Kenmore / Sears Spray Arm & Related

The Upper Spray Arm is an OEM part for Whirlpool dishwashers. It is responsible for distributing water throughout the upper part of the dishwasher during the wash cycle, ensuring dishes are cleaned effectively.

Causes of a bad upper spray arm can include clogging from food particles, mineral deposits from hard water, or physical damage to the spray arm. These issues can impede the spray arm's ability to rotate and distribute water properly.

Symptoms of a bad upper spray arm include:

• Poor cleaning performance on the top rack
• Spray arm not spinning
• Visible damage or clogging of the spray arm holes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the spray arm retainer, use part number WP3400918.

The Middle Spray Arm is an OEM replacement part for Bosch dishwashers. It is a rotating component located in the lower dishwasher rack that assists in evenly distributing water across dishes during the wash cycle. 

Symptoms of a bad spray arm include:

• Incomplete cleaning of dishes, even after multiple cycles  
• Soap scum or food soils remaining in hard-to-reach areas
• Dishes coming out either spotty or dry in areas not rinsed properly

Causes of spray arm failure can be worn out or damaged arm brackets preventing proper rotation, cracks in the arm itself inhibiting water coverage, or mineral buildup inhibiting 360-degree rotation. 

This OEM Bosch replacement part is also compatible with some Thermador, Gaggenau, and Kenmore dishwashers.

The Lower Spray Arm Support is an OEM part for Frigidaire dishwashers. This support provides a secure attachment point for the lower spray arm, ensuring it rotates freely and distributes water evenly throughout the dishwasher for effective cleaning. It helps maintain the stability and proper function of the lower spray arm.

Common causes of a bad lower spray arm support include wear and tear, physical damage from loading or unloading dishes, and blockages that impede the spray arm's movement.

Symptoms of a bad lower spray arm support include:

• The lower spray arm not rotating properly
• Poor cleaning performance on the lower rack
• Unusual noises during the wash cycle
• The lower spray arm falling off or becoming loose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rinse Arm Spinner is an OEM part for Whirlpool dishwashers. As a rotating spray component, it assists water dispersion across the upper basket during rinse cycles.  

Heavy accumulations of food or mineral deposits left over after many cycles can potentially clog or restrict rotation over time. Natural wear from cycle after cycle also affects plastic and rubber parts.

Symptoms of a faulty upper rinse arm spinner include:

• Improper or uneven coverage of water on dishes in the top rack  
• Stubborn food or residue remaining in hard-to-reach areas
• Less effective drying results on upper dishware
• Abnormal squeaking, and rubbing noises from the spray arm area

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This OEM Replacement Part is a designed nut to secure the Frigidaire dishwasher's spray arm. With dimensions of 2.0" x 2.0" x 0.6", this nut ensures a snug fit between the lower spray arm and the filter. It helps maintain the stability of the spray arm and enhances the overall performance of the dishwasher. The nut plays a role in preventing leakages at the bottom of the spray arm. If such a leak occurs, it may be indicative of a faulty nut. A timely replacement of this nut can ensure the proper functioning of the dishwasher. This part is compatible with select Frigidaire brand models including Crosley, Kenmore, Tappan, White Westinghouse.

The Lower Spray Arm Hub is an OEM replacement part for Whirlpool built-in dishwashers. It is a central component that secures the rotating lower wash arm during the wash cycle. 

Causes of a bad lower spray arm hub involve general wear from years of repeated wash cycles. Mineral buildup accumulating inside may also deteriorate connecting surfaces over time.

Symptoms of a compromised hub include: 

• Loose, detached lower wash arm that does not rotate properly
• Mineral deposits or food debris caught in the hub impeding arm movement   
• Excessive noise, clanking sounds, or vibrations emanating from the lower basket
• Poor lower rack cleaning leaving residual food soils after wash cycles

Compatible brands also include KitchenAid, Jenn-Air, and some Kenmore built-in dishwasher models. 

Note: Also Order Spray Arm Seal: WP8268340

The Lower Spray Arm Support is an OEM replacement part for Whirlpool built-in dishwashers. Attached underneath the wash arms enclosure, this bracket securely anchors the rotating lower spray arm inside the lower dishrack.

Causes of failure involve cracking or stripping of securing clips allowing excessive movement during high-pressure spray cycles. Mineral buildup over time can also obstruct smooth operation.

Symptoms consist of:

• Detached lower spray arm failing to thoroughly rinse lower rack dishes
• Abnormal noises and vibrations from mobility during operation
• Ineffective cleaning even on light soil levels
• The lower spray arm not rotating or spinning freely during wash cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

To order seal use WP8268340.

The Spray Arm Assembly is an OEM part for GE dishwashers. This component is located at the bottom of the dishwasher and is responsible for distributing water to clean the dishes during the wash cycle. It rotates to ensure that water reaches all areas within the dishwasher, providing thorough cleaning of the dishes.

Causes of a bad spray arm assembly can include clogging due to food particles or debris, wear and tear from regular use, or damage from improper loading of items. Such issues can obstruct water flow or prevent the spray arm from rotating effectively, leading to suboptimal cleaning performance.

Symptoms of a bad spray arm assembly include:

• Dishes not being cleaned properly
• Inconsistent water spray patterns
• Noisy operation during the wash cycle
• The spray arm not rotating or moving smoothly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Middle spray arm is an OEM replacement part for Whirlpool dishwashers. Located inside the dishwasher tub, this middle spray arm helps deliver water to dishes on all levels for optimal cleaning. 

Causes of a bad middle spray arm can include clogged or blocked spray holes, damaged or missing spray vanes or jets, or mechanical issues preventing rotation. 

Symptoms of a bad middle spray arm include:

• Inadequate cleaning, especially of dishes in the middle rack 
• Dried or caked-on food residue 
• Unbalanced water spray distribution 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Water Manifold Probe is an OEM replacement part for Whirlpool dishwashers. This probe monitors water levels during dishwasher cycles by sensing when the water valve opens and closes during different stages of cleaning and rinsing. It plays an integral role in ensuring the precise delivery of water at optimal temperatures and pressures. 

Symptoms of a bad water manifold probe include:

• Inability to sense proper water levels 
• Fault codes or error messages related to water levels
• Improper or failed dispenser of detergent
• Incomplete or inadequate wash and/or rinse cycles

Over time, probes can corrode, crack, or malfunction due to repetitive heating and cooling cycles. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Spray Arm is an OEM component compatible with GE dishwashers.The spray arm is responsible for distributing water throughout the dishwasher and cleaning dishes.

Causes involve mineral buildup obstructing water flow over time, or flexible arm components cracking under pressure.

Symptoms of a faulty lower spray arm include:

• Poor cleaning
• Slow or uneven spinning rotation during wash cycles
• Accumulation of food debris under the arm
• Leaking due to incorrect water distribution

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models

The Middle Spray Arm is an OEM replacement part for Whirlpool dishwashers. It is an integral component responsible for thoroughly washing dishes in the middle rack. Through its specially designed spray nozzles, the middle spray arm provides precise coverage for optimal cleaning.  Color: light gray. It measures approximately 19 inches wide.

Causes of a bad middle spray arm can include clogging or mineral buildup that blocks the spray nozzles over time. Damage, such as bent or broken arms, is another potential cause.

Symptoms of a bad middle spray arm include: 

• Dirty dishes remaining in the middle rack even after a cycle  
• Noticeable decrease in water pressure to the middle rack
• Spray from nozzles only partly hitting intended dish surfaces
• Arm mobility issues that prevent rotation during the cycle

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

The Spray Arm is an OEM part for Bosch dishwashers. It is responsible for evenly distributing water across the dish racks during wash cycles using a rotating arm and nozzle design.

Causes of a bad spray arm can include mineral or limescale buildup that inhibits water pressure/flow, or damage from accidental impact that impacts its rotation. Over time, normal wear and tear on plastic spray arms can also affect optimal spray coverage.

Symptoms of a bad spray arm include:

• Poor or uneven cleaning results
• Dirt or food debris remaining on dishes after cycles complete
• Clogs or blockages in the arm and nozzle openings

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is an upper spray arm mount that is a part of many types of dishwashers. The upper spray arm mount attaches the water supply manifold to the spray arm. This ensures that the water moves from the manifold into the spray arm so it can be used to spray water across dishes during a cycle. If the upper spray arm mount becomes damaged or cracked, it can cause the upper spray arm to fall off. This could create additional damage so the upper spray arm mount should be replaced.If the upper spray arm mount needs to be replaced, it can be done with the help of a 5/16-inch screwdriver. First, make sure the dishwasher is unplugged and the water supply has been turned off. Open up the door to the dishwasher and locate the upper spray arm. The mount will be attached to it. Use the screwdriver to remove it and install the new part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The upper spray arm mount is made to be compatible with dishwashers manufactured by Inglis, Kenmore, KitchenAid, and Whirlpool.

The Spray Arm Mount is an OEM part for Whirlpool dishwashers. This part allows the spray arm to rotate and spray water effectively to clean dishes. The mount ensures that the spray arm remains properly positioned and functions correctly during the wash cycle.

Causes of a bad spray arm mount can include wear and tear from frequent use, damage from heavy loads or improper loading of dishes, and exposure to harsh detergents and high temperatures.  

Symptoms of a bad spray arm mount include:

• The spray arm not rotating properly
• Poor cleaning results on dishes
• Unusual noises during the wash cycle
• The spray arm detaching or wobbling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Upper Spray Arm is an OEM part for LG dishwashers. This part is located at the top of the dishwasher tub, responsible for spraying water and detergent onto the upper rack of dishes during the wash cycle.

Causes of a bad Upper Spray Arm can include mineral buildup or debris clogging the spray holes, physical damage from impact or foreign objects, or wear and tear over time.

Symptoms of a faulty Upper Spray Arm include:

• Incomplete or ineffective washing of dishes on the upper rack
• Water not spraying evenly or not spraying at all from the upper arm
• Clogged or blocked spray holes
• Loud noises or grinding sounds during the wash cycle

This OEM LG part is also compatible with some Kenmore models.