Parts for Lg LFXS30766D/01: Ice Maker & Ice Bin Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

This is a rear end cap that attaches to the end of the refrigerator door handle. It provides a finished appearance and secures the handle in place. Replace this cap if it is cracked, broken, or missing, which can cause the handle to feel loose or look incomplete.

This is a black plastic end cap that attaches to the refrigerator door handle to provide a finished appearance and help secure the handle in place. It snaps onto the end of the handle assembly. Replace this cap if it is cracked, broken, or missing, which can cause the handle to feel loose or detract from the refrigerator's appearance.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replacement mounting screw for refrigerator panels and brackets. Restores secure attachment when original fasteners are missing, stripped, or damaged.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Routes airflow in your refrigerator's cooling system. Replace if you notice temperature inconsistencies or poor air circulation. Confirm fit with your model number.

Multi-outlet vent duct assembly for bottom-mount refrigerators. Replaces cracked, damaged, or leaking ducts to restore proper airflow and ventilation.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

This is a single roller wheel assembly used to support and allow smooth movement of components such as drawers or bins inside the refrigerator. It ensures that parts glide easily when opened or closed. Replace this roller if drawers are sticking, wobbling, or no longer rolling smoothly.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Drawer tray assembly forms the shelf base for slide-out bins in your refrigerator. Replace if cracked, warped, or broken to restore stable storage.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Fix a broken or cracked freezer drawer that won't slide properly. This complete drawer assembly includes basket, runners, and glides. DIY-friendly repair.

Fix a broken or cracked freezer drawer that won't slide properly. This complete drawer assembly includes basket, runners, and glides. DIY-friendly repair.

Replace a cracked, broken, or missing net shelf in your refrigerator door. This mesh-style storage shelf installs on the door to organize items.

Mesh shelf net for refrigerator door or interior shelves. Secures bottles, cans, and small items. Replace when torn, sagging, or missing.

Glass or wire shelf assembly that installs in your refrigerator compartment. Replace if cracked, broken, or no longer holds items securely in place.

Replace a cracked, broken, or missing refrigerator glass shelf. This tempered glass shelf assembly installs inside your fridge to restore storage.

Replace your broken, cracked, or chipped refrigerator glass shelf assembly. Restores stable storage surface for organizing food and containers inside.

Replace your broken, cracked, or chipped refrigerator glass shelf assembly. Restores stable storage surface for organizing food and containers inside.

This rail holder secures the drawer glide rails in your refrigerator. Replace if the holder is cracked, broken, or missing, causing drawer instability.

Secures rails or guides in your refrigerator to keep racks and sliding components aligned. Replace if clip is broken, cracked, or missing to restore fit.

Slide rail for refrigerator freezer drawers. Supports the drawer and enables smooth in-and-out sliding. Replace if broken, cracked, or causing instability.

Telescopic rail guide assembly for smooth freezer drawer sliding. Replace if drawer sticks, wobbles, or won't extend fully. Verify fit by model number.

Replacement tray assembly that sits in the refrigerator compartment to support and organize items. Replace if your tray is cracked, warped, or missing.

Freezer drawer rail assembly for refrigerators. Supports and guides the freezer drawer for smooth sliding. Replace when rails are broken, cracked, or worn.

Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.

Left-hand support rail for bottom freezer baskets. Replace this plastic slide rail if cracked, broken, or missing to restore smooth drawer operation.

Secures and aligns refrigerator components to prevent shifting during use. Replace if bracket is cracked, broken, or missing to restore stable mounting.

Replaces a cracked or broken tray cover above a storage drawer in your refrigerator. Restores a flat, supportive surface and smooth drawer operation.

Crisper drawer for your refrigerator's fresh food section. Replace if cracked, discolored, or missing to neatly store produce and ensure smooth sliding.

Replacement crisper drawer for your refrigerator's produce compartment. Installs in the lower fresh food section to store fruits and vegetables securely.

Replace your cracked, broken, or missing refrigerator crisper drawer. Restores organized produce storage in the fresh food section with smooth sliding access.

Refrigerator cover assembly that encloses internal components and restores a finished exterior. Replace when the original is cracked, dented, or worn.

A replacement guide assembly that secures and aligns internal TV components so the display and moving parts track properly. Restores fit and reduces rubbing or loose movement from worn guides. What it does:

• Positions and supports internal panels or sliding components to maintain proper alignment
• Helps prevent binding, noise, or uneven movement from loose or damaged guides
• Restores secure mounting where the original guide has cracked, worn, or detached
• Works with the TV's existing brackets and fasteners to re-establish correct component travel

• Disconnect power and place the TV face-down on a soft, flat surface before beginning
• Remove only the necessary back or trim panels to access the guide; keep fasteners organized
• Use basic hand tools; avoid forcing parts—inspect mating surfaces for damage
• Follow the manufacturer service manual for disassembly/reassembly and safety procedures

Rail guide assembly for refrigerator drawers. Ensures smooth drawer operation and proper alignment. Replace if cracked, broken, or worn to restore stability.

Supports and guides your refrigerator drawer for smooth opening and closing. Replace if drawer sticks, misaligns, or won't seal. Confirm fit with model number.

Slide rail for fresh food tray in refrigerator. Mounts on right side to guide tray movement. Replace if cracked, warped, bent, or broken from wear.

Replacement drawer rail guide for bottom-mount refrigerators. Guides drawer smoothly along track. Replace if cracked, broken, or causing uneven sliding.

Replacement mounting screw for refrigerator panels, trim, and components. Secures loose or missing fasteners to reduce vibration and keep parts in place.

Mounting screw secures panels, brackets, and interior components in your refrigerator. Replace stripped, missing, or damaged fasteners to prevent rattling.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Plastic cover that conceals the top hinge mechanism on your refrigerator door. Replace if cracked, broken, discolored, or missing for a clean look.

Replacement name plate for your bottom-mount refrigerator. This label attaches to the exterior and displays model information. Needed when original is faded, peeling, or missing.

Replace a cracked, loose, or missing freezer door handle on your bottom-mount refrigerator. Restores secure grip and factory appearance to the door.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Door foam assembly for refrigerators. Installs inside the door panel to provide insulation. Replace if foam is cracked, compressed, or missing.

Complete door assembly for bottom-mount refrigerators. Replaces cracked, damaged, or warped doors that compromise seal integrity and appearance.

Molded compartment that fits into the refrigerator door to hold the home-bar area. Replace if cracked, broken, or missing to restore storage space.

Secures the door handle firmly to your refrigerator door. Replace this bracket assembly if it's cracked, stripped, or causing handle wobble or misalignment.

Seals the Home Bar door-in-door panel to prevent warm air leaks, condensation, and temperature swings. Replace if cracked or loose. Confirm fit by model.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

This is a drawer guide that serves as a divider inside a refrigerator freezer drawer, helping organize stored items and allowing the drawer to slide smoothly on its track. It mounts inside the freezer compartment and keeps the drawer aligned during opening and closing. Replace this part if the freezer drawer is difficult to slide, sits unevenly, or if the original guide is cracked or broken.

Front cover panel for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior covers. Restores appearance and protects components.

Refrigerator front cover assembly that installs on the exterior of your appliance. Replace if cracked, broken, or damaged to restore appearance.

Replacement door basket for refrigerator doors. Restores storage space for bottles and small items. Replaces cracked, broken, or missing door bins.

Direct-fit replacement door bin that restores door storage for bottles and jars. Replaces cracked, broken, or missing bins to keep contents secure.

Chipped or cracked dispenser lever? This cover protects the mechanism and restores a clean pressing surface. Simple snap-on installation in minutes.

Replacement door bin for refrigerator. Mounts on the door to hold bottles, condiments, and small items. Replace if cracked, broken, or missing.

Replace a cracked, broken, or missing door basket to restore organized storage on your refrigerator door. This bin mounts inside the door to hold bottles and condiments securely in place.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Secures and supports the bottom door pivot point. Replace when doors sag, rub, or fail to seal evenly. Restores proper alignment and smooth operation.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replace a worn, broken, or missing refrigerator door handle. This assembly mounts to the fridge door to restore a secure grip and finished appearance.

Replace your broken, cracked, or missing refrigerator door handle. This assembly installs on the door exterior for a secure grip and smooth operation.

Secures and aligns the rail assembly in your refrigerator. Replace this connector if it's cracked, broken, or missing to restore proper fit.

Restores smooth drawer movement in your refrigerator. Replace when drawers stick, wobble, or become misaligned. Confirm fit with your model number.

Replaces a broken or worn guide rail that keeps your refrigerator drawer aligned and sliding smoothly. Restores proper tracking if rails are cracked or missing.

Supports and guides refrigerator or freezer drawers for smooth opening and closing. Replace this rail if yours is cracked, broken, or causing drawer misalignment.

Replacement drawer slide rail for refrigerators. Installs on the drawer assembly to guide smooth gliding. Replace if cracked, bent, or worn from use.

Freezer drawer slide rail for refrigerators. Installs inside the freezer compartment to support smooth drawer operation. Replace if cracked or broken.

Supports and guides the lower freezer drawer for smooth opening and closing. Replace if rail is cracked, broken, or drawer no longer glides properly.

Left-hand rail end cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps on drawer rail ends. Secures and protects rail edges.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Right-side rail cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps that cover the drawer rail ends for a finished look.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Plastic support bracket that secures refrigerator shelves in place. Replace if cracked, broken, or missing to restore proper shelf stability.

This center hinge assembly replaces the middle door hinge on compatible French-door refrigerators to restore proper door alignment and smooth opening. It helps prevent sagging, binding, and air leaks caused by a worn or damaged hinge. What it does:

• Supports and aligns the upper/lower refrigerator doors for correct sealing
• Enables smooth pivoting of the door to open and close without binding
• Corrects uneven gaps or door sag that can cause cooling loss or excessive wear
• Replaces a bent, cracked, or worn hinge that may cause noisy operation

• One center hinge assembly

• Remove power and empty the door(s) before beginning work; follow manufacturer service instructions
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage
• Inspect surrounding trim and fasteners; replace any worn screws or bushings as needed

Fix sagging or misaligned refrigerator doors with this center hinge assembly. Restores proper door pivot support and eliminates uneven gaps or binding.

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Restores tension to your refrigerator door hinge for smooth operation. Replace this spring if your door sags, won't hold position, or shows wear.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.

Fix dispenser drips and spills with this refrigerator dispenser funnel. Guides water flow cleanly to prevent messes. Simple 5-minute installation.

Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.

Replace a cracked or broken dispenser cover on your refrigerator. This cover protects internal dispenser components and restores the clean appearance.

Display cover assembly that protects and houses the control panel interface on your refrigerator. Replace if cracked, broken, or discolored. Snaps into place.

Control buttons not responding or cracked? This button assembly restores full control panel function on bottom-mount refrigerators. Moderate DIY repair.

Fix unresponsive or broken control panel buttons with this refrigerator button assembly. Restores reliable input and finished appearance to your control panel.

Replaces a broken, cracked, or missing water dispenser button on your refrigerator. This snap-on part installs on the dispenser housing panel.

Refrigerator door handle assembly for models with decorative exterior finish. Replace if handle is cracked, broken, or buttons have fallen off.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Freezer not cooling or building excessive frost? This evaporator coil assembly absorbs heat to maintain proper temperatures. Restores effective cooling.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

The Thermistor Assembly, PTC is an OEM part for LG refrigerators. Located within refrigerator compartments, the thermistor monitors interior temperatures sending signals to the control board. It contains a temperature-sensitive resistor to provide precise feedback on cooling needs. This feedback allows the refrigeration system to maintain consistent temperatures across all food storage areas. 

The causes of thermistor issues arise from normal component degradation, impacts, water damage, and manufacturing defects affecting sensor accuracy.

Symptoms of a bad Thermistor Assembly include:

• Fluctuating or inaccurate temperature readings  
• Compartments failing to maintain proper cooling levels
• Frost or condensation builds up inside
• Repeated Auto Defrost error messages

This genuine LG replacement preserves dependable monitoring for balanced refrigeration control. Keeping food fresher longer and suitable for Sears/Kenmore refrigerators with LG components.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Refrigerator not cooling evenly or making loud fan noise? This air guide directs airflow from the blower to restore proper cooling. Simple 15-minute fix.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Cosmetic cover panel for refrigerator home bar compartment. Replaces cracked, broken, or missing covers that affect appearance and door aesthetics.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Front cover assembly for refrigerators. Replaces cracked, broken, or missing exterior panel. Restores clean appearance to your appliance front.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.

This is a temperature sensor assembly that monitors the internal temperature of the refrigerator compartment and relays readings to the control board. It helps regulate cooling cycles and defrost timing to maintain proper temperatures. Replace this sensor if your refrigerator is running too cold, too warm, not defrosting properly, or displaying error codes related to temperature.

Fix a refrigerator that won't turn off the light when the door closes with this magnetic door switch. Simple DIY repair for most home refrigerators.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Refrigerator motor bracket secures the compressor or fan motor in place. Fixes excessive vibration or rattling noises. Moderate DIY repair.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.