Parts for Lg LFXS30766D/01: Case Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This replacement door handle restores a secure grip and proper door operation on compatible refrigerators. Durable and contoured to match factory styling, it replaces cracked, loose, or broken handles for a safer, finished look. What it does:

• Provides a firm, ergonomic grip to open and close the refrigerator door
• Replaces cracked, damaged, or loose handles that affect door usability
• Restores the appliance's factory appearance and user comfort
• Helps prevent further damage from using a compromised handle

• Power off and unplug the appliance or disconnect power at the breaker before installation to avoid electrical risk
• Use appropriate hand tools; support the door during removal/installation to prevent injury or damage
• Follow the manufacturer service manual or on-page model fitment for proper screw locations and torque

The Drain Pipe Assembly is an OEM replacement part for LG refrigerators. It is a plastic tubing system that collects and removes liquid condensation from evaporator coils. Proper drainage is crucial to minimizing frost buildup and ensuring optimal cooling of food storage areas. 

Symptoms of a bad drain pipe assembly include:

• Excessive frost or ice accumulation inside the refrigerator
• Puddling or leaks detected near evaporator housing
• Slow draining allowing water to pool versus emptying fully
• Cracks or breaks in the tubing prevent complete fluid removal

Causes are typically mineral sediment clogging drainage paths or deteriorating plastic from constant use. This OEM LG replacement pipe restores reliable condensate removal to maintain peak efficiency.

This OEM LG part is also compatible with Sears/Kenmore. 

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This is a customized screw used to secure components in LG appliances. It replaces a worn or missing fastener to restore proper assembly and reduce rattling or loose panels. What it does:

• Secures panels, brackets, or small components in the appliance chassis
• Helps stop vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to restore safe, stable assembly
• Matches OEM fit for the specific mounting point it was made for

• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance-specific safety procedures before servicing

This duct assembly routes exhaust air from the dryer and provides adjustable airflow direction for proper venting. It restores correct airflow and helps reduce excess lint buildup and drying times when the original duct is damaged or misaligned. What it does:

• Channels dryer exhaust to the external vent to maintain safe, efficient operation
• Features an adjustable/multi-directional outlet for flexible vent routing in tight spaces
• Helps reduce vent restrictions that can cause longer dry cycles or overheating
• Supports proper lint evacuation to lower the risk of lint accumulation near the cabinet

• One duct assembly

• Designed for use with compatible dryer models; verify fit before installation
• Disconnect power and gas (if applicable) and unplug the appliance before servicing
• Use basic hand tools; avoid crushing or kinking the duct during installation
• If venting to the exterior, confirm duct routing and seals are secure to prevent leaks

This multi-outlet vent duct directs exhaust air from the appliance to the home venting system, restoring proper airflow and reducing cooking odors and excess heat. Replaces a damaged or leaking duct to improve ventilation performance. What it does:

• Channels exhaust air from the appliance to the ventilation outlet
• Prevents leaks that can cause poor ventilation, odors, or heat buildup
• Helps reduce rattling or whistling caused by damaged ducting
• Works with the appliance's blower to maintain proper airflow

• Turn off power to the appliance and unplug before beginning work
• Handle sheet-metal edges carefully; wear gloves to avoid cuts
• Use basic hand tools;

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This drum roller replaces a worn support wheel that helps the dryer drum spin smoothly, reducing noise and preventing drum wobble. Restores quieter operation and proper drum alignment. What it does:

• Supports the dryer drum so it rotates evenly during a cycle
• Reduces squealing, scraping, or grinding noises from the drum area
• Helps stop drum wobble and uneven spinning that can cause wear
• Can reduce rubbing or burning smells caused by a seized or worn roller

• Disconnect power before starting any repairs; electric shock hazard.
• Typically accessed by removing the dryer front panel and drum—use care to support the drum.
• Inspect adjoining idler, belt, and rear rollers when replacing for complete repair.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

The Freezer Tray is an OEM part for LG refrigerators. It provides a convenient and organized space for storing frozen foods, ensuring they remain easily accessible and properly arranged within the freezer compartment.

Causes of a bad freezer tray can include cracks or breaks from heavy items, warping due to temperature fluctuations, or general wear from frequent use. A damaged tray can lead to improper storage and difficulty in organizing frozen items.

Symptoms of a bad freezer tray include:

• Cracks or splits in the tray
• Difficulty sliding the tray in and out
• Warping or bending
• Reduced storage capacity

This OEM LG part is also compatible with Sears/Kenmore.

This drawer tray assembly forms the shelf/base that supports a slide-out bin inside the refrigerator. Replace a cracked or warped tray to restore stable food storage and smooth drawer movement.

• Supports a slide-out drawer and food items in the fresh food or freezer section
• Helps drawers track correctly and sit level
• Damage can lead to binding drawers, tilting contents, or reduced storage
• Common signs: cracked plastic, sagging tray, drawer hard to open/close, visible wear

• Disconnect power and remove food from the affected area
• Slide out and remove the drawer(s) resting on the tray
• Lift out the damaged tray; transfer any reusable trim from the original if applicable
• Seat the new tray fully in the supports and reinstall the drawer(s)

The Freezer Tray is an OEM part for LG refrigerators. It provides a convenient and organized space for storing frozen foods, ensuring they remain easily accessible and properly arranged within the freezer compartment.

Causes of a bad freezer tray can include cracks or breaks from heavy items, warping due to temperature fluctuations, or general wear from frequent use. A damaged tray can lead to improper storage and difficulty in organizing frozen items.

Symptoms of a bad freezer tray include:

• Cracks or splits in the tray
• Difficulty sliding the tray in and out
• Warping or bending
• Reduced storage capacity

This OEM LG part is also compatible with Sears/Kenmore.

The Freezer Drawer Assembly is an OEM part for LG refrigerators. It comprises the complete pull-out drawer unit located in the bottom freezer compartment. The assembly includes integrated components like the basket, runners, glides, and heating elements.

Causes of a bad freezer drawer assembly can include heavy use over time leading to wear and tear, accidental impact causing cracks or breakage, and damage to the drawer glides or rails.

Symptoms of a bad freezer drawer assembly include:

• Difficulty opening or sliding the freezer drawer
• Frozen or stuck drawers failing to fully extend
• Loud grinding or screeching noises emitting from the drawer area
• Warping or cracking of plastic drawer components

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Freezer Drawer Assembly is an OEM part for LG refrigerators. It comprises the complete pull-out drawer unit located in the bottom freezer compartment. The assembly includes integrated components like the basket, runners, glides, and heating elements.

Causes of a bad freezer drawer assembly can include heavy use over time leading to wear and tear, accidental impact causing cracks or breakage, and damage to the drawer glides or rails.

Symptoms of a bad freezer drawer assembly include:

• Difficulty opening or sliding the freezer drawer
• Frozen or stuck drawers failing to fully extend
• Loud grinding or screeching noises emitting from the drawer area
• Warping or cracking of plastic drawer components

This OEM LG part can also be used on Kenmore/Sears appliances. 

This shelf net is a replacement mesh shelf for refrigerators that helps keep bottles and small items secured and organized on a fridge shelf. Restores containment for torn or sagging nets. What it does:

• Provides a flexible mesh surface to hold bottles, cans and other items in place
• Prevents small items from falling through or shifting during door access
• Replaces torn, stretched or sagging shelf nets that no longer secure contents
• Helps restore original shelf function and appearance

• Disconnect power or unplug the refrigerator before starting any repair
• Remove food and the affected shelf before replacing the net
• Typically installs by fitting the net into the dedicated shelf frame or clips; for exact instructions
• Wear gloves to avoid sharp edges on shelf frames during installation

This refrigerator glass shelf assembly replaces a broken, cracked or missing interior shelf so you can safely store food and restore usable shelving space. Tempered glass shelf with frame supports everyday fridge organization. What it does:

• Provides a stable, easy-to-clean surface for storing food and containers
• Replaces cracked, chipped or shattered glass shelves that cause leaks or safety hazards
• Prevents items from falling through open shelf openings and helps maintain internal organization
• Fits into existing shelf rails and rests on factory shelf supports

• Disconnect power and remove food before installing to avoid spills and injury
• Handle tempered glass carefully; wear gloves to protect hands during installation
• Slide shelf into existing rails until it seats securely on factory supports
• If shelf support clips or rails are damaged, replace them before installing this shelf

This glass refrigerator shelf assembly replaces a damaged or worn interior shelf to restore stable storage and easy cleaning. It provides a flat, durable surface for organizing food and containers inside the fridge. What it does:

• Replaces a broken, cracked, or chipped interior glass shelf
• Restores a level storage surface for safe stacking of items
• Helps contain spills for easier cleanup and prevents mess from dripping below
• Fits into existing shelf rails or supports to resume normal shelf function

• One refrigerator glass shelf assembly

• Use gloves to avoid cuts when handling broken glass; disconnect power if removing shelves near electrical components
• Slide into the existing shelf supports or clips; no special tools typically required
• Replace damaged supports or clips before installing the shelf
• Dispose of broken glass safely and follow local recycling/disposal rules

This glass refrigerator shelf assembly replaces a damaged or worn interior shelf to restore stable storage and easy cleaning. It provides a flat, durable surface for organizing food and containers inside the fridge. What it does:

• Replaces a broken, cracked, or chipped interior glass shelf
• Restores a level storage surface for safe stacking of items
• Helps contain spills for easier cleanup and prevents mess from dripping below
• Fits into existing shelf rails or supports to resume normal shelf function

• One refrigerator glass shelf assembly

• Use gloves to avoid cuts when handling broken glass; disconnect power if removing shelves near electrical components
• Slide into the existing shelf supports or clips; no special tools typically required
• Replace damaged supports or clips before installing the shelf
• Dispose of broken glass safely and follow local recycling/disposal rules

This rail holder is a small replacement mounting clip that secures a rail or guide in place so racks or sliding components stay aligned and operate smoothly. It restores proper fit and reduces shifting or rattling during use. What it does:

• Secures the appliance rail or guide to prevent the rail from coming loose
• Keeps racks or sliding parts aligned for smooth movement
• Reduces vibration and rattling caused by a loose rail
• Helps prevent minor wear from misalignment or shifting components

• Disconnect power (or unplug) and remove any obstructing parts before replacing the holder
• Replacement typically requires basic hand tools; retain all fasteners and note orientation
• Inspect mating rail and fasteners for damage; replace any worn parts to ensure a secure fit

The Slide Rail is an OEM part for LG refrigerators. This part allows the smooth and stable operation of the freezer drawer, allowing it to slide in and out. The slide rail supports the weight of the drawer and its contents, facilitating easy access to frozen items while maintaining proper alignment. The rail measures approximately 16” x 2”

Causes of a bad slide rail can include wear and tear from frequent use, physical damage from overloading the drawer, and the accumulation of debris or ice buildup that can obstruct the sliding mechanism.

Symptoms of a bad slide rail for the freezer drawer include:

• Difficulty in sliding the freezer drawer in and out
• The freezer drawer not staying in place or coming off the rails
• Unusual noises such as grinding or squeaking during movement
• Visible damage, bending, or rust on the rail

This OEM LG part is also compatible with some Kenmore models.

The Rail Guide Assembly is an OEM replacement part for LG bottom-mount refrigerators. It contains telescopic extension rails and channel brackets that accommodatingly glide freezer and fridge shelves in and out with simplicity. This assembly facilitates effortless access to every stored item.

Causes of part malfunction relate to prolonged retraction/extension stressing roller bearings and metal rails to the point of fatigue cracks or binding issues hindering smooth sliding.

Symptoms involve:

• Shelves that resist extension or fail to fully retract into fridge cavities
• Grating noises and vibrations emerging from misaligned or strained rails
• Inconvenient access as capacity-flexible shelving gets restricted

This OEM replacement part is compatible with LG and Kenmore bottom-mount refrigerators.

This replacement fresh food tray assembly sits in the refrigerator compartment to support and organize items or bins. Replace a cracked, warped, or missing tray to restore a level surface and smooth, secure storage.

• Provides a rigid, level surface in the fresh food section
• Seats into existing guides/rails for proper fit and smooth operation
• Helps keep contents organized and prevents tipping or spills
• Common symptoms: cracks, chips, broken tabs, warping, won't seat or slide correctly, sagging surface

• Empty the area and remove the damaged tray; wear cut-resistant gloves if plastic is cracked
• Clear any broken fragments and clean the supports before installing
• Align with the guides and slide/seat fully; do not force into place
• Load evenly and avoid overloading to prevent repeat damage

The Freezer Drawer Rail Assembly is an OEM part for LG refrigerators. This assembly includes the rails that support and guide the freezer drawer, allowing it to slide in and out smoothly for easy access to frozen foods.

Causes of a bad freezer drawer rail assembly can include wear and tear over time, buildup of ice or debris, or damage from excessive force or impact. A compromised rail assembly can hinder the drawer's movement and affect the overall functionality of the freezer.

Symptoms of a bad Freezer Drawer Rail Assembly include:

• Difficulty opening or closing the freezer drawer
• The drawer not staying aligned or on track
• Unusual noises when operating the drawer
• Visible damage or wear on the rails

This OEM LG part is also compatible with Sears/Kenmore.

This right-side Freezer Basket Support Rail is an OEM part for LG refrigerators. Located inside the freezer compartment, it provides elevated storage shelves for ice cream, frozen vegetables, meats, and more above the freezer floor.

Causes of a bad support rail can include damages such as cracks or breaks that compromise its load-bearing ability over years of use. Sharp freezer temperatures cause constant contraction and expansion.

Symptoms of a bad support rail include:

• Baskets or containers unstable and prone to tipping
• Reduced storage capacity within the freezer
• Safety concerns if a cracked rail were to fully collapse

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Freezer Basket Support Rail is an OEM part for LG refrigerators. This component is essential for supporting and guiding the freezer basket, allowing it to slide in and out smoothly. The rail measures approximately 13 x 2 inches.

Symptoms of a failing Freezer Basket Support Rail include:

• Difficulty sliding the freezer basket in and out
• Unusual noises such as grinding or squeaking when moving the basket
• The basket becoming misaligned or tilting when pulled
• Visible wear or damage to the rail

Causes of a bad support rail often include mechanical stress from overloading the basket, frequent use which can wear down the material, or accidental damage during cleaning or rearranging items within the freezer.

This OEM LG part is also compatible with Sears/Kenmore.

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This tray cover assembly replaces a damaged cover above a storage tray or drawer. It restores a flat, supportive surface and smooth operation, keeping the interior organized and preventing items from tipping or the drawer from binding.

• Forms the top cover/shelf over a tray or drawer and supports items stored above
• Helps align the tray/drawer so it opens and closes smoothly
• Replaces cracked, warped, or broken covers that cause sagging or jams
• Ideal when the existing cover is visibly damaged or unstable

• Disconnect power and remove contents from the area before servicing
• If present, lift out any removable glass insert before removing the frame
• Release tabs or screws, remove the old cover, and transfer any reusable components
• Seat the new assembly fully and reinstall any inserts and contents

This Vegetable Tray Assembly is the refrigerator's crisper drawer for the fresh food section. Replace a cracked or missing bin so produce stores neatly and the drawer slides properly in its tracks.

• Provides a dedicated bin for fruits and vegetables in the fresh food compartment
• Slides on the crisper tracks beneath the shelf/cover for easy access
• Restores proper fit and smooth operation of the drawer
• Common reasons to replace: cracked or broken bin, broken tabs/lip, drawer won't slide correctly, or a missing drawer

• Remove contents, pull the old drawer out to the stop, then lift the front and pull free from the rails
• Align the new drawer with the tracks and slide it fully into place
• No tools typically required; handle plastic carefully and do not force parts

Restore a sturdy, easy-sliding produce bin with this replacement vegetable crisper drawer. It keeps fruits and vegetables organized and, when used with the matching cover, helps support proper humidity conditions in the refrigerator. What it does:

• Provides a dedicated bin for storing fresh produce under the crisper shelf
• Slides on the factory rails for smooth opening and closing
• Works with the crisper cover/humidity control to help manage moisture
• Common failure symptoms: cracked or broken bin, damaged corners/tabs, drawer sticks, falls off track, or won't stay seated

• 1 vegetable crisper drawer (tray assembly)

• Unplug the refrigerator before servicing
• Remove contents, then slide the old drawer straight out; remove the shelf above if needed
• Transfer any reusable inserts from the old bin if applicable
• Align the new drawer on the rails and slide it in fully; verify smooth operation

This vegetable crisper drawer replaces a cracked or missing bin in your refrigerator. It restores smooth sliding access and organized produce storage, keeping items contained and easy to reach.

• Provides dedicated storage space for fruits and vegetables in the fresh food section
• Slides on the drawer rails for easy access to contents
• Helps contain spills and prevent items from falling into the compartment
• Typical symptoms include cracks, broken tabs, difficulty sliding, or the drawer falling off the rails

• Remove items and pull the old drawer straight out to release it from the rails
• Inspect and clean the shelf tracks/rails before installing the new drawer
• Align the drawer with the rails and push in gently until fully seated
• Handle carefully; avoid forcing or overloading to prevent damage

This replacement cover assembly encloses and protects the unit's internal components while restoring a clean, finished exterior. Install a new cover when the original is cracked, dented, or no longer secures properly to ensure a solid fit and safe operation. What it does:

• Forms the exterior panel that shields internal components from dust, debris, and accidental contact
• Restores a clean appearance and supports proper alignment with adjoining panels
• Helps reduce vibration or rattling from a loose or damaged panel
• Typical symptoms include cracks, dents, broken mounting tabs, gaps, or poor fitment

• One cover assembly

• Disconnect power before servicing
• Remove perimeter screws/clips securing the original cover; retain fasteners for reuse
• Transfer any brackets, cushions, or labels from the old cover if needed
• Position the new cover, ensure edges are fully seated, and tighten fasteners evenly

A replacement guide assembly that secures and aligns internal TV components so the display and moving parts track properly. Restores fit and reduces rubbing or loose movement from worn guides. What it does:

• Positions and supports internal panels or sliding components to maintain proper alignment
• Helps prevent binding, noise, or uneven movement from loose or damaged guides
• Restores secure mounting where the original guide has cracked, worn, or detached
• Works with the TV's existing brackets and fasteners to re-establish correct component travel

• Disconnect power and place the TV face-down on a soft, flat surface before beginning
• Remove only the necessary back or trim panels to access the guide; keep fasteners organized
• Use basic hand tools; avoid forcing parts—inspect mating surfaces for damage
• Follow the manufacturer service manual for disassembly/reassembly and safety procedures

This rail guide assembly supports and guides a sliding refrigerator drawer so it opens and closes smoothly. Replacing a worn guide can restore proper glide, alignment, and sealing for reliable everyday use.

• Mounts to the slide track to guide the pull-out drawer
• Keeps the drawer level and aligned during opening and closing
• Helps ensure the drawer closes fully for proper sealing
• Common symptoms: drawer binds or rubs, feels rough, won't close flush, or shows cracks/wear on the guide

• Disconnect power and remove the affected drawer/basket before starting
• Remove screws or release tabs to detach the old guide; note orientation
• Install the new guide and secure with existing hardware; ensure slides move freely
• Reinstall the drawer and verify smooth travel and full closure before restoring power

The Fresh Food Tray Rail is an OEM replacement part for LG refrigerators. It allows the right side of the fresh food tray to slide in and out. 

Causes of a bad fresh food tray rail can include warping, cracking, or bending from heavy shelf loads over time compromising its structural integrity.

Symptoms of a bad fresh food tray rail include:

• Sagging or sliding shelves that no longer fit securely  
• Gaps allowing cold air leakage and loss of chilled temperatures
• Jammed fresh food tray

This genuine OEM LG part is also compatible with some select Kenmore brand models.

This is a replacement mounting screw used to secure appliance panels, trim or components. It restores proper attachment to reduce vibration and rattling and helps keep removable parts firmly in place during operation. What it does:

• Fastens panels, brackets or trim pieces to the appliance frame
• Restores secure fit when original screw is missing, loose, or stripped
• Reduces rattling and vibration caused by loose hardware
• Helps maintain proper alignment of removable covers and control panels

• Disconnect power and water before starting any repair
• Verify size and thread match the original screw before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten — overtightening can strip threads or crack plastic parts
• Keep small parts away from children and pets

A single mounting screw used to secure panels, brackets, or components in place so assemblies stay stable during normal appliance use. Simple replacement for stripped or missing fasteners. What it does:

• Secures panels, trim, brackets or interior components to prevent rattling or movement
• Restores proper fit and alignment after service or accidental damage
• Helps reattach parts removed during maintenance or part replacement
• Small, durable fastener designed for appliance interior mounting applications

• Use the correct screw driver or bit to avoid stripping the head
• Match screw length and thread engagement to the original location before tightening
• Tighten until snug—do not overtighten to avoid cracking plastic or damaging threads
• Disconnect power and follow appliance safety procedures before performing repairs

The Freezer Door Gasket is an OEM replacement part for LG refrigerators. It is designed to create a tight seal around the freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering. This ensures the freezer operates efficiently and keeps food frozen at the proper temperature.

Over time, freezer door gaskets can wear out or become damaged due to repeated opening and closing, exposure to cold temperatures, or the buildup of dirt and debris. A faulty gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The door not sealing properly
• Increased energy use
• Food not staying properly frozen

This OEM LG part is also compatible with Sears/Kenmore models.

A decorative door trim handle that restores the look and grip of your appliance door. Replaces scratched, cracked or worn trim so the door looks finished and is easier to open. What it does

• Provides the exterior trim/handle piece used to open and close the appliance door.
• Restores a secure grip when original trim is cracked, broken or loose.
• Improves appearance by replacing scratched or dented decorative trim.
• Works with the factory mounting points for a direct-fit replacement.

• One decor handle (trim) piece as shown.

• Disconnect power (and water supply for refrigerators with water/ice) before starting.
• Remove any trim covers or screws holding the old handle; handle may snap or screw off depending on model.
• Align replacement trim to factory mounting points and secure with original fasteners.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This freezer door handle is a direct replacement designed to restore a secure grip and the factory appearance of your refrigerator freezer door. Use it to replace a cracked, loose, or missing handle so the door opens reliably. What it does:

• Provides a secure handhold for opening and closing the freezer door
• Replaces cracked, broken, or loose handles that interfere with normal use
• Restores the finished look of the freezer door for a factory appearance
• Matches OEM fit and mounting points for straightforward replacement on compatible models

• Remove food and support the door before removing the old handle to prevent damage or injury
• Keep original fasteners and trim; reinstall in the same orientation for proper fit
• Use appropriate hand tools and avoid overtightening screws to prevent cosmetic damage

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.

Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.

Symptoms of a bad French door mullion include:

• The mullion not folding or unfolding correctly
• Visible cracks or damage to the mullion
• Warm air entering the refrigerator, affecting cooling
• Increased energy consumption

This OEM LG part is also compatible with Sears/Kenmore models.

This drawer guide is the sliding rail that helps a refrigerator/freezer drawer open and close smoothly and stay aligned. It restores stable drawer movement and prevents sticking, sagging, or drawers coming off the track. What it does:

• Guides and supports the drawer as it slides in and out
• Keeps the drawer aligned to prevent binding or uneven movement
• Reduces drawer sag and helps prevent accidental removal
• Restores smooth operation when original guide is cracked, worn, or broken

• One drawer guide

• Disconnect power to the appliance before starting any repair
• Remove the drawer per the appliance service instructions to access the guide
• Replace the guide using the OEM fasteners or clips; keep original mounting hardware unless damaged

This door basket is a direct-fit replacement refrigerator door bin that restores door storage for bottles, jars and other items. It keeps door contents secure and organized so you can use the full door storage again. What it does:

• Replaces a cracked, broken or missing door bin that no longer holds items securely
• Provides stable storage for bottles, condiments and small containers on the refrigerator door
• Restores proper door seal clearance by returning the original bin height and fit
• Helps stop items from falling out when the door is opened or closed

• One refrigerator door basket/bin

• Remove all contents from the old door bin before starting
• Most installations snap into place: align mounting tabs with door slots and press until it clicks
• If screws or clips are present, retain original fasteners and reinstall as needed
• For safety, handle glass/jar contents carefully and avoid forcing parts; unplug the appliance if you will be working inside sealed compartments

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This cover lever replaces a damaged or worn dispenser lever cover to restore a clean, functional surface for pressing the dispenser. Helps keep debris out of the lever area and supports reliable lever actuation. What it does:

• Covers and protects the dispenser lever mechanism from chips, cracks, and debris.
• Provides a smooth contact surface for pressing the dispenser to activate water/ice dispensing.
• Helps prevent leaks or improper actuation caused by broken or warped lever covers.
• Restores cosmetic appearance at the dispenser area when the original cover is cracked or missing.

• Disconnect power and shut off the water supply before beginning any work.
• Removal typically requires accessing the dispenser bezel or door panel—use basic hand tools and retain all fasteners.
• Handle clips and tabs carefully to avoid breakage; test dispenser function after reassembly.

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

Replace a cracked or missing door basket to restore organized, secure storage on your refrigerator door. This bin mounts to the inner door to hold bottles and condiments so items stay put when you open and close the door. What it does:

• Mounts to the door to hold beverages, condiments, and small containers
• Replaces a broken, loose, or missing bin to restore proper fit
• Helps keep items upright and seated on the door tabs when properly installed
• Refreshes the interior appearance with an intact, clean bin

• Includes: 1 refrigerator door basket

• Remove contents, lift the old bin up and off the door mounts
• Align the new basket with the door tabs and press down until fully seated
• Confirm the basket is level and secure before loading items
• Close the door slowly to verify clearance and proper engagement

The Refrigerator Door Shelf is an OEM part for LG refrigerators. It provides additional storage space on the door of the refrigerator, allowing for the organization and easy access of frequently used items such as condiments, beverages, and small containers. It measures approximately 14" x 4" x 4".

Causes of a bad refrigerator door shelf can include general wear and tear from repeated use, overloading the shelf with heavy items, or accidental damage during cleaning or reorganization. Cracks or breakage in the plastic material can also render the shelf unusable.

Symptoms of a bad refrigerator door shelf include:

• Cracked or broken shelf
• Items not staying securely on the shelf
• The shelf not fitting properly into the door brackets
• Difficulty in attaching or removing the shelf

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This lower hinge assembly secures and supports the refrigerator/freezer door at its bottom pivot, restoring proper door alignment and smooth opening. Replaces a worn or damaged hinge to help reduce sagging, rubbing, or uneven sealing. What it does:

• Provides the pivot point and mounting for the bottom of the appliance door.
• Restores correct door alignment to improve door closure and sealing.
• Helps eliminate door sag, binding, or scraping during operation.
• Durable molded/metal construction built to match OEM fit and function.

• Disconnect power and empty/secure the door before starting; prop or support the door to prevent dropping.
• Keep fasteners and alignment shims used during removal for reference; transfer any hardware only if explicitly required.
• Use basic hand tools; follow the appliance service manual for torque and alignment instructions.

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

This door stopper mounts at the hinge to limit the refrigerator door's opening angle and provide a positive stop. Replacing a worn stopper helps protect the hinge, prevent over-swing, and promote a smooth, even door seal.

• Limits door opening at the hinge to prevent overextension
• Helps maintain door alignment and consistent gasket contact
• Reduces impact that can loosen hinges or damage the cabinet
• Common symptoms: door swings too far, clunks at full open, doesn't stop smoothly, or shows visible wear at the stop

• Disconnect power and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners as needed to access the stopper
• Install the new stopper in the same orientation; tighten hardware securely
• Verify door swing and sealing after reassembly

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This handle assembly replaces a worn, broken, or missing refrigerator door handle to restore a secure grip and smooth opening. It mounts to the fridge door to return the appliance to normal use and appearance. What it does:

• Provides a finished, easy-to-grip handle for opening and closing the refrigerator door
• Replaces cracked, loose, or damaged handles that catch or wiggle when used
• Restores proper leverage for safe door operation and prevents further cabinet or trim damage
• Matches OEM fit and mounting points for straightforward replacement

• Disconnect power to the appliance or follow the manufacturer's safety guidance before starting work
• Remove food and any door-mounted items for easier access and to prevent spills
• Use the correct hand tools and avoid overtightening fasteners to prevent handle or door damage

Refrigerator door handle assembly that restores a secure grip and reliable door operation. Ideal replacement for handles that are cracked, loose, or missing, helping the door open and close smoothly and safely. What it does

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces cracked, chipped, broken or loose handles that make the door difficult to operate.
• Restores proper handhold to help prevent slips and accidental drops when accessing the fridge.
• Designed to line up with factory mounting points for a straightforward replacement.

• For safety, unplug the refrigerator or switch off power at the breaker before starting if removal requires access near electrical components.
• Keep original mounting screws and trim; many handle assemblies reuse existing hardware.
• Use basic hand tools (screwdriver, nut driver) and steady support for the door during installation; get assistance if the door is heavy or awkward to handle.

This connector rail secures and aligns the appliance's rail assembly, providing a stable mounting point for associated panels or harnesses. Replacing a worn or broken connector restores proper fit and reduces rattling or looseness. What it does:

• Fastens the rail assembly to the appliance frame to keep panels aligned
• Holds related wiring harnesses or trim in the correct position
• Prevents rail movement that can cause noise or misfit of panels
• Common part to replace when connector is cracked, broken, or missing

• One connector rail

• Disconnect power before starting any repair to avoid shock or injury
• Remove required trim or panels to access the rail; preserve all screws and clips
• Align connector carefully and snap or fasten into place without forcing to avoid breakage
• Ensure wiring harnesses route through the connector are seated and not pinched before reassembly

This guide assembly rail is the replacement drawer slide that restores smooth, stable movement for a refrigerator or appliance drawer. It keeps the drawer aligned and reduces sticking or uneven operation for everyday use. What it does:

• Guides and supports the drawer as it opens and closes to maintain proper alignment.
• Reduces sticking, scraping, and uneven travel caused by worn or damaged rails.
• Helps prevent drawer sagging and improves load stability when pulling out the drawer.
• Works with the factory mounting points and keeps the drawer tracking true.

• One guide assembly rail.

• Disconnect power or follow appliance-specific safety procedures before servicing.
• Remove the drawer or access panel to reach the existing rail; keep fasteners for reuse unless replacement required.
• Compare the new rail to the old part to ensure fit and orientation before installing.
• If fasteners are damaged or missing, replace with OEM-specified hardware.

This slide rail supports and guides a refrigerator/freezer drawer so it opens and closes smoothly and stays aligned. Replaces a worn or broken rail to restore proper drawer movement and prevent sagging. What it does:

• Guides the drawer on a smooth track for consistent opening and closing
• Restores proper alignment if the drawer sticks, drags, or tilts
• Supports drawer weight to prevent sagging or uneven movement
• Works with existing mounting points and fasteners for a direct replacement

• One slide rail

• Disconnect power to the appliance and remove the drawer before installing
• Compare the old rail to the new part for correct orientation and hardware
• Install using the appliance's original screws; avoid over-tightening to prevent damage
• Test drawer movement after installation and re-check fasteners for security

This guide assembly keeps a sliding appliance drawer or rack aligned for smooth, reliable movement and helps prevent sagging or derailment. It restores proper tracking so the drawer/rack opens and closes without binding. What it does:

• Guides and supports a sliding drawer or rack so it stays aligned during use
• Reduces binding, sagging, or derailment when loading or pulling the drawer/rack
• Eliminates scraping or grinding noises caused by a worn guide
• Helps restore smooth, even motion and proper engagement with the slide mechanism

• One guide assembly

• Disconnect power before starting any repair
• Remove the affected drawer/rack to access the guide; keep track of fasteners
• Align the guide with the slide channel and secure per the OEM fastening points; some designs snap in while others use screws
• If mounting hardware is worn or missing, replace with OEM-specified fasteners for safe operation

A replacement slide rail that restores smooth, stable drawer operation and proper alignment. Designed to support the appliance drawer as it opens and closes, it helps reduce sticking, sagging, and uneven movement. What it does

• Provides a guided track for the drawer to slide smoothly in and out
• Restores proper alignment to prevent drawer sagging or binding
• Reduces noise and sticking during operation
• Maintains load support for safe, consistent drawer movement

• Requires basic hand tools; follow for access and disassembly
• Power off and unplug the appliance before starting any repair
• Remove adjacent trim or components carefully to avoid damage
• Replace rails in matched pairs for best performance

The Freezer Drawer Rail is an OEM component for select LG refrigerators.  Its operatation allows access to frozen foods.  

Causes of a bad rail could include debris accumulation, ice buildup, or physical damage that hinders smooth sliding. Over time, continuous usage may also cause wear of moving parts.

Symptoms of a failed freezer drawer rail include: 

• Resistance or stiffness when opening/closing drawers
• Noisy, squeaking, or grinding sounds  
• Drawers that do not fully extend or retract
• Drawers detaching from the rail mechanism

This OEM LG rail is compatible with LG and Kenmore French door refrigerator models.

The Freezer Drawer Rail is an OEM component for LG French door refrigerators featuring bottom drawer designs. It provides smooth gliding support for the refrigerator's lower freezer storage compartment.

Common causes involve typical fatigue damage concentrating stresses at sensitive drawer guide interfaces.

Symptoms include:

• Drawer difficult to fully extend or retract
• Noises or binding during operation 
• Reduced storage organization from impaired drawer support

This OEM LG part can also be used on Kenmore/Sears appliances.

Note: Left Rail Cap

Note: Right Rail Cap 

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This center hinge assembly replaces the middle door hinge on compatible French-door refrigerators to restore proper door alignment and smooth opening. It helps prevent sagging, binding, and air leaks caused by a worn or damaged hinge. What it does:

• Supports and aligns the upper/lower refrigerator doors for correct sealing
• Enables smooth pivoting of the door to open and close without binding
• Corrects uneven gaps or door sag that can cause cooling loss or excessive wear
• Replaces a bent, cracked, or worn hinge that may cause noisy operation

• One center hinge assembly

• Remove power and empty the door(s) before beginning work; follow manufacturer service instructions
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage
• Inspect surrounding trim and fasteners; replace any worn screws or bushings as needed

This center hinge assembly replaces the factory door pivot and restores proper door alignment and smooth opening. It supports the refrigerator door at the center hinge point to help stop sagging, binding, or uneven gaps. What it does:

• Replaces the center pivot point that supports and guides the door
• Restores correct door alignment and even sealing to help maintain cooling efficiency
• Reduces door sag, sticking, and noise caused by worn hinge parts
• Allows the door to open and close smoothly when operating normally

• Disconnect power to the appliance and remove food from affected door before starting.
• Support or remove the door to avoid injury or damage; the door can be heavy.
• Use appropriate hand tools and follow torque guidelines in the OEM instructions.

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This hinge secures and guides a refrigerator door for reliable opening and closing. It restores proper door alignment to help maintain an airtight seal and prevent sagging or rubbing. What it does:

• Supports the refrigerator door and attaches it to the cabinet frame
• Guides smooth door movement and maintains alignment
• Helps prevent door sag, uneven gaps, and items catching when opening/closing
• Reduces rubbing, scraping or abnormal door noise caused by a worn hinge

• Disconnect power and remove food from the door before starting; support the door to prevent dropping
• Use the factory mounting screws and follow OEM torque and alignment steps
• Check door position and seal after installation; adjust hinge mounting if necessary

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

The Ice Dispenser Door Assembly is an OEM part for LG refrigerators. This assembly includes the door and the necessary components that control the opening and closing of the ice dispenser chute. It plays a vital role in maintaining the efficiency of the ice dispensing system by ensuring that the ice chute remains sealed when not in use, preventing warm air from entering the freezer compartment.

Causes of a bad ice dispenser door assembly can include wear and tear from frequent use, damage from ice buildup, or issues with the mechanical or electronic components that control the door.

Symptoms of a bad ice dispenser door assembly include:

• Ice dispenser door not opening or closing properly
• Frost or ice buildup around the ice chute
• Warm air leaking into the freezer, affecting its temperature
• The ice dispenser not functioning efficiently

This OEM LG part is also compatible with Sears/Kenmore.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This replacement spring restores proper tension to a microwave oven door hinge so the door opens and closes smoothly and holds position. It's a direct-fit part that helps eliminate sagging or uneven door movement. What it does

• Replaces a worn or broken hinge spring to restore proper door tension and alignment
• Helps prevent door from dropping open or not staying closed securely
• Supports smooth, controlled door opening and closing motions
• Addresses symptoms such as a sagging door, uneven closing, or loose-feeling hinge

• One replacement hinge spring (quantity: 1)

• Disconnect power to the appliance before attempting any service to avoid electrical shock
• Access may require removing the outer door panel or control panel; follow OEM disassembly instructions
• Handle the spring carefully—springs can be under tension and may release suddenly

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Right Ice Door Spring is an OEM part for LG refrigerators. This part provides the necessary tension to ensure the ice door opens and closes smoothly, maintaining the seal to keep the ice compartment cold and efficient.

Causes of a bad ice door spring can include wear and tear over time, loss of tension due to repeated use, or physical damage from accidental mishandling.

Symptoms of a bad Right Ice Door Spring include:

• Ice door not staying closed
• Difficulty in opening or closing the ice door
• Unusual noises when the ice door operates
• Increased frost buildup around the ice compartment

This OEM LG part is also compatible with some Kenmore models.

The Dispenser Lever Retainer is an OEM part for LG refrigerators. This part secures the dispenser lever in place, this part ensures the smooth operation of the water and ice dispenser. 

Causes of a bad Dispenser Lever Retainer can include normal wear and tear from repeated use, accidental damage, or deterioration of the material over time.  

Symptoms of a bad Dispenser Lever Retainer include:

• The dispenser lever is loose or wobbly
• Difficulty in dispensing water or ice
• The lever does not return to its original position after use
• Unintended activation or difficulty in activating the dispenser

This OEM LG part is also compatible with some Kenmore models.

The Left Ice Door Spring is an OEM part for LG refrigerators. It is responsible for providing the necessary tension to ensure the ice door closes properly after dispensing ice. This spring helps maintain an airtight seal, preventing warm air from entering the ice compartment and ensuring efficient operation of the ice maker.

Over time, the ice door spring can become worn out, lose tension, or break due to repeated use or accidental damage. A faulty spring can result in the ice door not closing correctly, which can lead to issues with ice production and storage.

Symptoms of a bad left ice door spring include:

• The ice door not closing or sealing properly
• Warm air entering the ice compartment
• Excessive frost buildup around the ice dispenser
• The ice door feeling loose or not springing back into place

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Ice Dispenser Door Lever is an OEM part for LG refrigerators. This part is responsible for operating the ice dispenser door, allowing ice to be dispensed from the ice maker when the lever is pressed.

Causes of a bad part can include mechanical wear and tear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the lever's motion.

Symptoms of a bad Ice Dispenser Door Lever include:

• Failure of the ice dispenser door to open when the lever is pressed
• The door opening erratically or becoming stuck
• Difficulty in dispensing ice due to the improper operation of the door

This OEM LG part is also compatible with some Kenmore models.

This button assembly replaces a damaged or unresponsive control-panel button cluster to restore reliable button operation and user control. It fits into the appliance's front control panel and connects to the main control board. What it does:

• Replaces cracked, worn, or missing control-panel buttons
• Restores button responsiveness and reliable input to the control board
• Helps resolve symptoms like sticking, intermittent, or non-working buttons
• Maintains the original panel layout and tactile feedback

• Disconnect power (unplug appliance or switch off breaker) before beginning
• Access may require removing the control-panel trim or console—keep fasteners organized
• Handle the assembly carefully to avoid damage to the button contacts or wiring
• Test button function before reassembling the entire console

This button assembly replaces the set of push buttons on the appliance control panel to restore reliable input and a finished appearance. Replaces worn, broken, or unresponsive control buttons so the unit accepts user commands correctly. What it does:

• Provides the user-facing push buttons used to select cycles, options, and start/stop functions
• Restores physical button action for hard-to-press, stuck, or missing buttons
• Helps resolve intermittent or non-responsive control inputs caused by damaged button hardware
• Maintains the original fit and appearance of the control panel

• One button assembly

• Disconnect power before beginning any repair
• Access typically requires removing the control console or top panel—keep fasteners and clips organized
• Handle the assembly carefully to avoid damaging plastic tabs or button contacts
• Test button operation before fully reassembling the console

The Water Dispenser Button is an OEM part for LG refrigerators. This part allows users to easily dispense water with a simple press. It's directly connected to the electronic control system of the refrigerator, ensuring that when pressed, it signals the refrigerator to activate the water dispenser. 

Causes of damage to the Water Dispenser Button often involve repeated use, which can wear down the mechanical components, or impact damage from objects hitting the button.  

Symptoms of a bad Water Dispenser Button include:

• The button sticking or failing to spring back after being pressed.
• No water being dispensed when the button is pressed, indicating a possible fault in the signal transmission to the control system.
• The button feeling loose or falling off, suggesting that the mounting or connecting components may be damaged.

This OEM LG part is also compatible with some Kenmore models.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

This evaporator assembly is the sealed coil component that removes heat from the freezer section, helping maintain proper cold temperatures and consistent food preservation. It replaces a worn or damaged evaporator to restore effective cooling. What it does:

• Absorbs heat from inside the freezer compartment so the refrigerant can carry it away
• Supports proper airflow through the freezer evaporator compartment for consistent cooling
• Commonly used when the freezer is not reaching temperature or shows frost/freeze buildup on the evaporator area
• Works with the appliance's defrost system and refrigeration components to maintain correct operation

• Disconnect power before servicing; handle components carefully to avoid sharp fin injury
• Inspect surrounding gaskets, insulation, and mounting hardware during replacement and replace as needed
• Test defrost and fan operation after installation to confirm proper system function

The Thermistor Assembly, PTC is an OEM part for LG refrigerators. Located within refrigerator compartments, the thermistor monitors interior temperatures sending signals to the control board. It contains a temperature-sensitive resistor to provide precise feedback on cooling needs. This feedback allows the refrigeration system to maintain consistent temperatures across all food storage areas. 

The causes of thermistor issues arise from normal component degradation, impacts, water damage, and manufacturing defects affecting sensor accuracy.

Symptoms of a bad Thermistor Assembly include:

• Fluctuating or inaccurate temperature readings  
• Compartments failing to maintain proper cooling levels
• Frost or condensation builds up inside
• Repeated Auto Defrost error messages

This genuine LG replacement preserves dependable monitoring for balanced refrigeration control. Keeping food fresher longer and suitable for Sears/Kenmore refrigerators with LG components.

The Overload Compressor is an OEM part for LG refrigerators. This part protects the refrigerator's compressor from overheating and potential damage by acting as a safety device. It works by monitoring the compressor's electrical current and temperature. If the compressor operates under conditions that could lead to overheating or overcurrent, the overload protector will cut off the power to the compressor, allowing it to cool down before potentially restarting.

Causes of damage to the Overload Compressor can include power surges, electrical faults within the refrigerator, or a malfunctioning compressor that requires more current than usual to operate. 

Symptoms of a bad Overload Compressor include:

• The refrigerator not cooling properly or not cooling at all
• The compressor failing to start, indicated by a clicking sound coming from the back of the refrigerator where the compressor is located.
• The refrigerator or freezer section warming up

This OEM LG part is also compatible with some Kenmore models.

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This fan guide directs airflow from the blower/fan assembly to improve cooling and airflow routing in the appliance. Replaces a cracked or missing guide to restore proper airflow and reduce noise from misdirected air. What it does:

• Channels air from the fan/blower to the correct vents or components
• Helps maintain even cooling and prevents hot spots near electronics or food compartments
• Reduces vibration-related rattles by securing the fan's airflow path
• Common symptom: airflow is weak, noisy, or misdirected when the guide is damaged or missing

• One fan guide

• High-level replacement — remove access panels and unplug appliance before starting
• Confirm correct orientation and secure mounting tabs/screws; avoid forcing plastic clips
• Use gloves to protect hands from sharp sheet metal edges inside the cabinet
• If airflow or noise persists after installation, inspect fan/blower and motor assembly for damage

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

This drain tray assembly collects and directs moisture and condensate to the drain system, helping prevent leaks and pooling under the appliance. Designed to fit the appliance's drain path and restore proper drainage. What it does:

• Captures condensate and channel water toward the drain to reduce standing moisture.
• Helps prevent water from pooling under components that could cause corrosion or odors.
• Restores proper drain routing after a damaged or cracked tray is removed.
• Works with existing hoses and clips to maintain normal drainage performance.

• Disconnect power and water before beginning repair.
• Remove access panels or components as needed to reach the drain tray; keep fasteners organized.
• Inspect surrounding seals, hoses, and clips and replace any worn parts to ensure a watertight fit.
• Reassemble panels and test the appliance for proper drainage and leaks before returning to service.