of a bad DC motor can include wear and tear over time, bearing failure, electrical issues, or exposure to excessive heat or moisture. A failing motor may cause the refrigerator to malfunction or stop working altogether.

Symptoms of a bad Motor DC include:

• The refrigerator not cooling properly or not cooling at all
• Strange noises coming from the refrigerator
• The ice maker not producing ice or dispensing ice
• The compressor not running or running continuously

This OEM LG part is also compatible with Sears/Kenmore models.

The MOTOR, DC is an OEM part for LG refrigerators. It is a direct current electric motor responsible for operating components related to cooling and airflow, such as the condenser fan and cooling fan. Efficient airflow circulation is critical for pulling heat away from refrigerated compartments and maintaining even temperatures throughout the fridge.

Causes of a bad motor can include excess dust buildup over time inhibiting proper fan rotation, worn motor brushes, or damaged motor windings affecting current flow. 

Symptoms of a bad direct current motor include:

• Abnormally warm refrigerator temperatures 
• Louder than usual operating sounds
• Lack of air coming from ventilation areas  
• Visible buildup of frost or condensation inside the fridge

Replace yours today with this genuine OEM LG part to restore optimal cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This lamp cover is the replacement clear/white lens that protects and diffuses the appliance interior light, restoring proper illumination and preventing direct bulb contact. It helps keep the light assembly enclosed and looking finished. What it does:

• Protects the interior light bulb from spills, dust, and impact
• Diffuses light for even illumination inside the appliance
• Restores a cracked, yellowed, or missing lens to improve visibility
• Prevents direct contact with the bulb for safer operation

• One lamp cover (lens) as shown

• Remove power to the appliance before replacing the lens (unplug or shut off circuit)
• Typically snaps or screws into the light housing; use care to avoid breaking the new lens
• Inspect the light housing and bulb; replace bulb if damaged before reassembly

Replacement lamp cover that protects and diffuses an appliance's interior light, restoring even illumination and shielding the bulb from spills and contact. Restores proper light output and appearance after a cracked or missing lens. What it does:

• Protects the interior light bulb from food splatter, grease, and accidental contact.
• Diffuses and evens interior illumination to reduce hot spots and glare.
• Replaces cracked, yellowed, or missing lenses that can cause dim, flickering, or exposed-bulb issues.
• Matches the original lamp housing shape and secures with the appliance's existing clips or screws.

• Always disconnect power (unplug appliance or switch off circuit) and allow the bulb to cool before beginning.
• Remove any retaining screws or clips carefully; handle the cover gently to avoid cracking.
• Seat the cover securely in the lamp housing and reinstall original hardware—do not overtighten screws.
• After installation, restore power and verify the light operates and the cover is properly seated.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

The Front Evaporator Motor Grommet is an OEM part for LG refrigerators. This grommet cushions and secures the evaporator motor, reducing vibrations and noise during operation to ensure efficient cooling.

Causes of a bad grommet can include prolonged use leading to material fatigue, exposure to extreme temperatures, or physical damage from accidental impacts. A damaged grommet can result in increased noise and potential misalignment of the evaporator motor.

Symptoms of a bad evaporator motor grommet include:

• Increased noise from the refrigerator
• Vibrations or rattling sounds
• Poor cooling performance
• The evaporator motor becoming loose

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

This cover assembly protects and houses a refrigerator sensor, keeping the sensor and its wiring secure while helping maintain reliable temperature or dispenser sensing. It replaces cracked, missing, or damaged sensor covers to restore proper protection. What it does:

• Shields the sensor from moisture, debris, and accidental contact
• Keeps sensor wiring routed and secured to prevent strain or disconnection
• Helps maintain correct sensor positioning for accurate readings
• Common symptom: visible cracked or broken cover, loose wiring, or sensor-related errors

• One cover assembly

• Disconnect power to the appliance before beginning any work
• Handle the sensor area gently and avoid touching the sensor element or circuit surfaces
• Align the cover with tabs or mounting points and secure until it snaps or fastens into place
• After installation, restore power and verify the sensor and related functions operate normally

The Door Bracket is an OEM part for LG refrigerators. This bracket supports the refrigerator door by providing stability and ensuring proper alignment during opening and closing. It plays a crucial role in maintaining the door’s secure fit, which is essential for maintaining the internal temperature and efficiency of the appliance.

Common causes of a bad door bracket include wear and tear from frequent use, impact damage, or corrosion due to moisture.

Symptoms of a bad door bracket include:

• The refrigerator door not closing properly
• The door sagging or being misaligned
• Unusual noises when opening or closing the door
• Gaps in the door seal leading to temperature inconsistencies

This OEM LG part is also compatible with Sears/Kenmore.

This refrigerator sheath heater melts frost from the evaporator so air can circulate freely and the unit can cool properly. Replacing a failed heater helps restore even temperatures and reduce frost buildup in the freezer.

• Warms the evaporator coil during defrost cycles to clear ice
• Helps prevent restricted airflow, warm spots, and long run times
• Common failure symptoms include heavy frost on the evaporator, poor cooling, ice buildup on the back panel, or frequent defrost errors
• May cause sizzling sounds or water under the evaporator area during normal operation after replacement

• Unplug the refrigerator before service; defrost any heavy ice to access parts safely
• Access typically from the rear of the freezer compartment behind the evaporator cover
• Handle heater leads and evaporator fins carefully to avoid damage
• Secure all connectors before reassembly

This LED assembly replaces a failed interior lighting module to restore bright, energy-efficient illumination. Designed to match the original fit and light output for a seamless replacement. What it does:

• Provides interior cabinet lighting so you can clearly see contents.
• Replaces dim, flickering, or non-working LEDs commonly caused by failed diodes or connectors.
• Restores consistent, cool-running illumination without changing appliance cooling performance.
• Matches OEM mounting points and electrical connector style for a direct-swap replacement when compatible.

• One LED assembly.

• Disconnect power to the appliance before starting any service to avoid shock.
• Remove existing light cover and mounting fasteners; transfer or replace connector per OEM instructions.
• Handle the LED module by its housing; avoid contact with LED surfaces and circuit traces.

This LED assembly restores the display backlight so the TV screen lights evenly and images are visible. Use it to replace a damaged or failed backlight strip that causes dark areas or no screen illumination. What it does:

• Provides the LED light source for the TV's LCD panel backlight.
• Replaces burned-out or flickering LEDs that cause dim, uneven, or striping light.
• Helps resolve screens that power on but appear very dark or show only a faint image.
• Works as the direct replacement component for the TV's backlight system.

• High-level replacement; a moderate level of disassembly of the TV panel is required—refer to manufacturer service instructions.
• Disconnect power and allow capacitors to discharge before servicing.
• Handle the LCD panel and LED strip carefully to avoid damage from flexing, fingerprints, or static.

This LED assembly restores backlight illumination for compatible LG displays, improving screen brightness and uniformity so images look clearer and easier to see. It replaces a worn or failed backlight strip. What it does:

• Provides the backlight illumination that lights the LCD panel
• Restores overall brightness and reduces dark or dim areas
• Can stop flickering or intermittent light if LEDs are failing
• Helps eliminate uneven lighting or bright/dark bands across the screen

• One LED assembly (single backlight strip) as shown

• Disconnect power and allow capacitors to discharge before starting
• Handle the LED strip and circuit board by the edges; avoid touching LED surfaces and PCB traces
• Keep track of screws and clips; test the display before fully reassembling