Parts for Lg LFXC24726S/03: Ice Maker & Ice Bin Parts

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

Door hinge screws secure the refrigerator door hinges to the cabinet frame, allowing proper door operation and alignment. Replace when doors sag, don't close properly, or screws are loose, stripped, or missing causing door misalignment.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Routes airflow in your refrigerator's cooling system. Replace if you notice temperature inconsistencies or poor air circulation. Confirm fit with your model number.

Multi-outlet vent duct assembly for bottom-mount refrigerators. Replaces cracked, damaged, or leaking ducts to restore proper airflow and ventilation.

Replacement freezer storage tray for bottom-mount refrigerators. Restores a level surface for frozen foods when your original tray is cracked or warped.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

Replacement drawer tray assembly for refrigerator lower storage drawer. Restores food organization and support. Replaces cracked, warped, or missing trays.

Replacement drawer tray assembly for refrigerator lower storage drawer. Restores food organization and support. Replaces cracked, warped, or missing trays.

Platform that supports and guides refrigerator storage drawers along slides. Replace if cracked, damaged, or broken to restore smooth drawer operation.

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

Replace a cracked, chipped, or missing refrigerator shelf to restore stable storage and organization. Provides a secure, level surface for containers.

Replace a cracked, chipped, or missing refrigerator shelf to restore stable storage and organization. Provides a secure, level surface for containers.

Replacement glass shelf for refrigerator storage. Installs inside fridge compartment to support food items. Needed when original is cracked or broken.

Refrigerator shelf assembly installs inside the fresh food compartment. Replace if your shelf is cracked, broken, or no longer holds items securely.

Plastic rail holder that secures drawer glide rails in your refrigerator. Replace if cracked, broken, or missing to restore proper drawer support.

Secures slide rail assembly for smooth drawer or shelf tracking. Replace if cracked, broken, or missing to restore proper support and alignment.

Restores smooth drawer sliding in your refrigerator or freezer. Replace this rail guide assembly if cracked, broken, or causing drawer misalignment.

This guide assembly restores smooth, stable sliding for a freezer/refrigerator drawer or shelf track so drawers open and close without catching or falling out of alignment. It replaces worn or broken rails that cause noisy or rough operation. What it does

• Provides the sliding track and mounting interface that guides a drawer or shelf along its travel
• Replaces cracked, bent, or worn rail sections that cause sticking, misalignment, or dropped drawers
• Restores proper engagement so drawers slide smoothly and stay securely supported
• Helps eliminate scraping, grinding, or noisy movement from damaged guide hardware

• One guide assembly

• Disconnect power to the appliance before servicing to avoid injury
• The part number matches the existing rail before installation
• Basic hand tools are typically required; keep fasteners for reuse unless replacement provided
• Follow OEM instructions for removal and reassembly to ensure correct alignment and function

Secures slide rail to mounting point in refrigerator drawers. Replace if cracked, worn, or missing to restore proper alignment and smooth drawer operation.

This is a rail connector or basket support piece that attaches to the interior of the freezer compartment and helps guide or support a sliding drawer or basket. It ensures the drawer moves in and out smoothly along its track. Replace this part if the freezer drawer sits unevenly, slides off track, or if the original connector is cracked or broken.

Supports and guides refrigerator drawers for smooth opening and closing. Replace when worn or cracked to restore proper alignment and prevent binding or tilting. Confirm fit with your model number.

Shallow refrigerator bin for deli-style items in the Fresh Room compartment. Replaces cracked, broken, or missing trays to restore organized storage.

This is a tray cover assembly that sits on top of the deli or crisper drawer inside the refrigerator compartment. It acts as a shelf and helps maintain proper humidity and temperature for items stored in the drawer below. Replace it if the cover is cracked, warped, or broken, which can affect food freshness and drawer functionality.

Center vegetable drawer tray for bottom-mount refrigerators. Replaces cracked, broken, or missing trays. Installs in center crisper section.

Right-hand vegetable drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing produce storage trays in the crisper.

Left vegetable crisper drawer assembly for LG bottom-mount refrigerators. Replaces cracked, broken, or jammed drawers in the fresh food compartment.

Restore the interior of your refrigerator with this T/V cover assembly. It covers the temperature-variable (T/V) section and helps direct airflow in the fresh food compartment, protecting components and maintaining a clean, finished appearance for consistent performance.

• Covers and protects the T/V section/duct inside the fresh food compartment
• Helps guide airflow to the T/V area as designed by the manufacturer
• Replaces cracked, warped, or missing panels to restore proper fit and function
• Common signs to replace: broken tabs, loose or rattling panel, uneven cooling around the T/V area

• Disconnect power before servicing
• Clear the shelf area and remove adjacent drawers or trim as needed
• Release retaining screws or clips and lift out the old cover carefully
• Seat the new cover evenly on its supports; ensure vents/slots align and the panel locks into place before restoring power

This is a left-side drawer slide rail assembly that guides a refrigerator drawer in and out smoothly on its track. It mounts inside the refrigerator cavity and supports the weight of the drawer and its contents. Replace this rail if the drawer sticks, wobbles, does not glide evenly, or if the rail is cracked or bent.

The vegetable tray guide assembly is the plastic rail or track system that supports and directs your refrigerator's vegetable or crisper drawer as it slides in and out. It keeps the drawer aligned and moving smoothly on the correct path. Replace this part if your crisper drawer is difficult to open, slides crookedly, or has fallen off its track.

Supports and guides refrigerator drawers along slide tracks. Replace when drawers bind, stick, or come off track to restore smooth opening and closing.

Keeps refrigerator drawers aligned and sliding smoothly. Replace when drawers jam, sag, or move unevenly. Verify fit with your model number before ordering.

Rail guide assembly that supports and guides refrigerator pull-out drawers. Replace if rail is bent, cracked, or broken causing drawer misalignment.

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

This cover cap conceals screws or mounting hardware on your refrigerator. Replace if cracked, broken, missing, or discolored to restore a clean appearance.

Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Covers and protects the refrigerator door hinge assembly. Replace if cracked, broken, or missing to restore a clean finished look and shield hinge parts.

Covers and protects the door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look and shield wiring.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.

Door foam assembly that installs inside your refrigerator door panel. Replace if the original foam is compressed, cracked, or missing to restore proper insulation.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Plastic slide that supports and guides refrigerator or freezer drawers for smooth opening and closing. Replaces worn, broken, or cracked guides.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement door shelf bin for refrigerator doors. Holds bottles, jars, and condiments. Replace if cracked, broken, or damaged. Installs on door interior.

Replaces a broken or missing door stopper assembly on your refrigerator. Cushions door movement and holds the door in position to prevent slamming.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

Rail holder secures door shelves in your refrigerator. Replace this part if it's cracked, broken, or missing and shelves won't stay properly aligned.

Drawer rail connector for refrigerators. Secures and aligns the drawer slide rails to the cabinet frame. Replace if cracked, broken, or missing.

Mounting bracket that secures sliding rails inside your refrigerator. Replace this holder if the original is cracked, broken, or missing and rails have lost support.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Mounting bracket that secures sliding rails or guides in your refrigerator. Replace this holder if it's cracked, broken, or missing to restore alignment.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Left-hand rail end cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps on drawer rail ends. Secures and protects rail edges.

Right-side rail cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps that cover the drawer rail ends for a finished look.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Secures and aligns your refrigerator door for smooth operation. Replace when doors sag or don't seal properly. Confirm fit with your model number.

Replace your refrigerator's center door hinge to restore proper alignment and seal between upper and lower doors. Fixes sagging, gaps, or misalignment issues.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.

Fix dispenser drips and spills with this refrigerator dispenser funnel. Guides water flow cleanly to prevent messes. Simple 5-minute installation.

Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.

Molded trim cover that protects the user interface area. Replace if cracked, peeling, or missing to restore a clean appearance and proper support.

Fixes cracked or broken dispenser front panel. Covers water and ice dispenser area. Direct replacement restores function and appearance.

Covers and protects the dispenser area on your refrigerator. Replace if cracked, broken, or scratched from repeated use and moisture exposure.

Ice won't dispense or keeps flowing? This ice dispenser button replaces broken levers causing continuous dispensing. DIY-friendly repair in 30-45 minutes.

Replaces a broken, cracked, or missing water dispenser button on your refrigerator. This snap-on part installs on the dispenser housing panel.

Water pooling under your dispenser? This drip tray catches overflow and spills. Cracked or stained trays are easy to replace with basic tools.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Freezer not cooling or building excessive frost? This evaporator coil assembly absorbs heat to maintain proper temperatures. Restores effective cooling.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

The Thermistor Assembly, PTC is an OEM replacement part for LG refrigerator models. As a key sensor, the thermistor monitors and reports temperature levels inside fridge and freezer compartments to the main control board. It ensures optimal cooling through precise thermal feedback.

Causes of a bad thermistor can include failure to calibrate accurately due to age, loose connections disrupting readings, or external impacts compromising sensor integrity.  

Symptoms of a bad thermistor include:

• Abnormal or inconsistent temperatures within fridge sections  
• Compressor and fans cycling on and off too frequently
• Error codes relating to temperature display
• Inability of the control board to read temperature values

This OEM LG part is also compatible with Sears/Kenmore. Replacing a faulty thermistor restores exact temperature control for safe, long-lasting food storage.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Refrigerator not cooling evenly or making loud fan noise? This air guide directs airflow from the blower to restore proper cooling. Simple 15-minute fix.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.

This is a temperature sensor assembly that monitors the internal temperature of the refrigerator compartment and relays readings to the control board. It helps regulate cooling cycles and defrost timing to maintain proper temperatures. Replace this sensor if your refrigerator is running too cold, too warm, not defrosting properly, or displaying error codes related to temperature.

Fix a refrigerator that won't turn off the light when the door closes with this magnetic door switch. Simple DIY repair for most home refrigerators.

Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

The Motor Assembly,dc is an OEM part for LG refrigerators. This fan motor assembly is responsible for circulating air within the fresh food compartment, ensuring proper cooling and temperature distribution. It provides the necessary airflow to keep your food items fresh and properly chilled.

Symptoms of a bad fan motor assembly include:

• Inadequate cooling in the fresh food compartment
• Unusual noises coming from the refrigerator
• Fan not spinning properly

A bad fan motor assembly can occur due to electrical issues, wear and tear, or other internal malfunctions. If you notice symptoms such as inadequate cooling in the fresh food compartment, unusual noises coming from the refrigerator, or the fan not spinning properly, it may be time to replace the fan motor assembly.

This LG replacement part is also compatible with Sears/Kenmore refrigerators.
 

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Refrigerator motor bracket secures the compressor or fan motor in place. Fixes excessive vibration or rattling noises. Moderate DIY repair.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Replace your refrigerator's light cover lens to restore proper illumination and protect the bulb. Fits if your dome light lens is cracked or yellowed.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

This is a rubber or elastomer damper that supports and isolates the evaporator fan motor inside the refrigerator. It absorbs vibration from the motor to reduce noise during normal operation. Replace this part if you hear excessive buzzing, rattling, or vibration coming from the freezer section, which often indicates the damper has hardened or deteriorated.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Hearing rattling or vibration noises from your refrigerator? This motor bracket assembly secures and aligns the motor to reduce noise and prevent shifting.

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

Freezer not defrosting or frost building up? This defrost heater melts ice off evaporator coils so cold air flows properly. DIY repair in 30-45 minutes.

LED light assembly for bottom-mount refrigerators. Replaces broken, dim, or non-functional interior lighting module. Installs in fresh food compartment.

Replaces worn LED backlight strip in your refrigerator display. Restores screen brightness and clarity when images appear dim or uneven. Verify fit with your model number before ordering.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Power cord for bottom-mount refrigerators. Connects your refrigerator to the electrical outlet. Replace if cord is frayed, damaged, or missing.

Fix a refrigerator that won't cool, has no power, or displays error codes. This power control board regulates main electrical functions. Moderate repair.

This service power control board restores service-mode power and control functions on compatible LG appliances, letting technicians run diagnostics and onboarding procedures without intermittent power or communication issues. What it does:

• Provides power and control to service/onboarding circuits and diagnostic interfaces.
• Manages communication between service ports and the appliance control system during operations.
• Helps resolve symptoms like service-mode failures, unresponsive diagnostic interfaces, or intermittent control power during servicing.
• Supports proper execution of OEM onboarding and diagnostic procedures when the original SVC PCB is faulty.

• Always unplug the appliance (and turn off water supply if applicable) before starting service.
• Observe ESD precautions; handle the PCB by its edges and avoid touching circuitry.
• Carefully disconnect and reconnect mating wire harnesses; confirm connectors are fully seated.
• Follow the OEM service manual for onboarding/diagnostic procedures.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.