Kenmore / Sears Refrigerator Gasket & Seal

• Door sweating

New seal, old one pulled out easy and new one pushed into place. Read more

Let the gaskets straighten out a bit overnight. Pulled out the old gasket, Cleaned and dried the area well though almost all the mold was in the old gasket. Pressed in the new gasket. Use a hairdryer to warm up and press the slightly deformed areas of the gasket into place. Quick and EASY. Read more

Ordered the parts online and fixed it myself. Read more

Replaced it with a new one from appliance which we received in one day Read more

Removed the worn gasket, cleaned the door, snapped on the new gasket. Read more

• Fridge too warm

Unfortunately, this model has the screws that you need to loosen before you can squeeze the rubber in but the gaskets fit perfectly. It took a lot more time than the video showed but that was because the video was of the pop in type. Be sure when pushing the rubber under the metal strip you make sure it actually goes in. I think the last people installed the gaskets incorrectly and that's why they broke and pulled out of place. Unscrew the bolts first, I used an electric drill. The old gasket... Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

Refrigerator door gasket. I ordered one gasket from you guys, it was so easy to replace. Everything is working fine Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

Located appropriately sized door gaskets. Read more

Removed old handle pieces and replaced with new. Removed wrinkles from new gasket then removed old and replaced no tools needed. Read more

I tried unsuccessfully to find the model numbers for these two appliances until I called your company and your representative found them immediately and sent me the parts I think that the same day or the next day. Instructions were clear and easy and I installed them within moments, neither one was any trouble. Read more

Replaced Gasket. Read more