Kenmore / Sears Hose Or Tube

This Whirlpool Water Line is an OEM part specifically designed for compatibility with select Whirlpool refrigerator models. It plays a key role in supplying water to the refrigerator's ice maker and water dispenser, ensuring a consistent and reliable flow of water.

Over time, water lines can develop issues such as wear and tear, kinking, or mineral buildup from hard water. These problems can lead to reduced water flow, potential leaks, or in some cases, complete blockage, affecting the functionality of the refrigerator's water dispenser and ice maker.

Symptoms of a bad water line include:

• Reduced water flow from the dispenser or to the ice maker.
• The ice maker produces smaller or misshapen ice cubes.
• Unexplained water leakage near the refrigerator.
• Visible wear, kinks, or damage to the water line.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This filter assembly head secures the refrigerator water filter and routes filtered water to the dispenser and icemaker. It restores proper filter seating and helps stop leaks or loss of water flow when the head is damaged or worn. What it does:

• Holds and seals the water filter cartridge so water passes through the filter element before dispensing
• Directs filtered water to the dispenser and icemaker plumbing
• Replaces cracked or warped housing that can cause leaks or poor filter seating
• Helps resolve intermittent water flow, leaks, or a filter that won't stay locked in place

• One filter assembly head as shown

• Turn off the refrigerator water supply and run the dispenser until flow stops to relieve pressure before removing the old head
• Inspect and lubricate O-rings with a food-safe silicone grease if reusing, or replace O-rings if damaged
• Hand-tighten the filter per manufacturer guidance; check all fittings for leaks after restoring water

The Water Line is an OEM part for Whirlpool refrigerators. As a component of the refrigerator's internal plumbing system, this water line connects the water filter housing to either the ice maker or water dispenser valve. 

Causes of a bad water line can include kinks, cracks or splits developing over time from normal use and vibration inside the refrigerator walls. Mineral deposits may also cause restrictive buildup within the line.  

Symptoms of water line issues include:

• Slow or interrupted water/ice production  
• Water leaks near the connections
• Mineral/foreign debris appearing in ice or dispensed water
• Water filter or valve malfunctions

This OEM replacement line is compatible with many Whirlpool, Kenmore, KitchenAid and other refrigerator brands.

This drain hose routes wastewater from the appliance to the household drain so your unit can empty reliably. It replaces a damaged or clogged hose to help stop backups and leaks when installed correctly. What it does

• Carries wash and condensation water from the appliance to the drain line.
• Restores normal draining when the original hose is cracked, split, or clogged.
• Helps prevent water pooling inside or beneath the appliance when properly connected.
• Works with household drain fittings—ensure proper routing and secure clamps.

• Disconnect power and turn off water supply before servicing.
• Route hose without sharp bends or kinks; secure with clamps at both connections.
• Inspect hose ends and replace clamps if corroded; test for leaks after installation.

This water inlet tube directs incoming water from the valve to the refrigerator's dispenser/ice system, restoring proper water delivery and reducing leaks. Reliable tubing helps maintain normal dispenser and ice-maker operation. What it does:

• Channels water from the inlet valve to internal dispenser or ice-maker lines
• Prevents leaks caused by damaged, cracked, or clogged inlet tubing
• Restores normal water flow for ice production and door dispenser use
• Helps eliminate intermittent dispensing or slow ice production related to inlet line issues

• One water inlet tube as shown

• Disconnect power and shut off the water supply before starting any repair
• Inspect fittings and seals; replace any damaged clamps or grommets for a secure connection
• Use appropriate tools and tighten fittings to OEM torque—do not overtighten plastic fittings

This Tube-Feed supplies water to the appliance's ice/water system, restoring proper water flow to the ice maker or dispenser. A direct-fit replacement that helps stop reduced ice production or interrupted water delivery. What it does:

• Routes incoming water from the inlet to the ice maker or dispenser assembly
• Restores proper water flow when the original tube is cracked, kinked, or clogged
• Helps stop leaks or puddling caused by damaged tubing when installed correctly
• Works with the appliance's original fittings and seals to maintain a secure connection

• One Tube-Feed

• Disconnect power and shut off the water supply before starting any repair
• Inspect fittings and seals; replace any damaged clamps or gaskets for a watertight connection
• Avoid sharp bends or kinks when routing the tube; secure with existing clips
• Turn water back on and check all connections carefully for leaks before restoring power

This replacement 5-foot fill hose with elbow delivers water from the household supply to the appliance, restoring proper fill flow and helping stop leaks from worn or damaged inlet lines. Designed as a direct-replacement assembly for compatible refrigerators. What it does:

• Carries water from the supply valve to the appliance's inlet connection.
• Elbow fitting provides a low-profile connection to reduce kinking at tight inlets.
• Replaces cracked, split, or leaking hoses that can cause slow/no fill or visible leaks.
• Restores reliable water delivery for ice makers and dispensers when the original hose is failing.

• Two 5' fill hoses with elbow fittings (quantity: 2).

• Shut off the water supply and unplug the appliance before starting any work.
• Inspect fittings and replace any damaged clamps; hand-start fittings, then tighten with an appropriate wrench—do not overtighten.
• Check for leaks after turning the water back on and run a fill cycle to verify proper operation.

This replacement hose routes water where the appliance needs it, helping restore proper filling and draining to prevent leaks or poor performance. Designed to match the original fitting and flow path for a reliable repair. What it does:

• Directs water between components to enable normal fill and drain cycles
• Prevents leaks when properly connected and clamped
• Restores proper drainage and prevents standing water or slow emptying
• Helps stop symptoms like intermittent filling, error codes related to water flow, or visible leaking

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any worn clamps or fittings for a secure seal
• Route hose as original to avoid kinks and ensure proper flow

The Refrigerator PVC Tube is an essential component designed to maintain the optimal performance of your Samsung refrigerator. Crafted from high-quality PVC, this genuine OEM part ensures durability and reliability, matching the exact specifications of your original tubing. Compatible with a wide range of Samsung refrigerator models, the Refrigerator PVC Tube provides a secure fit that seamlessly integrates with your applianceGÇÖs existing systems. Installing this tube helps regulate the flow of refrigerant, contributing to efficient cooling and preventing potential leaks or malfunctions. By replacing a worn or damaged tube with this genuine OEM part, you can restore your refrigeratorGÇÖs functionality and extend its lifespan. The Refrigerator PVC Tube is easy to install, making it a convenient solution for DIY repairs. Whether youGÇÖre addressing a minor issue or performing routine maintenance, this PVC tube offers the quality and performance you expect from Samsung. Enhance your refrigeratorGÇÖs reliability and ensure it operates smoothly with the Refrigerator PVC Tube .

The Refrigerator Drain Connector is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part ensures proper drainage within your appliance, effectively preventing leaks and water buildup. Designed specifically for Samsung refrigerator models, it guarantees a secure and precise fit, making installation straightforward and hassle-free. The high-quality materials used in the Drain Connector enhance durability, allowing it to withstand daily use and maintain reliable functionality over time. By replacing a worn or damaged drain connector with this genuine OEM part, you can restore your refrigeratorGÇÖs efficiency and prolong its lifespan. Keeping your refrigerator's drainage system in excellent condition helps maintain a clean and hygienic environment for your food storage. Choose the Refrigerator Drain Connector to ensure your Samsung appliance operates smoothly and continues to provide the dependable cooling performance you expect.