Kenmore / Sears Refrigerator Drawer, Shelf, Pan

The Door Shelf Bin is an OEM part for Frigidaire refrigerators. It serves as a storage space attached to the inner door panel, providing convenient access to frequently used items such as drinks, condiments, and snacks. 

A bad door shelf bin can result from several factors, including overloading, which can cause the bin to crack or break; the normal wear and tear of daily use, leading to deterioration of the plastic material; or accidents, such as the bin being dropped during cleaning, which can lead to cracks or breaks.

Symptoms of a bad Door Shelf Bin include:

• Difficulty fitting into its designated spot on the door
• Visible cracks or breaks in the plastic
• The bin sagging or detaching from the door when loaded with items
• Difficulty cleaning due to scratches or damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It is a crucial component that provides structural support and stability for the door racks or bins, ensuring they remain securely in place even when loaded with items.

Symptoms of a bad refrigerator door rack support include:

• Door racks or bins becoming loose or unstable
• Racks or bins not aligning properly when the door is closed
• Items falling off the racks due to lack of support

Causes of a bad door rack support can range from physical damage due to impact or excessive force to general wear and tear over time, which can weaken or deform the support.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

For the right-hand side order 240311502.

The Crisper Glass Insert is an OEM part for Frigidaire refrigerators, designed to fit over the crisper drawers. This glass insert provides a sturdy and flat surface for storing fruits, vegetables, and other items in the refrigerator's crisper section, helping to maintain optimal humidity levels and keep produce fresh longer. The glass measures approximately 17.12 inches X 15.40 inches.

Symptoms of a failing Crisper Glass Insert include:

• Cracks or chips in the glass
• Difficulty fitting the glass properly due to damage
• Excessive scratching that obscures visibility

Causes of a bad Crisper Glass Insert can range from accidental damage, such as dropping heavy items on the glass, to normal wear and tear over time. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Freezer Shelf is an OEM replacement part for  Frigidaire freezers. It is a sturdy and durable wire or glass shelf designed to provide ample storage space within the freezer compartment, allowing you to organize and easily access frozen items. Measuring approximately 24-1/2" W x 12-1/2" D x 5/32" H, the shelf requires no hardware or tools for installation.

Causes of needing to replace a freezer shelf can include physical damage from impact or excessive force, warping or deformation due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.

Symptoms of a bad freezer shelf include:

• Visible cracks or bends in the shelf material
• The shelf becoming loose or unstable, causing items to slide off
• Difficulty sliding the shelf in and out of its designated position

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Pantry Lid is an OEM part for Whirlpool refrigerators. It serves as a cover for the pantry drawer, helping to maintain the appropriate humidity levels to preserve the freshness of fruits, vegetables, and other perishables. This lid also aids in keeping the refrigerator organized by compartmentalizing different food items, thus optimizing storage space and accessibility. It measures roughly 28 and 3/16” in length and is white in color.

Symptoms of a bad Pantry Lid include:

• Difficulty in sliding or fitting the lid properly, which may affect the seal and temperature regulation within the drawer.
• Cracks or breaks in the lid, compromising its structural integrity and aesthetic appeal.
• Warping or deformation that prevents it from closing fully or sitting flush with other surfaces in the refrigerator.

Causes of a bad pantry lid can include physical impacts from loading or retrieving items from the refrigerator, material fatigue from regular use, or environmental factors such as temperature fluctuations within the fridge that can stress the plastic.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Rack is an OEM part for Frigidaire refrigerators. This component provides additional storage on the refrigerator door, allowing for convenient organization of bottles, jars, and other small items. This white door bar measures approximately 20.27 inches.

Causes of a bad door rack can include cracking or breaking due to heavy items being stored on it, wear and tear from frequent use, or damage from impacts or mishandling. Exposure to extreme temperature changes can also weaken the plastic over time.

Symptoms of a bad door rack include:

• The rack falling off or not staying securely in place
• Visible cracks or damage to the rack
• Difficulty in attaching the rack to the door
• Items not being held securely and falling out when the door is opened

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Front Shelf Trim is an OEM part for Frigidaire refrigerators. This part enhances the appearance and functionality of refrigerator shelves by providing a finished look and preventing items from sliding off. The trim snaps onto the front edge of refrigerator shelves, adding stability and a sleek, polished appearance to the shelving unit.

Over time, the front shelf trim can become cracked, discolored, or even break due to frequent cleaning, exposure to cold temperatures, or accidental damage. This can lead to a less secure shelf edge, which might not effectively prevent items from sliding off as intended.

Symptoms of a bad Front Shelf Trim include:

• Visible cracks or breaks in the trim
• Difficulty in fitting or staying attached to the shelf
• Aesthetic issues such as discoloration or warping
• Reduced effectiveness in preventing items from sliding off the shelf

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Rear Shelf Trim is an OEM part for Frigidaire refrigerators. It is designed to fit along the back edge of refrigerator shelves, providing a clean, finished look and helping to prevent items from sliding off the back of the shelf. 

Symptoms of a bad Rear Shelf Trim include:

• The trim becoming loose or detaching from the shelf, which can cause items to fall off more easily.
• Cracking or breaking of the trim, which may compromise the structural integrity of the shelf.
• Wear and discoloration that diminishes the aesthetic appearance of the refrigerator interior.

Causes of a bad rear shelf trim can include frequent removal or adjustment of shelves during cleaning or reorganization, physical impacts from storing or removing items, or the natural aging process that can make plastic components brittle over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Support Rail is an OEM part for LG refrigerators. This component is essential for supporting and guiding the freezer basket, allowing it to slide in and out smoothly. The rail measures approximately 13 x 2 inches.

Symptoms of a failing Freezer Basket Support Rail include:

• Difficulty sliding the freezer basket in and out
• Unusual noises such as grinding or squeaking when moving the basket
• The basket becoming misaligned or tilting when pulled
• Visible wear or damage to the rail

Causes of a bad support rail often include mechanical stress from overloading the basket, frequent use which can wear down the material, or accidental damage during cleaning or rearranging items within the freezer.

This OEM LG part is also compatible with Sears/Kenmore.

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. It serves as a lid or shelf above the crisper drawers, where fruits and vegetables are stored. This cover helps maintain humidity levels in the crisper compartments, preserving the freshness and extending the life of perishable items. It also provides additional shelving space for other items, enhancing the refrigerator's storage efficiency. The cover measures approximately 19-5/8" x 16-3/8". 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or damage that can impair structural integrity or aesthetics,
• Warping that affects fit and function within the refrigerator,
• Difficulty in sliding or removing the cover, which could indicate size changes due to temperature fluctuations or damage.

Causes of crisper pan cover failure often include physical impact from storing or removing items, environmental stress from cold temperatures, or material fatigue over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Meat Pan is an OEM part for Frigidaire refrigerators. This drawer is specifically designed to store meats and other perishables at an optimal temperature within your refrigerator. Its placement often allows for slightly different temperature conditions than the rest of the refrigerator, helping to keep meats fresher for longer. This bin measures approximately 18 inches long and 13 inches wide,

Symptoms of a failing meat pan include:

• Cracks or breaks in the pan that compromise its structural integrity
• Difficulty sliding the pan in and out due to damage or warping
• The pan not sealing properly, which can affect temperature regulation within the compartment

Causes of meat pan damage usually stem from overloading the drawer beyond its capacity, frequent and forceful use, or accidental damage from items being dropped on or in it.

This OEM part is compatible with Kenmore, Frigidaire, Crosley, Westinghouse, Electrolux, Kelvinator, and Gibson brands.

The Snack Pan Shelf is an OEM part for Whirlpool refrigerators. It provides an additional level of storage space on the inside.

The shelf is designed to fit securely on the side walls of the fridge cavity measuring 18 inches wide by 18-1/2 inches deep. If you need a shelf with a curved front, order WPW10276348.

Symptoms of a bad snack pan shelf include:

• Cracks or breaks in the shelf material
• Inability to lock the shelf into the desired position
• Wobbling or instability
• Missing retainers that hold the shelf in place

Causes of a bad shelf can be normal wear and tear over time from repeated removal and washing. Accidental drops or impact damage may also affect structural integrity.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Crisper Pan is an OEM part for Whirlpool refrigerators. This component, often referred to as a crisper drawer, is designed to store fruits and vegetables at optimal humidity levels, helping to keep produce fresh for longer periods. It fits into the refrigerator's designated crisper area, providing an organized space for fresh food items. The pan measures approximately 13 inches by 10 inches at the base.

Symptoms of a failing Crisper Pan include:

• Cracks or damage to the plastic, which can cause spills or make the drawer difficult to slide in and out
• The pan not fitting properly into its designated slot, leading to a loose or wobbly fit
• Reduced ability to maintain optimal humidity levels, causing produce to spoil faster
• Difficulty in opening or closing the drawer smoothly

Causes of a bad crisper pan can include regular wear and tear from frequent use, physical damage from heavy items or impacts, and exposure to extreme temperatures or cleaning chemicals that can degrade the plastic over time.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

The Refrigerator Door Shelf is an OEM part for Frigidaire refrigerators. This shelf attaches to the inside of the refrigerator door, offering additional storage space for frequently accessed items such as drinks, condiments, and snacks. It measures approximately 15 inches wide, 4 inches high, and 8 inches deep. 

Symptoms of a bad refrigerator door shelf include:

• Cracks or breaks in the shelf that compromise its ability to hold items
• The shelf detaching from the door or sagging under weight
• Difficulty fitting the shelf securely into its designated slots

Causes of damage to refrigerator door shelves typically involve overloading beyond their weight capacity, impact from items being moved in and out, or degradation of the plastic clips that hold the shelf in place due to age and frequent temperature changes.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Holder Crisper Meat Pan is an OEM part for Whirlpool refrigerators. This holder provides support and stability for the crisper or meat pan, ensuring it slides in and out smoothly while securely holding the contents. Its dimensions are roughly 12 inches by 16 inches.

Causes of a bad holder crisper meat pan can include regular wear and tear, damage from overloading, or cracks and breaks due to mishandling. A damaged holder can lead to misalignment of the crisper or meat pan, making it difficult to use effectively.

Symptoms of a bad Holder Crisper Meat Pan include:

• The crisper or meat pan not sliding in and out smoothly
• The pan not staying in place or feeling loose
• Visible cracks or breaks in the holder
• Difficulty in accessing or organizing items within the pan

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: PER FACTORY DOES NOT COME WITH GLASS FOR FRAME

• WITH GLASS ORDER PART # W11263198 

The Pan Slide is an OEM part for Whirlpool refrigerators, designed to support and facilitate the smooth gliding of crisper or deli drawers. It attaches to the refrigerator's interior wall, providing a track for the drawers to slide in and out easily. This ensures that users can access their stored food items with convenience and minimal effort.

Causes of a bad Pan Slide can include physical damage from overloading the drawers, wear and tear from frequent use, or cracking due to temperature variations within the refrigerator. 

Symptoms of a bad Pan Slide include:

• Crisper or deli drawers sticking or difficult to move
• Visible cracks or breaks in the pan slide
• Drawers that sag or fall off the track when opened

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.