Need Help?
Call or text
Gas burner won't ignite or spark? This surface burner spark electrode generates the spark to light your cooktop burner. Moderate DIY repair.
Replaced ignitor. Read more
Fix burners that won't light or click continuously. This igniter electrode sparks to light gas burners. Easy 5-10 minute repair with a screwdriver.
Did some research to find out it was the electrode. Pulled out the old one to match what was on your site. It came in no time at all, and the replacement was a cinch. Read more
The Ignitor is an OEM replacement part for Frigidaire gas ranges. Located near the burner heads, this component is responsible for generating the electric spark required to light stove top burners. Symptoms of a faulty ignitor include:
Causes of ignitor failure can be an accumulation of deposits over many heating cycles. Physical damage from pots/pans is also possible. As electrical parts, ignitors have a limited lifespan depending on range usage.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Removed the bottom tin work in the oven and removed the burner tube. Tried to remove the igniter bracket but the screws were too tight for the Phillips head and couldn't get vice grips to clamp on the head, so I bent the bracket enough to remove and replace the igniter. Then reassembled. I give AppliancePros.com a 5 star rating. Site was easy to use, the part was delivered in under 2 days, and it was the correct part packaged carefully so the igniter was protected from breaking. Read more
Burner won't spark or ignite? This cooktop igniter electrode creates the spark needed to light gas burners. Simple DIY fix in under 30 minutes.
This is a Montgomery Ward gas range made by Tappan. Parts are no longer offered for this appliance. So, I had to eyeball various ignitors to determine which one would work. I settled on the least expensive one and ordered two (Just in case there were "issues"). The parts arrived quickly but were not a simple drop-in replacement. The new ones were longer and smaller in diameter. I had to use the original bracket because it provided the electrical ground for the spark. I used a spring to... Read more
The Spark Igniter is an OEM replacement part for Whirlpool gas ranges. Located inside the oven cavity it initiates combustion using high-voltage electricity. This is a broil igniter for the upper (broil) burner. Causes of malfunction relate primarily to element degradation from extended heating cycles. Exposure to grease or other residue accumulation shortens the service life by insulating the hot surface. Symptoms involve:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Called a repairman and he told us we needed to change a bunch of parts and would cost over $400! Decided to do some research online and found suggestions to replace the spark igniter. Decided to give it a try. Took about 10min to replace and oven is now working perfectly, for a total of $30! Read more
Burner won't light when you turn the knob? This spark electrode creates the electric arc that ignites your gas burner. Straightforward DIY repair.
Replaced Read more
Oven won't ignite or clicks but doesn't light? This bake burner with spark igniter fixes grounding issues and ignition failures. Easy DIY repair.
Replaced igniter under oven floor panel. Read more
Burner won't light or takes multiple attempts? This gas range igniter provides reliable spark to ignite your burner. DIY-friendly fix restores consistent starts.
Replaced all ignitors. Read more
Fix a broil burner that won't light or clicks repeatedly. This spark electrode generates the ignition spark needed for reliable broil operation.
I replaced the Gas Range Broil Burner Spark Electrode Read more
Fix a gas burner that won't light or clicks but doesn't ignite. This range surface burner igniter creates the spark to light your stovetop. 15-30 min repair.
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more
Oven won't light or heat? This flat-style gas oven igniter is the most common fix. Simple DIY repair takes 15-30 minutes with basic hand tools.
I put in a new igniter. Very simple Read more
Burner won't light or clicking with no spark? This igniter creates the spark to light gas burners. Easy press-fit installation takes 15 minutes.
I removed all the individual burners so I could lift the stainless cover to expose the igniter wires. I cleaned all the wire connections and the 4 good igniters and replaced the one bad igniter. Reassembly was easy and everything worked properly when done. Video of repair was helpful and all parts ordered were correct and shipped promptly and I will definitely use AppliancePartsPros again. Read more
Fix delayed oven ignition or gas odor with this spark electrode. Creates the spark that lights your oven burner. DIY repair in under 1 hour.
We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back. Read more
This spark igniter creates the arc that lights the gas burner, restoring quick, reliable ignition in your range or oven. Replacing a worn electrode helps eliminate hard starts, intermittent lighting, and nonstop clicking.
You guys saved me 1600+ Dollars!! After some research and testing I found the igniter for my stove was not working. The top burners worked, and the oven worked on broil. After watching the video on your website, I took lower pan and flame spreader out. I then turned on the stove and saw that the igniter was not glowing. I put in the model number for my stove on your website, and ordered a replacement igniter. In 2 days I received the igniter. It Installed with basic hand tools in about 15... Read more
Amperage range 3.2 to 3.6
Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more
Fix burners that won't light with this spark igniter electrode. Simple DIY repair—hardest part is accessing the back panel. Test for continuity first.
Internet suggested if yellow light happened time to replace. Bought two since I was having trouble with both for years. Would have been nice for a video to exist. The removal was nothing like what is out there and extended the time of the job. Read more