Kenmore / Sears Parts

This sliding shelf frame supports the refrigerator's shelf glass and allows the shelf to pull out for easier access to food. Replacing a cracked or warped frame restores a stable, level surface and smooth shelf movement.

• Supports the shelf glass and food load to keep items level and secure
• Enables slide-out access; helps the shelf move smoothly on its side supports
• Restores stability when the original frame is cracked, warped, or has broken support points
• Can help with issues like a shelf that sags, binds, or won't sit correctly

• Disconnect power and remove items from the shelf area before service
• Carefully lift out the shelf assembly; remove and set aside the glass insert
• Transfer any inserts/trim (such as the glass panel) to the new frame if your model uses them
• Seat the new frame on the side supports and verify smooth sliding action

This door basket is the removable bin that mounts to the refrigerator door and holds condiments, bottles, and small items. Replacing a broken or missing bin restores usable storage space and keeps items organized and easy to access.

• Mounts to the inner door liner to securely hold food items and beverages
• Helps organize frequently used items and maximizes door storage capacity
• Replace if the bin is cracked, warped, or the mounting tabs are broken
• Common symptoms: bin falls off, won't stay seated, or is missing

• Empty the old bin and lift it up and out of the door liner slots to remove.
• Align the new basket's hooks/tabs with the slots and press down until fully seated.
• Verify the bin is level and locked in place before loading items.
• Handle plastic carefully; allow it to warm to room temperature to reduce risk of cracking.

This replacement cover restores a clean, finished look and protects internal components inside your refrigerator. Replace a broken or missing cover to keep parts secured and the compartment properly enclosed for dependable everyday use.

• Conceals and protects internal components or hardware in the designated area
• Restores a secure, finished enclosure over the section it covers
• Common failure signs: cracked, warped, or missing cover
• Won't snap or stay in place; loose or rattling piece
• Exposed screws/hardware or items snagging on the opening

• Unplug the refrigerator before servicing
• Clear food items/shelves as needed to access the cover
• Release retaining tabs or remove mounting screws; transfer any reusable hardware
• Align and snap or fasten the new cover; verify secure fit before restoring power

This door bin (also called a door shelf) mounts to the inner door panel and holds bottles, jars, and condiments. Replacing a cracked or missing bin restores storage capacity and keeps items upright when you open and close the door.

• Adds organized storage space on the door for frequently used items
• Attaches to molded rails/tabs to hold contents securely during door movement
• Replace if the bin is cracked, warped, or the retaining hooks are broken
• Common symptoms: bin falls off, won't stay in place, items slide out, or the bin is missing

• Unplug the appliance before servicing
• Lift the old bin straight up and out of the door-liner tabs; transfer contents
• Align the new bin with the same slots and press down firmly until fully seated
• Distribute weight evenly and avoid overloading after installation

This replacement refrigerator door shelf bin is a cantilever-style bin that hooks onto the door rails to hold bottles and condiments. Replace a cracked, loose, or missing bin to restore secure in-door storage and keep items organized.

• Mounts to molded door rails to provide in-door storage for jars, bottles, and condiments
• Replaces cracked, warped, or broken bins and tabs
• Helps address bins that fall off, won't stay seated, or sit unevenly
• Restores original door storage capacity and organization

• Empty the bin, then lift up and out to remove the old bin
• Align the bin's hooks/tabs with the door rails and press down until fully seated
• Typically no tools required; do not force onto damaged rails
• Verify the bin is locked in place before reloading items

The Refrigerator Vegetable Shelf Cover Assembly is designed to enhance the functionality of your Samsung refrigerator. This genuine OEM part fits securely above the vegetable crisper drawers, providing essential protection and additional shelf space. Crafted from durable materials, it helps keep your fruits and vegetables fresh by maintaining optimal storage conditions. The easy installation process ensures that you can quickly replace a cracked, missing, or damaged cover without hassle. Compatible with a wide range of Samsung refrigerator models, this cover assembly seamlessly integrates into your appliance, maintaining its original look and performance. By organizing your storage efficiently, the Refrigerator Vegetable Shelf Cover Assembly improves the overall organization of your fridge, making it easier to access and manage your produce. Investing in this genuine OEM part guarantees reliability and longevity, ensuring your refrigerator continues to operate smoothly and effectively.

This is the left side

This vegetable tray assembly replaces a broken or missing crisper drawer in your refrigerator. Restore smooth, reliable storage for produce so fruits and vegetables stay organized and easy to access in the fresh food compartment.

• Replaces a damaged or missing crisper/vegetable drawer
• Holds produce in the fresh food section under the crisper shelf
• Slides in and out on the refrigerator's existing rails for easy access
• Common signs of failure: cracked bin, broken tabs/front, drawer jams or falls off track, reduced storage capacity

• Empty the area; remove the crisper shelf/glass if required by your model
• Align the drawer with the existing rails and slide in—do not force
• Allow plastic parts to warm to room temperature before installation to reduce risk of cracking
• Wear cut-resistant gloves and handle any glass components carefully

The lower basket holds and organizes items in the bottom section of the freezer. Replace a bent, broken, or missing basket to restore tidy storage and easier access to food in the lower compartment.

• Provides stable, contained storage in the lower freezer area
• Replaces a damaged, bent, rusted, or missing lower basket
• Helps keep food visible and accessible, reducing clutter
• If the basket won't sit level or shows broken wires/coating, replacement is recommended

• Unplug the appliance before servicing
• Empty the compartment and lift out the old basket
• Set the new basket onto the lower supports and ensure it sits level and secure
• Reload items evenly to prevent tipping

This bracket holder assembly is a structural mount used to secure an internal component, keeping it properly positioned during operation. Replacing a cracked or loose bracket restores support and helps prevent vibration, rattling, and misalignment.

• Provides a fixed mounting point to hold the supported part in place
• Maintains alignment to reduce vibration, rubbing, or noise
• Helps prevent shifting that can lead to premature wear
• Common symptoms: broken tabs or cracks, loose/misaligned component, rattling noises, visible damage to the old bracket

• Disconnect power; shut off water or gas if applicable
• Note screw locations and orientation; take a photo before removal
• Transfer any reusable clips or hardware from the old bracket
• Tighten fasteners evenly and avoid over-tightening to prevent damage

This is the Right side.

This rail connector secures a slide rail to its mounting point, keeping the rail aligned and stable so the assembly moves smoothly. Replace a cracked, worn, or missing connector to restore proper tracking and support.

• Joins the slide rail to its bracket or panel to maintain alignment and support
• Helps the rail travel smoothly without binding or coming off track
• Replaces broken, warped, or missing connectors that allow rails to loosen
• Typical signs of failure: rail separates, wobbles, sags, or won't stay engaged

• Disconnect power to the appliance; remove items to access the rail safely
• Remove the drawer/shelf and rail as needed to reach the connector
• Release locking tabs or fasteners, transfer the rail to the new connector, and seat it fully
• Reinstall components and test for smooth travel; wear gloves to protect hands from sharp edges

This storage pan front is the replacement drawer front that restores the look and function of a refrigerator storage bin, keeping contents contained and helping drawers open and close smoothly. Designed to match OEM fit and finish. What it does:

• Replaces a cracked, chipped or broken drawer/front that won't stay attached
• Keeps stored food and produce contained in the lower storage bin
• Restores proper alignment so the drawer slides and seals correctly
• Prevents items from falling out when opening or closing the drawer

• One storage pan front (single piece) as shown

• Remove contents and the full drawer/bin before replacing the front to avoid damage
• Most replacements snap or slide into existing tracks; no special tools required for many models
• Handle part carefully to avoid scratching; wear gloves if needed to protect hands
• Ensure proper seating before use

This interior refrigerator glass shelf replaces a damaged or missing shelf, restoring a stable, easy-to-clean surface for storing food and containers. Its flat design helps keep items organized and visible. What it does:

• Provides a stable, flat surface for food, containers and small items.
• Replaces cracked, chipped, shattered or missing shelf glass.
• Easy-to-clean surface helps contain spills and reduce odors.
• Intended as a replacement for the factory shelf when installed on existing supports.

• Remove food and any loose items before removing or installing the shelf.
• Wear cut-resistant gloves and handle the glass by its edges to avoid injury.
• Slide or set the shelf into the existing tracks or ledges without forcing; ensure it sits level.
• If shelf clips, rails or supports are damaged, replace those parts separately before installing the glass.

This Door Basket Assembly restores secure, convenient storage on your refrigerator door. Replace a cracked or missing bin to keep items organized and help the door close and seal properly. What it does:

• Provides storage space on the inner door for bottles, condiments, and small items
• Helps keep items contained so they don't shift or interfere with the door gasket
• Restore function when the original bin is cracked, chipped, warped, or will not stay seated
• Common symptoms: loose or broken bin, items falling from the door, difficulty closing the door

• 1 door basket assembly

• Unload the door; lift the damaged bin straight up and out of the door-liner slots
• Align the replacement with the mounting tabs and slide or press down until fully seated on both sides
• Do not force; re-seat if resistance is felt to avoid breaking the tabs
• Verify a secure fit before reloading and avoid overloading the bin

• Many refrigerators use multiple, position-specific door bins. Compare the shape and mounting tabs to your original before ordering.