Kenmore / Sears Parts

This replacement vegetable crisper drawer fits the refrigerator's fresh food compartment. Replace a cracked, warped, or missing bin to restore clean, organized produce storage and proper fit within the existing crisper frame and rails.

• Holds fruits and vegetables in the crisper section of the refrigerator
• Works with the original crisper cover/frame to help retain humidity around produce
• Replaces bins that are cracked, broken, stained, or that won't slide/close correctly
• Helps organize contents and contain small spills in the fresh food compartment

• No tools required; remove food, then pull the old drawer forward to the stop
• Lift the front slightly and slide the drawer straight out of the rails
• Align the new drawer with the rails and slide it in until fully seated
• Do not force the drawer; ensure the crisper cover/frame is seated correctly for smooth operation

The Utility Pan is an OEM part for Whirlpool refrigerators. It is a storage drawer for various items in your refrigerator, such as deli meats, cheeses, and other small food items.

A bad utility drawer pan can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, breaks, or warping in the pan, it may be time to replace it.

Symptoms of a bad utility drawer pan include:

• Cracks or breaks in the pan
• Warping or misalignment of the pan
• Difficulty in opening or closing the drawer

Replace your damaged or worn-out utility drawer pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This rail is a direct-replacement support rail used in compatible Whirlpool appliances to restore proper component alignment and movement. It helps maintain smooth operation of the related assembly and prevents excessive wear on connected parts. What it does:

• Provides structural support and guidance for the moving assembly it mounts to
• Keeps panels, drawers or components aligned to prevent binding or uneven wear
• Restores smooth movement when a worn or damaged rail causes sticking or misalignment
• Helps prevent rattling or vibration from a loose or broken support rail

• One replacement rail

• Turn off power to the appliance and follow the manufacturer's safety instructions before starting work
• Use appropriate tools and retain all fasteners; inspect adjacent components while replacing the rail

This shelf and trim assembly replaces a damaged or worn refrigerator shelf trim to restore a secure shelf edge and improve storage stability. It provides the finished trim piece that retains items and keeps the shelf seated correctly. What it does:

• Replaces cracked, chipped, or missing shelf trim so food and containers stay securely on the shelf
• Restores the shelf edge that helps prevent items from sliding off when opening the door
• Re-establishes a proper fit between the shelf and cabinet for stable storage
• Helps maintain the refrigerator's interior appearance by replacing worn trim

• One shelf and trim assembly

• High-level replacement only — remove food and shelves before installing
• Use basic hand tools; avoid overtightening to prevent cracking the trim
• If the shelf is damaged, replace the shelf and trim together for best fit
• Disconnect power only if service requires accessing electrical components

The Door Basket is an OEM part for LG refrigerators. It is used to organize small items and provide additional storage directly on the refrigerator door. 

Symptoms of a bad door basket include:

• Items no longer stay securely in place during opening and closing  
• Sagging or misshapen basket that no longer organizes properly
• Detached basket that no longer mounts firmly on the door

Causes of a bad door basket can include warped or broken plastic, cracks or fractures in the plastic construction, or failure of the mounting brackets over time. 

This OEM LG replacement is also compatible with select Sears/Kenmore models.

This replacement freezer shelf restores a sturdy, level surface in the freezer compartment, helping you organize and support frozen foods safely. Replace a broken or missing shelf to regain capacity and neat, reliable storage.

• Provides a flat, stable surface for frozen items
• Seats securely on the factory shelf supports for proper fit
• Helps maintain intended spacing and airflow between levels
• Typical symptoms: cracked or broken shelf, sagging, won't sit level, or missing

• Disconnect power before working inside the appliance
• Remove food items and the old shelf; retain any reusable supports
• Align the new shelf with side rails or ledges and slide/settle into place
• Ensure the shelf is fully seated before reloading and avoid overloading

Replacement utility pan that fits under the oven cavity to catch spills and crumbs, helping protect the oven floor and simplify cleanup. Fits into the oven's lower compartment for routine baking and roasting use. What it does:

• Catches drips, grease and food debris to keep the oven bottom cleaner and reduce smoke from burnt spills.
• Helps prevent spills from reaching internal oven components and the kitchen floor.
• Restores proper fit and function when the original pan is missing, bent, or corroded.
• Works with standard oven racks and slides into the lower oven cavity.

• Disconnect power to the appliance before inspecting or servicing the oven to reduce shock risk.
• Allow the oven to cool completely before removing or installing the pan.
• Slide the pan into the lower oven cavity on the support rails; ensure it sits flat and does not interfere with rack movement.
• Clean with mild detergent and a nonabrasive cloth; avoid harsh cleaners that may damage the finish.

This replacement crisper glass is the clear shelf designed to sit over the refrigerator produce drawer, restoring a flat, stable surface for food storage and helping keep produce organized and visible. What it does:

• Replaces broken, cracked, or chipped crisper shelf glass to restore safe storage
• Provides a flat support surface for the crisper/produce drawer below
• Helps prevent items from falling into the drawer and improves visibility of contents
• Fits in the designated crisper opening and functions as the refrigerator's lower shelf glass

• 1 crisper glass shelf

• Handle carefully; glass can break—wear cut-resistant gloves and eye protection
• Remove food and drawers before replacing the glass; lift out old glass and set new glass into shelf rails or supports
• Do not force the glass into place; verify proper seating on rails to avoid shifting during use
• If damaged mounting clips or rails are present, replace them before installing the new glass

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This door basket is a replacement refrigerator door bin that restores secure storage on the door shelves, helping keep bottles, condiments and small items organized and upright. What it does:

• Replaces a cracked, broken or missing door bin so items no longer fall out when opening the door
• Provides a molded shelf edge to keep bottles and containers upright
• Restores original storage capacity and organization to the refrigerator door
• Designed to snap into the door shelf mounting points for a stable fit

• One refrigerator door basket

• Remove all items from the door before replacing the bin
• Align the bin with the door shelf mounting slots and press until it snaps into place
• No special tools typically required; handle with care to avoid cracking plastic

The Crisper Shelf Trim is an OEM part for Whirlpool bottom-mount refrigerators. It is a smooth plastic trim installed around the perimeter of refrigerator crisper shelves. The shelf trim works to contain humidity and gently guide vegetables back into place.

Causes of a damaged trim can include cracks or breaks from repeated impacts over time, or degraded plastic losing its structural integrity.

Symptoms of a faulty trim include:

• Vegetables spilling out beyond the shelf edges
• Excess moisture escaping the high-humidity crisper drawer  
• Potential accumulation of dirt in hard-to-reach shelf corners

This OEM replacement fits Whirlpool, Maytag, KitchenAid, and some Kenmore fridge models.

Note: Right Side

Note: Left Side

A replacement ladder shelf support that holds and stabilizes a refrigerator shelf or bin track so stored items stay level and secure. Restores proper shelf alignment and prevents shifting or sagging. What it does:

• Supports and aligns a refrigerator shelf or bin track to keep items stable
• Replaces broken, bent or cracked ladder pieces that cause shelves to tilt
• Helps stop shelves or bins from slipping forward or coming loose
• Compatible with common Whirlpool refrigerator shelf mounting points

• Disconnect power or unplug the appliance before starting any repair.
• Remove shelves or bins as needed to access the ladder; handle glass shelves carefully.
• Use basic hand tools; avoid forcing parts—inspect for damaged mounting clips or guides.

This front pan is the replacement cabinet front that restores the appliance's exterior fit and finish and helps protect internal components from debris and moisture. It's a direct-fit OEM-design panel for a proper appearance and protection. What it does:

• Replaces a cracked, dented, or rusted front panel to restore the appliance's exterior appearance
• Protects internal components and openings from dust, spills, and physical damage
• Helps maintain proper alignment of the door and control openings
• Prevents drafts and reduces the chance of moisture reaching internal parts

• One front pan

• Disconnect power (and water if applicable) before starting any repair
• Removal typically requires loosening fasteners and gently lifting the old panel out of retaining slots; keep track of screws and clips
• Handle the new panel carefully to avoid scratching or denting during installation

This grille enclosure replaces a damaged lower front grille to restore the appliance's appearance and protect internal components. It provides a secure cover that helps direct airflow and prevents debris from entering the cabinet. What it does:

• Covers and protects lower front components from dirt, dust and accidental contact
• Helps direct airflow around vents and intake areas for proper operation
• Restores a finished, gap-free appearance when the original grille is cracked or broken
• Reduces rattling caused by loose or damaged grille pieces

• One lower front grille enclosure

• Disconnect power before starting any repair to avoid electrical shock
• Remove nearby panels or kickplate screws/clips as needed for access
• Align tabs and secure with the factory screws or clips; do not force or bend mounting tabs